Best Dc Power Supply Tester

20/24 4/6/8 Pin Computer PC Power Supply Tester with LCD Display and Buzzer for ATX, ITX, BTX, PCI E, SATA, HDD

  • AUTOMATICALLY ALARM: When your power supply test value is beyond normal range, the Power Supply Tester would issue a buzzer alarm, Easy to Know..
  • WITH LED DISPLAY: We have developed a portable computer power tester for the power supply market that can judge the quality of the power supply. It has LCD display intuitive and accurate display voltage (+/ 0.01V), automatic fault alarm, complete test interface, small and beautiful appearance, and more test functions. It is your best choice and reliable helper to quickly detect PC power..
  • EASY TO USE: This power tester only needs to be connected to the power supply ATX connector to easily and intuitively know whether the output of each power supply is normal. It can detect ATX, BTX, ITX, TFX computer power supply, and can display various voltage and PG values in LCD screen to quickly detect the performance of computer power supply..
  • PRACTICAL & CONVENIENCE: Small and practical power tester. Now the number of power output groups is increasing. As long as one of them has problem, the hardware of the computer system may work abnormally or even burn out. To measure whether the output voltage output of the power supply is stable, the player usually uses a multimeter. But for the average user is still a little troub....
Check Stock

KNACRO Waterproof Monitor 3-Wires DC 0-600v 12v 24v 36v 72v 96v 120V 150V 240V 600V Volt Battery Meter Voltage Tester Automative Electric Cars Gauge Small Digital Voltmeter 0.52" Green LED Display

  • Installation size: 47.2x27.3mm x 22mm(depth).
  • Waterproof IPX8 tester is filled with waterproof glue inside, the battery voltage tester is waterproof grade IPX8,voltage meter will give you a real time voltage reading from your batteries. this multimeter can be used as battery voltage tester meter, battery capacity detector and temperature indicator panel for car, marine, RV, boat, etc.
Check Stock

UMLIFE 3pcs ACS712 Hall Effect Current Sensor Module 30A Range ACS712 Module + 3pcs Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor for Arduino Raspberry Pi

  • ❃❃ Package Included：3 x ACS712 Hall Effect Current Sensor Module + 3x Voltage Sensor Module DC0-25V Voltage Tester Terminal Sensor.
  • ❃❃A wide range of applications:The current sensor ACS712 provides economical and accurate solutions for ac or dc sensing in industrial, commercial and communication systems. Typical applications include motor control, load detection and management, switching power supply and overcurrent fault protection..
  • ❃❃ACS712 Hall Effect Current Sensor Module：Chip: ACS712ELC-30A.
  • Pin 5V power supply, on-board power indicator.
  • ❃❃Voltage Sensor Module：Voltage input range: DC0-25V.
  • input : Terminal cathode connected to VCC, GND negative pole.
  • Output interface: "+" then 5/3.3V, "-" then GND, "s" then the for AD pins..
  • ❃❃Perfect Combination：Using this product can measure both voltage and current, very suitable for DIY electronic design projects..
Check Stock

CMTOOL Power Circuit Probe Kit 9-30V Automotive Circuit Tester, Test Light Automotive Relay Tester Kit, Car Electrical Tester Digital Voltage Tester Continuity Tester Tool with 6m/20ft Extension Cable

  • 1.【10 Working Mode and Multiple Test Applications】【10 Working Mode】Smart Test, Multimeter Mode, Oscilloscope Mode, Relay Test, Component Activation, 0-5V Power Supply, Fuel Injector Test, Positive/Negative Test, Setting, Online Update.【Test Applications】Continuity Test, Signal Circuit Test, Activate Components in You Hand/Vehicle/W/Ground, Check for Bad Ground Contacts, Follow&Locate Short Circuits, Trailer Lights and Connection Test..
  • 2.【Power Circuit Probe Tester with Fast Intelligent Test】Automotive circuit tester can automatically identify the voltage value, resistance value, and positive and negative polarity of the detected circuit (red light is positive, green light is negative)..
  • 3.【Automotive Circuit Tester with Digital Multimeter Mode】Automotive circuit tester contains the common parameters of multimeters, and can quickly test the DC voltage, resistance, and diode in the circuit system, current, and frequency, bringing a lot of convenience to users..
  • 4.【Electrical Tester with Oscilloscope Function】Circuit probe tester with 6M extension test lead, can display the parameter curve diagram of the tested component, such as voltage, frequency, time, etc. Users also can observe the test results more directly by adjusting the d....
Check Stock

Computer PC Power Supply Tester 20/24 4/6/8 PIN for ATX, ITX, BTX, PCI-E, SATA, HDD, IDE with Aluminum Alloy Enclosure 1.8' LCD ATX Power Supply Tester

  • 【ATX Power Supply Tester】SAMFINTON computer power supply tester support 20-pin / 24-pin / HDD / Floppy 4-pin / PCI-e 6-pin / 4-pin / 8-pin / SATA connectors..
  • 【Aluminum Alloy Enclosure】Nice thermal conductivity & corrosion Resistance,with a high  strength housing. The computer power tester is more durable than the plastic case on the market..
  • 【Practical PC Power Tester】The 1.8inch LCD display intuitive and accurate display outputted Voltages (+/-0.01V), automatic fault alarm..
  • 【Normal】Turn on the power supply, will hear “DiDi” ring, If all groups of data are not flashing, the power supply output voltage is normal..
  • 【Faulty】If a certain voltage signal is not detected, or the detected voltage value exceeds the normal value, a long “beep” buzzer will be emitted.
  • if the corresponding voltage value or PG also flashes, it indicates a fault..
Check Stock

