Best Dual Extrusion 3d Printing

Official Creality 3D Printer Ender-5 S1 250mm/s High-Speed 3D Printers with 300 High-Temp Nozzle Direct Drive Extruder, CR Touch Auto Leveling, Stable Cube Frame High Precision,8.66X8.66X11.02 inch

  • ...ing time by 75% by refine motion system with a standalone motor at each X/Y/Z axis for up to 2000mm/s² acceleration, and a steel transmission shaft that connects and syncs the Y-axis belts. The 3D Printer alves the printing time and boosts efficiency..
  • 【Clog-free Direct Extrusion at 300℃】: The “Sprite” dual-gear direct extruder of the Ender 3d printer delivers a strong 80N extrusion force. The hotend features a titanium heatbreak blocking heat creep, a corrugated heatsink for rapid cooling, and a 50mm³ large melting chamber to fully melt the filament. It can print PLA, TPU, PETG, ABS, and more, clog-freely for 1,000 hours..
  • 【Stable Frame Underpins Quality】: An all-metal cube frame goes with the classic Cartesian structure. The stability is enhanced by thick linear shafts, extra gussets, two cantilevers, and silicone bed mounts. It ensures a 100% success rate for 1,000h printing at 250mm/s.
  • 【Auto-leveling and Smart Sensors】: The CR Touch probe realizes fully-automatic precise 16-point bed leveling. The Z-offset can be adjusted at 0.05 accuracy with touch control. It also....
Check Stock

Gizmo Dorks 1.75mm Nylon Filament 1kg / 2.2lbs for 3D Printers, Black

  • Industrial Strength Nylon Filament for Desktop 3D Printing. Alloy 910 is Trusted By the World's Leading Aerospace and Automotive Companies for High Performance 3D Printing.
  • 1.75mm Diameter 3D Printing Filament. Perfect for All 1.75mm 3D Printers. Recommended Extrusion Temperature: 250-255C. Trusted taulman3D Nylon. There is 1lb worth of printing material on the spool..
  • Made in America Spools, Ensuring You Can Trust That Quality and Consistency is of the Utmost Importance. This is a 1lb roll of 3d printing material..
  • Trusted By Leading Industrial and University Clients Around the World. Alloy 910 a Top Tier Nylon Filament for Desktop 3D Printing..
  • Materials Made by taulman3D Are Some of the Most Trusted and Utilized 3D Printing Filaments Worldwide..
Check Stock

Creality Official Sprite Extruder, All Metal Dual Gear Feeding Direct Drive Extruder with 80N Stepper Motor for Creality Ender-3 S1/Ender-3 S1 Pro/CR-10 Smart Pro 3D Printer

  • ... Support Printing Flexible and High Temperature Filament - With direct drive extruder and up to 300°C and all metal hotend kit, the creality sprite extruder supports 1.75 MM filaments, including PLA, TPU, PETG, ABS, PA, PC etc..
  • Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
  • Dual Gear Feeding, More Stable Printing -The Creality ender 3 pro direct drive adapt double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models..
  • Creality 3D Official Store - We are the ONLY Creality 3D Official store. There are more than 20 engineers for after-sales service and provide 24/7 customer service with 1-year limited and lifetime technical assistance. Please contact us via “ask a question”directly to get the professional assistance..
Check Stock

BIQU H2 Extruder, V2.0 New Upgraded Dual Gear Extruder, Smooth Not Easy to Block 3D Printer Direct Extruder 1.75mm Filament for BIQU B1, Ender & CR Series Printers, CR-10S Pro

  • ...Gear: using bimetallic tube (copper alloy + GRADE5 titanium alloy), high temperature resistance, durability, high precision, and higher surface finish. The output gear modulus design was changed from 0.5 to 0.25, reducing the gear outer diameter, effectively solving the weak points of V1.0 gear jamming and unsmooth extrusion..
  • ✔️All-in-one Design & High Precision: The short-range extruder integrates the hot end of the nozzle, extruder, stepping motor, cooling fan, etc., double-gear extrusion, fast extrusion of consumables, short-range extrusion, short thread, and accuracy High, the control of the feeding amount is more accurate than remote extrusion, the withdrawal is more accurate, and the printing quality is better..
  • ✔️Extremely Smooth & Reducing Clogging: The smoothness of the throat and the inner wall of the nozzle reaches Ra0.4, which can effectively prevent clogging. H2 V2.0 adopts high-quality titanium-copper alloy hose, which has better heat dissipation and high temperature resistance, and the printing temperature can be as high as 400°C. It is the best quality hose material on the market. The hose is easy to disassemble, making it easier to use. convenient..
  • ✔️Lightweight & Compact & Powerful: BIQU H2 extruder weighs only 219 grams....
Check Stock

