Best 3d Printing Wood

AMOLEN Wood Filament Bundle,Walnut,Bamboo Wood,Red Wood,Black Wood,3D Printer Filament,PLA Filament 1.75mm,200g/Spool

  • 4 WOOD PLA FILAMENT BUNDLE - 4 different wood PLA filament with Walnut wood, Red wood, Bamboo and Ebony wood, each filament spool is 200g..
  • REAL WOOD/BAMBOO FIBER - There is 20% wood fiber in the walnut wood, red wood and ebony wood PLA Filament. The light color wood has 20% bamboo fiber. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

JG MAKER Large 3D Printer Artist-D IDEX Dual Extruder 3D Printers Direct Drive Extruder Linear Rail Large Build Volume 11.81x11.81x13.38in 98% ABS PLA PETG TPU Flexible 1.75mm (Artist-D 3D Printer)

  • WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches..
  • UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc..
  • RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost , printing volume reaches 8.27 x 8.27 x 8.07 inches..
  • ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print..
  • MORE FUNCTION: ①ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame ....
Check Stock

AMOLEN 3D Printer Filament, Ebony Wood PLA Filament 1.75mm, 3D Printing Filament with 20% Real Wood Fiber,1kg

  • REAL WOOD FIBER - There is 20% wood fiber in the ebony wood PLA Filament. Therefore, you will get a print like a real wood with matte face and even wood smell..
  • REFUSE TO CLOGGING - The finely ground wood particles, double filtration, no impurities, make your printing smoother. Good shaping, no bubble, no jamming, no warping, no brittle..
  • HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage..
  • ONE MONTH WARRANTY - Any problems, please contact us for free replacement or full refund. AMOLEN is committed to devolop high-quality and special filament..
  • Print Speed: 30-60mm/s, 40mm/s will be better.
Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

  • ...olor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
  • 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
  • 【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
  • 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
  • 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of 50-100mm/s..
Check Stock

LOTMAXX Shark V3 FDM 3D Printer Auto Leveling, 3D Printing/Laser Engraving/Dual-Color Multifunctional 3D Printer Printing Size 9.25x9.25x10.43in & Engraving Size 9.25x9.25in

  • Multifunctional 3D Printer: LOTMAXX Shark V3 is an FDM 3D printer with higher printing accuracy and speed. And it also supports two-color printing and laser engraving. The 1.6 W laser engraving allows you to engrave with a wide variety of materials like bamboo, ceramic tile, wood, leather, paper, etc..
  • Smart & Precise 3D Printer Auto Leveling: LOTMAXX Shark V3 3D Printer equipped with intelligent leveling tools. When using the product for the first time, it is recommended to level it manually before turning on automatic leveling to ensure printing accuracy..
  • Super Fast Cooling & LED Decoration: Structured dual extruder with 3 fans and 3 modes, supporting dual-color printing. Compatible with PLA/PLA+/Ultra filament. The Shark V3 print head is also equipped with led decoration. Not only can light up the darkness but also can fully enjoy the fun of printing..
  • Filament Sensor and Power Off Resume Printing: LOTMAXX Shark V3 features the function of detecting filament runout or breakage/power loss and resume printing after recovery. By accurately recording the printing data at the time of power outage/filament runout or breakage, it helps to avoid the waste of filaments and time caused by accidents..
  • Removable Touch Screen & Nano-coated Glass Plate: The TFT to....
Check Stock

SUNLU Silk Rainbow Filament, Shiny Multicolor Gradient PLA+ Filament 1.75mm, 1kg(2.2lbs)/Spool 3D Filament for 3D Printer & 3D Pen, Shiny Silk Rinbow Ⅰ

