Best Dx Current Transformer

4Pcs 100A/50mA SCT013000 Non-invasive Split Transformer Sensor SCT-013-000 Split Core Current Sensor Transformer

  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 4Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

Mini Mounted Point Set, 50 pcs.

  • The transformer has over current, over voltage, over heat protection.
  • With a drill bit, it becomes a hand drill, with a grinding wheel, it becomes a hand grinder, and with a milling cutter, it becomes a hand mill, very easy to use.
  • Wide application range and flexible to operate.
  • The handheld machine has seven standard grinding tools which is varied.
  • Suitable for processing wood, engineering plastics and soft metals.
Check Stock

ACEIRMC 8pcs HX711 Weighing Sensor Dual-Channel 24 Bit Precision A/D Module Pressure Sensor for Arduino Raspberry Pi Microcontroller

  • Analog Current Meter Module. Transformer can only sense AC.
  • This electricity sensor is based on TA12-100 current transformer, which can transform AC signals of large current into small amplitude signals..
  • 3-wire electronic block interface, input 5V - GND. S pin is the output analog voltage value..
  • You can use jumpers to select the parallel output of the output to adjust the range of analog values that are output..
  • On-board 3P and 4P connecting interface for current signal output can be easily connected with your MCU development board.
Check Stock

19.5V 4.62A 90W AC Adapter Laptop Charger for HP Envy Touchsmart Sleekbook 15 17 M6 M7 HP Pavilion 17 Pavilion 15 Notebook Series Power Supply Cord

  • WARRANTY: We are focusing on providing quality power products from factory direct sales and excellent customer service. Offer 30 Days 100% Money Return Guarantee and one year warranty..
  • HP Envy touch smart 17-j000 17-j010dx 17-j078ca.
  • COMPATIBILITY: HP Pavilion 14 15 17 M4 15-e010us 15-e020us 15-e043cl 15-n019wm 15-n065nr 17-e017dx 17-e019dx 17-e020dx 17-e020us 17-e021nr 17-e049wm 17-e055nr 17-e110dx.
  • FIT LAPTOP MODELS: HP ENVY TouchSmart Sleekbook M6, M7: m6-ae151dx m6-k000 m6-k001xx m6-k010dx m6-k012dx m6-k015dx m6-k022dx m6-k025dx m6-k054ca m6-k088ca m6-k125dx m6-n010dx m6-n012dx m6-n015dx m6-n113dx m6-p114dx m6-w011dx m6-w102dx m7-j000 m7-j010dx m7-j020dx m7-j120dx m7-k010dx m7-k111dx m7-k211dx m7-n011dx m7-n101dx m7-n109dx.
  • SAFETY: Replacement AC Adapter passed CE certified for safety, over Voltage protection, short circuit protection, over current protection..
  • POWER SPECS: Output: 19.5V ~ 4.62A ~ 90W , Input: 100~240V / 50~60Hz, Connector Tip: 4.5*3.0mm (Blue tips).
  • HP Envy touch smart sleek Book m6-k, m7-j, 15-j, 17-j Series.
Check Stock

AC Current Sensor Transformer, PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter Used for Energy Meter in Special,Current Sensors

  • ❤Specification❤Opening size: 13mm × 13mm.
  • lead length: 1.5 meters, standard Φ3.5 three-pin plug outpu.
  • ❤Applications❤Suitable for current measuring, monitoring and protection of AC motors, lighting equipment, air compressors, etc..
  • ❤Reliability❤Fully compatible with most similar products.
  • the number of opening and closing times is not less than 1000 (tested at 20℃).
  • this split core current transformer is particularly suitable which can use for a long time for DIY use and it works well with arduino and raspberry pi..
  • Non-linearity ± 3% (10% ~ 120% rated input current) two output forms of current and voltage (voltage output type built-in sampling resistor)..
  • Package Include 2Pcs x SCT-013-000 Split Core Current Transformer Sensor.
Check Stock

PEACEFAIR PZCT-02 Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter

  • SMALL AND LIGHT: This current transformer Built-in input coil.
  • SNAP JOINT STRUCTURE:The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • GOOD MECHANICAL PROPERTIES: Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • USED FOR ENERGY METER IN SPECIAL: Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied..
  • MINI SIZE:This is a mini split base current transformer.
  • it's the smallest one compared to the similar products (output 100MA)..
Check Stock

Beleeb 20Amp Variable Transformer Auto AC Voltage Regulator Power Supply, 2000VA Max, 0~130 Volt Output

  • a variable AC input to a transformer input DC bridge rectifier to produce a variable output.
  • The adjustable voltage transformers does not convert AC to DC. It requires an AC input and the output is also AC. Also, the unit will not affect the cycle rate from the power company. If your power system is providing 60Hz, the Variac auto transformer will not change that, the ouput will be an undistorted 60Hz. This unit is rated up to 20 Amps or 2KVA Peak (16A Continous)..
  • Power: 2000VA,Input voltage: 110V, Input current: 18A, Output voltage: 0-130V, Rated output current: 15.38A (Continuous operation for 2 hours, 003c10A can work continuously.
  • This variable transformer is the perfect speed controller. The speed is infinitely variable, and because a transformer doesn't chop up the AC waveform like electronic speed controllers do, there's no noise, humming, etc..
  • If you're planning on using this as an "industrial" or bench-top supply with heavy loads, I'd recommend examining the brushes and adjusting the spring pressure on the windings. This can improve performance by reducing brush-contact sparking. Otherwise, this device is ready to work right out of the box..
Check Stock

Doorbell Transformer, 16.7 ft Charging Cable 18V 500mA Video Doorbell Power Supply Adapter Compatible with Ring Doorbell/Zmodo Doorbell (Black)

  • 【Product Features】18V Doorbell Transformer, plugs into your standard 110 v/120 v outlet and converts to 18 volt 500 ma AC current. No more need to take your doorbell down to charge. Video doorbell Transformer can keep your device constantly powered..
  • 【Compatibility】18V 500mA Doorbell Transformer compatile with Zmodo smart greet wifi doorbell / Nest Hello doorbell.(Before purchasing, Please confirm that the voltage and current required by the doorbell are consistent with this power supply.).
  • 【Extra long cable】16.7ft is long enough, it can connect to your doorbell perfectly, don't worry about the distance between the socket and the doorbell..
  • 【Easy to install】(Regardless of positive or negative polarity).Simply attach the two rings to the doorbell and tighten the screws. The wire ring design makes it easier to install and helps ensure the Transformer is firmly connected to the doorbell. The wires are sturdy and flexible enough not to be easily torn..
  • 【After-sale service】: If you are not completely satisfied with our products, you can ask for a replacement or a full refund.If you have any questions, please feel free to contact us..
Check Stock

Leviton 1K240-2W Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Split Core CTs

  • Electricity tariff support 4 decimals, the decimal point can be set to 0 between 4. It supports 3 charges: simple tariff, time-sharing tariff and stage tariff. Time-sharing tariff support 8 time periods to calculate the cost, which can be used for peak and valley billing. Stage tariff support 8 stages power rates. You can set the date that begin to charge the stage billing.
  • It has the function of alarm, you can set values for voltage, current, or power. If they were exceeded, the monitor will alarm automatically.
  • It has the function of clearing the total electricity, history data and factory reset.
  • It supports 1000:1 or 2000:1 current transformer, the max current of the transformer is 120A.
Check Stock