Redrex Dual Gear Extruder Metal Drive Feeder Upgrade Kit for Creality Ender 3 V2 Ender 3 Pro CR10 Series 3D Printer TPU Filament Supported

  • 【Double Gear Extrusion Mechanism】:The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Spring Adjustable Extruder】The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and....
  • 【Application】:This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 5 Pro,CR10 S series 3D printer..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139..
Check Stock

Ultimaker S5 3D Printer

  • Newest large-format 3D printer from Ultimaker.
  • Dual extrusion capability for multi material prints.
  • Premium materials used in construction. Heated bed smooths prints and allows for ABS printing..
  • The innovative Print Core system allows for simple swapping of hot ends.
  • Water soluble supports allow for smooth surfaces and complex geometry.
Check Stock

R QIDI TECHNOLOGY X-CF Pro 3D Printers Industrial Grade,Specially Developed for Printing Carbon Fiber&Nylon with QIDI Fast Slicer, Automatic Leveling,Large Build Volume 11.8x9.8x11.8 Inch

  • 【Design Concept】X-CF PRO is a 3d printer specially designed for printing carbon fiber and nylon filaments.Independent research and development of the latest generation single extruder system, which uses high-temperature alloy material, dual-gear extrusion, can solve the problem of the accuracy is not very accurate or service life is not long when printing carbon fiber. Another set of normal high-speed extruder can easily print PLA, ABS, PETG and other filaments..
  • 【Precision Manufacturing Process】QIDI TECH using industrial-grade manufacturing, dual z-axis and industrial guide, can achieve high precision, fast printing. Upgrading the XYZ structure, all use of industrial slides. PEI printing plate, solve printing models warp and other problems.The 3d printer’s structure is developed for the effective and accurate printing of carbon fiber.Meanwile, printing other common filaments, the speed can be increased to 120cc per hour..
  • 【New technology upgrade】 A new automatic intelligent leveling mode, taking points up to 20 points to calculate the travel prime. With the new upgraded software, it is more intelligent, especially provide more effective and accurate parameters for printing carbon fiber and nylon filaments, which can be used right out of ....
Check Stock

Micro Swiss Direct Drive Extruder for Creality Ender 5

  • 【Official New Product from Creality】Sprite Extruder Pro Upgrade Kit enables all Ender 3 series 3D printers to have direct extrusion and high temperature printing conditions..
  • 【Better new design】Simulation of flow field mechanics and dual fan design results in powerful heat dissipation function and more stable model formation..
  • 【Double gear feeding, stable and reliable】The double tooth structure does not damage the consumables, and the feeding is more reliable and stable. Reduces the chance of clogged nozzles when retracting consumables and failures when loading new consumables. Full metal hot end kit with heating block, titanium throat and cooling block, allowing you to print high temperature materials up to 300°C..
  • 【Easy to install, more adaptable】Adaptable, Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 S1/Ender 3 Max/CR-10 Smart Pro 3D Printers, easy to install and use. It does not affect the inherent nature of the printer function as it is a complete extrusion kit. Comes with a long extruder motor connection cable, tools, accessories and wiring diagram instructions for installation and easy assembly..
Check Stock

Gizmo Dorks 3D Printer Filament 3mm (2.85mm) 200g, 4 Color Sample Pack - Flexible Red, Polycarbonate Blue, Nylon Clear, PETG Green

  • Bundle contains 4 sample spools each containing 200 grams of different 2.85mm diameter 3D printer filament: Flexible TPU Red, Polycarbonate Blue, Nylon Clear, and PETG Green.
  • Flexible TPU red filament has a shore hardness of 95A and can be used to print different flexible parts such as cellphone cases.
  • Polycarbonate blue 3D filament is extremely hard and durable as polycarbonate is used in many applications such as bullet proof glass.
  • Nylon 3D printing filament is a great engineering filament that has great wear resistance that can make specialty printed parts.
  • PETG filament combines all the benefits of PLA with ABS producing printed parts that are both strong and flexible.
Check Stock