Best Dc To Dc Power

B&K Precision 878B Dual Display Handheld Universal LCR Meter

  • Converts AC to DC: features AC to DC power supply Variable linear/ regulated design. Provides convenient and reliable AC-to-DC Power conversion W/ constant source of DC voltage. Works w/ cellular phones, CB radio, scanner, ham radio, etc.
  • Usb and Screw-Type terminals: This workbench linear variable power supply features dual USB charge port and universal screw connection terminals compatible w/ a wide range of device/equipment. Used to test device/equipment operation and performance.
  • Plug-in operation: The simple plug-in operation provides a constant source of DC voltage, allowing for quick and consistent power conversion. Switch-activated power control eliminates the need for an external battery or additional power source.
  • Short-circuit protection: Equipped w/ built-in electronic overload and short circuit protection to ensure the safety of the operator and any connected electronics. Has rugged and durable housing construction safe for benchtop or desktop Placement.
  • Amp gauge and volt meter display: this DC bench power supply is equipped with rotary control for the adjustable powe....
Check Stock

Dasiter 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer

  • 【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output.
  • ultra-low input and output pressure difference..
  • 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly..
  • 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load..
  • 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads.
  • the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time..
  • 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid.
Check Stock

Car & Freezer

  • Adjustable temperature range: -8°F to 50°F.
  • “Fast Freeze” mode rapidly cools to -8°F.
  • Voltage power AC (115V/ 60Hz – 70W/1.0A A) or DC (12V/24V – 5.2A /2.6A Car Lighter Socket).
  • unit can be plugged in with both AC power and the DC power at the same time. If both AC and DC are plugged in at the same time, then the unit will primarily operate on AC. If the AC power source fails, DC will become primary power supply source..
  • 8-feet AC power cord and 10-feet DC power cord.
  • Tough and solid outer powder coated steel housing.
  • Wattage: 70 Watts. Net weight: 52 LB. Internal dimensions: 21" W x 10" L x 15" H including a compressor step with 7.25″ W x 7.5″ H.
Check Stock

iGuerburn 24V DC Adapter for Resmed Airsense 10 Series, DC5521/DC5525 S10 CPAP Power Cord, DC Converter Work with Power Station Rockpals Progeny Medistrom

  • This 24V dc adapter only works for Resmed Airsense 10 series CPAP machine: Airsense 10 CPAP, Airsense 10 Elite, Airsense 10 AutoSet, Airsense 10 AutoSet for Her.Please don ’t use this resmed airsense 10 power cord with a 12v battery!.
  • The resmed s10 dc to dc converter can work with 24v power station with dc5521/dc5525 output socket. Such as: Medistrom Pilot-24 Lite, PROGENY 300w,Talentcell PB120B1, Progeny 300w..
  • Our airsense 10 dc adapter is 3.3ft, it’s easy to carry and long enough outdoors when you are camping. This resmed airsense 10 dc converter also can be bent at will..
  • This resmed airsense 10 dc power cord only works with some 24v battery with dc5521 / dc5525 output socket..
  • The Package includes: 1 Airsense 10 dc cable (DC plug size: 5.5mm x 2.1mm) + 1 connector (5.5mm x 2.5mm), please check the size of your battery pack output port before purchasing in order to work your airsense 10 cpap machine well..
Check Stock

Thomson Bicycle Stem Top Cap Black

  • This 12v 2a power adapter comes with 11 connectors in order to meet your more requirements. Max. ouput current is 2.0 amp it means that it can supply....
  • The 12v 2a power supply fits for many 12V household electronics like DVD player LED LCD screen which DC input rating current is less than 2000mA. such....
  • Input: AC 100-240V 50/60Hz, Output: DC 12 volt 2.0 amp (2000mA), Power: 24 Watt. US plug, Polarity: Center Positive (+). Power Cord Length: 5 Feet/....
  • Selected 11pcs various popular connectors which can be used for most of your 12V DC devices, DC Jack Dimensions: 6.3*3.0mm, 6.0*4.4mm, 5.0*1.0mm,....
  • What You Get: 12V 2A AC DC power adapter, 11 x Multi DC jacks, 30 days money back, 12 months exchange with free..
Check Stock

MILAPEAK Real 18AWG 10 Pairs 12V 5A DC Power Pigtail Barrel Plug Connector Cable 2.1mm x 5.5mm Male Female DC Pigtail Connectors for CCTV Security Camera and 12V Power Supply Adapter

