Best Coriolis Gas Mass Flow Meter

LZQ-7 Flowmeter 2-20LPM Acrylic Air Gas Flowmeter with Control Valve for Measuring Controlling Gas Flow

  • This gas meter is connected to hose to measure unidirectional gas flow.
  • Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, , compressed air, argon.
  • Mainly used for detecting the flow, control flow and can be used in industry.
Check Stock

Gas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas

  • INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
  • MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
  • IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
  • MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
  • MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.
Check Stock

Argon Co2 Professional Gas Flow Meter Tester Flowmeter peashooter for Mig Tig Welder Welding

  • Professional Ggs Flow Tester / Meter Peashooter Style.
  • Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
  • Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
  • Designed to check gas flow on Tig or Mig torches..
Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

  • CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
  • PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
  • RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
  • APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
  • PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..
Check Stock

Dual Output Argon/CO2 Gas Regulator Flow Meter for TIG MIG Welding 10-60 SFCH 0-4500 PSI CGA 580 Inlet Connection 5/8 x 18 RH Outlet Fitting

  • 【CGA-580 Bottle Inlet Connection】The CGA-580 Bottle Connection fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from any....
  • 【Outlet Connection】The welding gas regulator applicable for female 9/16" x 18 nut or male 5/8" x 18 fitting, equipped with 1/4" Hose barbed....
  • 【Precise &Fast】0-4500 PSI. The high pressure gauge allows you to view how much gas is left in the argon cylinder.The CO2 flow meter is adjustable....
  • 【Premium Quality】The argon gas flow meter is made of high-quality brass, and strict tested to guarantee long life. It can greatly prevent gas....
  • 【Perfect for MIG and TIG Welding 】The Argon CO2 welding regulator compatible with kinds of gases, it will be an economic alternative for demanding....
Check Stock

JDMON Compatible with Mass Air Flow Sensor Meter MAF Nissan Ford Infiniti Mercury Frontier/Pathfinder/Quest/Xterra 3.3L V6 1999-2004, Mustang 3.8L V6 2001-2004,QX4 1998-2000,Replaces 22680-5J000

  • Fitment:Mass Air Flow Sensors Compatible with Nissan Frontier 3.3L V6 1999-2004/Compatible with Pathfinder 1998-2000/Compatible with Quest 1999-2002/Compatible with Xterra 2000-2004 ,Compatible with Ford Mustang 3.8L V6 2001-2004 ,Compatible with Infiniti QX4 1998-2000,Compatible with Mercury Villager 1999-2002.
  • Replace Part Numbers: 22680-5J000,22680-5J000,226807B000,226807B001, AFH70-16, AFH7016,79021081, 228375, 5S2718,SU5066, AUS31-4068,74-50014.
  • A Mass Air Flow Sensor (MAF) determines the mass of air entering a vehicle's fuel injection engine, and passes that data to the engine control unit, or ECU. The unit can correctly tell the fuel injectors how much fuel to inject into the engine cylinders. This balances the air and fuel ratio to promote successful combustion..
  • JDMON Mass Air Flow Sensor Meter:Direct replacement for a proper fit and easy installation, meets or exceeds OEM standards.Please confirm the compatibility before purchasing..
  • Warranty: One year warranty-hassle free service and technical support. If you have any questions, please feel free to contact us, we will reply you within 24 hours..
Check Stock

STYDDI 3 Feet Low Pressure Propane Regulator and Hose with Propane Tank Gauge, Universal QCC1 Replacement Hose with Regulator for Most LP Gas Grill, Heater and Fire Pit Table, 3/8 Female Flare Nut

  • NO NEED TO BUY EXTRA GAS METER & SAVING YOUR MONEY. This upgraded 3 FT braided low-pressure propane hose and regulator assembly is equipped with tank gauge level indicator, allows you to monitor the fuel level without necessarily removing the tank. The color-coded dial lets you see when your propane gas level is low at a glance without spending more money on extra gas meter..
  • CSA CERTIFICATED & BUILT-IN EXCESS FLOW PROTECTION FOR YOUR SAFETY. CSA certificated ensures secure, airtight connection between grill and tank. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shut off the gas flow automatically..
  • EASILY INSTALL WITHOUT A HITCH! Please DOUBLE CHECK your appliance connection is 3/8" MALE FLARE FITTING CONNECTOR. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place. Then connect the regulator hose end connect to your 3/8" male flare connector propane appliance. Its compatible with your 20-50 lb propane gas tank..
  • UNIVERSAL FOR MOST LOW-PRESSURE GAS PROPANE APPLIANCE. QCC1/QCC/Type 1 hose and regulator replacement for Weber Genesis 300-series, Genesis Silver C, Genesis Gold, Genesis Platinum, Spirit E....
Check Stock

Mass Air Flow Sensor Meter MAF 22680-7S000 AF10141 Compatible for Nissan Altima Infiniti G37 Suzuki, 07-13 Sentra, 05-15 Xterra, 03-09 350Z 3.5L, 09-15 370Z 3.7L, 03-15 Murano 3.5L, 05-08 G35 3.5L

  • Replacement MAF Sensor Compatible for 2007 2008 2009 2010 2011 2012 2013 Nissan Altima & 2005-2013 Armada & 2005-2013 Frontier & 2009-2013 Cube & 2004-2013 Maxima & 2006-2012 Pathfinder | Infiniti 2009-2012 FX35/FX50 & 2004-2013 QX56 & 2006-2010 M35 | 2009-2012 Suzuki Equator & MORE【NOTE】Before purchase this MAF Meter, please use the year/make/model drop down bar confirm the compatibility or description to confirm the compatibility.
  • Replace Part Number: 22680-7S000, MF21058N, 336-60644, 226807S00A, 22680-CA000, 74-500036, 86-50036, AF10141, AFH70M-38, AFH70M38, 33660644, 226807S000, 22680CA000, 74500036, 8650036.
  • Fast Response Time: 15 ms. Please clean out the air box and replace the air filter before installating this Mass Air Flow Sensor Meter, or the Code and Check Engine Light may keep showing even if you replace a new MAF.
  • Mass Air Flow Meter MAF Sensor measures the volume and density of air entering the engine, providing highly accurate airflow readings to the ECU over a wide range of ambient temperatures.
  • Warranty: If you meet any problem, Any defective, any dissatisfied, Please directly contact our customer Service. We provide "No reason to refund" Service.
Check Stock

X AUTOHAUX Mass Air Flow Meter Sensor for Chevrolet Cruze 2011-2019 for Buick Encore 2013-2021 12671624 0280218419 MAS0321

  • OE Number: 12671624, 0280218419, MAS0321. Before purchasing this MAF Meter, please confirm the compatibility..
  • Fitment: for Chevrolet Cruze 2011-2019, for Chevrolet Cruze Limited 2016, for Buick Encore 2013-2021, for Chevrolet Sonic 2012-2020, for Chevrolet Trax 2015-2021, for Buick Verano 2012-2017.
  • Function: MAF is a sensor used to determine the mass flow of air entering a fuel-injected internal combustion engine. Before installing the MAF, sure to replace the air filter..
  • Installation: Direct replacement for a proper fit and easy installation, The MAF Sensor can easily be located beside the air intake box inside the engine bay. quality plastic and metal used, it works even better and lasts longer..
  • Replacement mass air flow sensor - Also known as the MAF Sensor allows the vehicle to detect the mass of airflow entering the engine necessary for proper fuel mixture. Over time the factory MAF sensor can fail or accumulate dirt and oil causing the vehicle into some running issues or light up a CEL (Check Engine Light)..
Check Stock