  • 【SUNLU Silk Rainbow 3D Filament 1.75mm】 Every color changes every 15-18 meters. The change from one color to another is random. Gradually multicolors make your print works more eye-catching and unique..
  • 【Shiny Multicolor Silk PLA+ filament 】Silk PLA+ printer filament is shiner than standard PLA. No need extra polishing, printing at a high gloss guarantee a more beautiful finish , it has a similar sheen as metal..
  • 【Easy To Use】 SUNLU 3D printer filament keeps improving the printing performance, Silk rainbow Ⅰ is easier to print smoothly, adhere to the printing platform, and it has less warping, less stringing..
  • 【No Ordor & No Clog & No Bubble】Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience.
  • Complete drying for 24 hours before vacuum aluminum foil packaging to effectively protect the Silk 3D filament from moisture..
  • 【All Lifetime Warranty | Rainbow PLA, PLA+, ABS, PETG, TPU, Wood, Carbon Fiber】Fast and effective 24 x 7 professional customer support providing technical solution. If SUNLU 3D Printer filament 1.75mm have any problem, please send email to us..
Check Stock

FLASHFORGE Guider IIS 3D Printer Auto Leveling with High Temperature Nozzle Large 3D Printer Built-in HD Camera, 280*250*300mm Printing Size for Industrial Use

  • ✅ 【Large Size & Auto Leveling】Guider IIs 3D Printer comes with a large build volume of 11.0 x 9.8 x 11.8 in / 280 x 250 x 300 mm, It can intelligently compensates the platform height through Z-axis during the printing process to realize automatic leveling. Simple operation and brings you greater printing experience..
  • ✅ 【300℃ High Temperature Nozzle & Support Various Filament】High filament compatibility. More printing possibilities. It shows great performance on 3d printing PLA, ABS, ASA, PVA, PETG, Nylon, HIPS, PA, PC, Wood, electrically conductive materials and various carbon fiber composite materials..
  • ✅ 【Dual Platform & Resume Printing】Good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible, making it easy to remove model. It can resume printing after power outage or any other unexpected stoppage, save time and filaments..
  • ✅【HEPA13 Air Filter & Built-in HD Camera】Guider IIs can adsorb impurities and gases generated by printing industrial filament. Helping to create a safe and comfortable indoor operati....
Check Stock

Creality 3D Printer Ender 3 S1 Pro 300℃ High-Temp Nozzle Sprite Full Metal Direct Drive Extruder CR Touch Auto Leveling PEI Bed Filament Sensor Printing Size 10.6X8.6X8.6inches

  • 【High-temp Passion, Good with Multiple Filaments】: For creality ender 3 s1 pro 3d printers, the most attracting thing is its good performance under high-temp conditions. The nozzle made of brass can stand up to 300℃ printing. It is compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA, creating numerous possibilities for the imagination. There is no need to change the nozzle even printing with different filaments, which is time-saving with enhanced efficiency..
  • 【“Sprite”, Small but Powerful】: Creality 3d printers uses the self-developed “Sprite” full Metal Dual-gear Direct Extruder. Same as its name, “Sprite”, it is small but powerful - weighing only 334g, but the extrusion force can be up to 80N. It enables smooth feeding when printing with diverse filaments, including those flexible materials, providing users with a stable and reliable printing journey..
  • 【Hassle-free Leveling】: This creality 3d printer equipped with CR Touch, the automatic leveling ensures perfect leveling by measuring the distance between the nozzle and the heat bed and accurately completes compensation. Therefore, Ender-3 S1 Pro is friendly,....
Check Stock

AMOLEN Dark Wood Walnut PLA Filament 1.75mm,Walnut 3D Printer Filament with 30% Real Wood Fiber,Wood Filament,1KG

  • HIGH COMPATIBILITY: AMOLEN PLA Filament is compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Printrbot, Solidoodle, Reprap, Mendel, MakerGear..
  • PREMIER MATERIAL: Made from PLA and wood particles. Prints just like normal PLA with gorgeous surface of wood color and texture. Extrusion temperature range: 190 - 220°C..
  • DIMENSIONAL ACCURACY: Diameter variance of no more than 30 microns for consistent feeding and better 3D prints..
  • SMOOTHLY PRINT: AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping..
  • HIGH PERFORMANCE: Orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PLA filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best..
Check Stock