  • ★【Real Thick 18AWG】- Real 18AWG vs Common 22AWG, real 18AWG are bigger wire than other 22AWG pigtails, as it has heavy gauge with 43 pcs 0.14 mm 100% copper strands inside one cable, total 86 pcs 0.14 mm copper strands inside the two Red / Black cables. This makes the difference when using with bigger power supplies, and allows them to be used for higher current devices, they should be good to 5A or even a touch more with real 18AWG..
  • ★【Safe & Rapid Transmission】- Heavy-duty quality with 43 x 0.14 mm 100% copper strands brings the reliable, secure connection and rapid transmission. 18AWG DC Power Pigtail Cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box..
  • ★【Easy Installation】- Easy to weld and install, as the ends of the DC power pigtail cables are pre-tinned making them super easy to solder. Also features two wires on the other Red Black wire jackets indicate polarity. They are fairly long too, 11" total, 9.5" of wire..
  • ★【Compatibility】- Easy DC Power solution, compatible with all CCTV systems and other 2.1*5.5mm DC power devices like part lighting or led strips. Very versatile. This 18AWG DC Power Pigtail provide a very good reliable DC power connection..
Check Stock

iGuerburn 2-Pack 24V DC Adapter for Resmed Airsense 10 Series, DC5521/DC5525 S10 CPAP Power Cord, DC Converter Work with Power Station Rockpals Progeny Medistrom

  • This 24V dc adapter only work for Resmed Airsense 10 series CPAP machine: Airsense 10 CPAP, Airsense 10 Elite, Airsense 10 AutoSet, Airsense 10 AutoSet for Her.Please don ’t use these resmed airsense 10 power cords with a 12v battery!.
  • The Resmed s10 dc to dc converter can work with 24v power station with dc5521/dc5525 output socket. Such as: Medistrom Pilot-24 Lite, PROGENY 300w,Talentcell PB120B1, Progeny 300w..
  • Our airsense 10 dc adapter is 3.3ft, it’s easy to carry and long enough outdoors when you are camping. This resmed airsense 10 dc converter also can be bent at will..
  • These resmed airsense 10 dc power cords only work with some 24v battery with dc5521 / dc5525 output socket..
  • The Package includes: 2 Airsense 10 dc cable (DC plug size: 5.5mm x 2.1mm) + 2 connector (5.5mm x 2.5mm), please check the size of your battery pack output port before purchasing in order to work your airsense 10 cpap machine well..
Check Stock

PERFEIDY 8V 2A 1A Charger AC Adapter 16W Max Switching Power Supply DC 8 Volt 2000mA 1500mA 1000mA 800mA 500mA Adaptor Regulated Transformer Plug Cord with 10 Interchangeable Jacks UL Listed

  • UL LISTED 8V 2A 1.5A 1A AC to DC Charger, Energy Efficiency VI, Regulated 8.0V Power Cord Tested & Approved and Certified by UL, Replacement Power adapter build in short circuit/Over current/Over voltage/Over temperature protection, Safe charging for your DC 8V 2A max input devices.
  • 8 Volt 2A 1A Switching Power Supply, DC 16W Max, Power supply works for various of devices which ask for a less than 8V 2A 16W power adaptor, Such as 8V 2000mA, 1900mA, 1800mA, 1600mA, 1500mA, 1400mA, 1300mA, 1200mA, 1100mA, 1000mA, 900mA, 800mA, 700mA, 650mA, 600mA, 500mA, 450mA, 400mA, 300mA, 200mA, 8V 2.0A, 1.9A, 1.8A, 1.7A, 1.6A, 1.5A, 1.4A, 1.3A, 1.2A, 1.1A, 1A, 0.9A, 0.8A, 0.7A, 0.6A, 0.5A, 0.4A, 0.3A, 0.2A transformer charger.
  • DC Polarity: Inner Positive(+), Outter Negative(-), Input AC 100-240V 50/60Hz, Worldwide input voltage range, US standand wall plug, 6.0FT extra long enough power cord, Charger can be work for most of your 8V DC input devices.
  • Interchangeable Multi Jacks - Selected 10pcs various connectors which can be used for most of your 8V 2A DC devices, DC Jack Dimensions: 6.3*3.0, 5.5*2.1, 5.5*2.5, 4.8*1.7, 4.0*1.7, 3.5*1.35, 3.0*1.1, 2.5*0.7, 6.0*4.4 with pin inside, 5.0*1.0 with pin inside, DIY connector, ⚠️Please DOUBLE CONFIRM the DC jack dimension....
Check Stock

DreamStation DC Power Cord - Genuine Philips Respironics

  • The 12v dc power adapter is for Philips Respiration DreamStation CPAP, DreamStation CPAP Pro, DreamStation CPAP Auto, DreamStation BiPAP Pro,....
  • The 6.5 ft dreamstation shielded dc power cord connects DreamStation CPAP & BiPAP series machine to any 12v solar or lithium battery source car....
  • This dreamstation 12v power adapter also works with Jackery/Bluetti/Rockpals power station dc outlet 12v..
  • Replacement for Respironics Philips dreamstation dc adapter model number 1120746/1120747. Dreamstation 2 dc power cord can charge your cpap fast. You....
  • Please Note: This dreamstation 12v power adapter only works with Philips Respironics DreamStation series machines, not compatible with DreamStation Go....
Check Stock