Volvox sp, Living

  • 【High Precision, Low Ripple, Big LED Display, Output Switch Control】NICE-POWER 120V 3A DC power supply is a professional power supply regulator with high accuracy of 0.01V and 0.001A, low ripple of DC power supply. The backlit 4-digits LED display has the advantage of high resolution, which can be easily viewed even if you are in low-light conditions . Adjust the required voltage and current through the output switch button without the actual output power, safer and more energy efficient..
  • 【CE & FCC Certification, Multiple Protection, Various Application】Lab power supplies have passed CE & FCC Certification. 120V DC power supply has multiple protections: overvoltage protection, overcurrent protection, overheating protection, over power protection, short circuit protection, leakage protection. DC power supply is suitable for LiFePO4 battery charging, arduino project, laboratories, schools, electronic maintenance , electrolysis, electroplating, lamp test, aging test, DIY, etc..
  • 【Front Power Switch , Stable Vertical Design, Lightweight and Portable】The front power switch is very convenient. Bench power supply adopts stable vertical design, DC power supply has shock absorber rubber feet at the bottom, so it will be safer and more stable during ....
Check Stock

TopDiag P200 Automotive Circuit Tester, Power Circuit Probe Kit, 9~30V with Multimeter/Relay/Fuel Injector Tester/Activating Component/0~5V Power with 20ft Cable for 12V 24V Vehicle

  • ...g engine shock. It is worth mentioning that TopDiag P200 auto circuit tester has been added 300+ USD valued powerful functions, namely: ✅Fuel Injector Test✅ Relay test mode. TopDiag makes diagnosing your car easier and saves maintenance costs..
  • 【0~5V Adjustable Power Supply & Activating Components】0~5V power is useful when checking the wiring to the ECU/ECM, also meet the voltage requirements for the sensitive parts with low voltage. Besides positive activation, negative activation is our newest function which others none, power on components at a moment notice..
  • 【Smart Test & Positive & Negative Test】When connected to the probe of Car Electrical Test Tool to measure voltage, resistance, positive/negative polarity, it will automatically become an instant auto-range, intelligent judgment does not require manual selection, and the corresponding parameter values and prompts are displayed on the HD LCD screen. With a 20ft cable, you can quickly assist you in diagnosing the car's condition without opening the wiring..
  • 【Multimeter & Oscilloscope Tester】The P200 Circuit tester will be the more ....
Check Stock

Rsrteng HD-3100 CCTV Tester HD Coaxial Camera Tester 5 inch TFT-LCD Screen Camera monitor 4in1 Support 4K 8MP 3840x2160 TVI/CVI/AHD/CVBS Camera test Support RS485 Audio HDMI VGA,12V output PTZ control

  • ...0P 12.5/15FPS. ●NOTE:THIS TESTER DOESN’T SUPPORT IP NETWORK CAMERA TESTER.
  • 5 inch TFT-LCD screen, 800*480 resolution.
  • ●Audio in, support record and save the audio ●LED lamp ●VGA input, up to 1920 x 1200 60fps ●HDMI Input, up to 4K 30fps, support snapshot, video record & playback ●DC12V/1A power output, supply temporarily power for the camera ●5V 1A power output, support reading USB disk.
  • Auto HD app, auto recognize HD coax camera type and resolution, support video record & playback ●Coaxial PTZ (UTC control) & call OSD menu ●Support RS485.
  • Improvement cable tester, UTP cable, telephone cable etc order and connectivity test, can save testing report, if special number, need customized. Can detect the near-end, mid-end and far-end fault point of the RJ45 cable plug ●Media player, 4K video files and MKV/MP4 media files play ●1 channel audio signal input, test whether sound normal.
  • 3.7 V /5200mAh rechargeable battery, after 4 hours charging, working time lasts 6.5 hours.
  • ●Working Temperature: -10~50C, Humidity 30%-90%.003cbr003eDimension/Weight: 184x110x41mm(7.24x4.33x1.61inch)/0.4kg(0.88lbs).
Check Stock

ANCEL BST200 12V Car Battery Load Tester with ANCEL PB100 Automotive 12/24V Circuit Tester Probe

  • Includes: 1 x BST200 Battery Tester, 1x PB100 Circuit Tester.
  • Works on automotive 12V 100 - 1100 CCA lead-acid batteries, including regular flooded, AGM flat plate, AGM spiral, and GEL batteries for cars, SUV, motorcycle, light truck, and more..
  • Gives you an accurate result in only 3 seconds, such as CCA value, CCA rating, voltage, internal resistance, state of health, and state of charge, based on the rating standard of CCA, CA, MCA, JIS, DIN, IEC, EN and SAE..
  • A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
  • 4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
  • AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
  • Resistance mode for reading the resistance between the tip and auxiliary ground lead.
  • Diode mode for checking forward bias or reverse bias..
Check Stock