Best Current Magnetic

20x Reed Switch Normally Open Magnetic Induction Switch Plastic Anti-Interference 100V for Treadmill and Breaker 2.5X14mm

  • Normally open magnetic induction switch. When the magnet is near, the reed closed and the released signal.
  • When the magnet leaves, the reed opens and the disconnect signal..
  • Reed switch pipe can be used as a sensor, counter, limit, and door magnetic, magnetic window in the security system..
  • Maximum switching voltage 100VDC,Working temperature: -20 degrees to 80 degrees..
Check Stock

NOYITO ACS758LCB-050B-PFF-T Linear Current Sensor Hall Current Module

  • This product is a current detection module, mainly using the ACS758-LCB current sensor. The ACS758 consists of a precision, low-offset linear Hall sensor circuit with a copper current path close to the wafer. The current applied through the copper current path is capable of generating a magnetic field that can be induced by the integrated Hall IC and converted to a proportional voltage.003cbr003e.
  • Device accuracy is optimized by placing the magnetic signal close to the Hall sensor. The accurate, proportional output voltage is provided by a stable chopper-type, low-bias BiCMOS Hall IC that is factory-precisely programmed.003cbr003e.
  • The internal resistance of this conduction path is typically 100 μΩ with low power loss. The thickness of the copper wire allows the device to operate under high overcurrent conditions. The terminals of the conduction path are electrically isolated from the sensor pins (pins 1 to 3). In this way, the ACS758 sensor IC family can be used in applications that require electrical insulation without the use of opto-insulators or other expensive insulation techniques.003cbr003e.
  • Perform RC filtering on the output and use the op amp to build a voltage follower circuit to make the output more stable and better match the impedance of....
Check Stock

P.Y.P PROTECT YOU PLAY 2 Count Comic Book Frame Display Case - Magnetic Holder UV Protection Comic Book Slab Protector

  • 【Protect Your Valuable Comic Book】 - The Magnetic Comic Book Holder Specially Designed For Holding and Displaying Current Size Comic Book , Prevent from Scratch Dusty, Keep Your Valuable Current Comic Book in Mint Condition.
  • 【Magnetic Closure+ Slide in】- The Magnetic Closure Make It Much Easier to Open Than Screw One, and Slide in Structure Makes The Card Safe Not Open Easily..
  • 【High Transparency+ Diamond Corner+ Recessed slot】- It Is Made of Transparency Material to Display The Comic Book better, The Diamond Corners and Recessed Slot to Better Protect The Card Avoiding Damaging.
  • 【 Wall-Mounted 】- It with Hanging Hole for Wall Mounted..
  • 【2 Counts Package】- 2 Piece per Package.
Check Stock

Fluke 715 Volt/mA Loop Calibrator

  • Measure Loop Current (0-20 Ma, 4-20 Ma) Signals With Very High Accuracy Of 0. 015% And 1 Ma Resolution.
  • Measure Voltage Output Process Signals From Places, Transmitters.
  • 24V Loop Supply With Simultaneous Current Measurement.
  • Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution.
  • Compatible with toolpack magnetic hanging system.
Check Stock

Current Sensing Switch, SZC03-NC-AL-CH Normally Open Amp Sensor Monitoring Relay, AC 0.2-30A

  • Current sensing relay for monitoring electrical current.
  • Current carrying wire is routed through an aperture.
  • Magnetic modulator technology for a stable and repeatable current trip.
  • Internal transformer for scaling the current and a voltage reference circuit for a repeatable trip point.
  • UL Recognized for safety, CSA certified for quality assurance, and RoHS compliant for hazardous substances.
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

elago W2 Charger Stand Compatible with Apple Watch Series 7/6/SE/5/4/3/2/1 (45mm, 44mm, 42mm, 41mm, 40mm, 38mm), Nightstand Mode (Black)

  • 【Integrated Magnetic Technology】Built with magnetic pure copper probe, easily dock your Smart Watch with shock absorption and high temperature resistance. Durable High-quality ABS + PVC Material and Copper Wire ensures Stable Current to offer you safe charging protection and experience.
  • 【High Speed Magnetic Charging】The USB charger cable comes with solid magnetic power. It is easily align the charging area with your smartwatch, can fast automatically adsorb the watch to charge. Ensures 2 hours fully charging efficiency and speed. Note: Please charge your smartwatch before the battery runs out.
  • 【Advance Safety】Dirrelo smartwatch charging cord is built with over-current, over-voltage, short-circuit and over-temperature protection, and other safety features to offer you safe charging protection. You can connect with the USB power adapter, car adapter, power bank, laptop and so on.
  • 【Ultralight and Portable】Watch magnetic charger ​cable with lightweight and portable design to carry around conveniently, especially for work, home, travels. Put it in your bag and keep your watch always on. One year Reliable & Friendly Service for any quality issues.
  • 【Widely Compatible】Compatible with Dirrelo GT01, ID206, ID206mini, ID207 Smart Watch and TOZ....
Check Stock

Current Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • The measured current of this current transmitter is AC 0-10A/20A/50A.
  • The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
  • With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
  • through‑core structure design, isolation withstand voltage up to 2000VAC.
  • hysteresis less than 1%, can be used under strong magnetic field conditions..
  • The shell is made of self-extinguishing material ABS.
  • it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check Stock

Magnetic Phone Charger Cigarette Lighter-[Upgraded Clip] Portable Car Wireless Cigarette Lighter Charger Fast Charge Magnetic Phone Stand Bracket Universal Dashboard car Mount

  • ⭐ UNIVERSAL COMPATIBILITY : Magnetic Phone Holder suitable for most vehicles, it combination of wireless charger, mobile phone holder and USB charging interface..
  • ⭐RELIABLE and DURABLE: This unique product is made with the best innovative materials - a high-quality flexible ABS for the perfect four-clamp grip, strong metal frame built to last, and a quality flat silicon surface for page and strong hold, this all-in-one product will keep your phone healthy from a bumpy road. The rubberized exterior increase grip power and protect air vent from scratching..
  • ⭐QUALITY ASSURED:Magnetic Phone Stand with over current, over voltage, high temperature, short circuit and over charge protection. The wireless charger can be rotated 180 degrees, you can adjust it to the proper angle and tighten the knob..
  • ⭐ATTENTION: Easy to install, you can easily clip this magnetic car bracket to the cigarette lighter socket and it's easy to install with a simple snap..
  • ⭐SUPER STRONG : Cigarette Lighter Charger is mini size, but the magnetic car mount comes with extremely strong Magnet, providing strong magnet suction power. It can hold big phones steadily. Meanwhile, the closed magnetic field would not affect the phone signal. Totally free your hands and keep healthy wh....
Check Stock