Best Cooler Connector

Cooler Master 1-to-5 ARGB Splitter Cable / 5V - Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support(ARGB 1-to-5 Splitter)

  • Cooler Master 1-to-5 ARGB Splitter Cable,NOT support 12V RGB, Only support 5V RGB.
  • Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support.
  • 3-pin ARGB Header compatibility,2ft/60cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free..
  • NOTE: 1. (DO NOT connect an Addressable RGB(ARGB/Digital RGB +5V) Fan to a Non-Addressable RGB(Standard +12V) motherboard header or RGB controller. 2. Beyond the look, Cooler Master provides quality. With high quality material, keep your build reliable and flawless. Certified Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB..
  • Splitter: - Connection Type: Straight Through Wiring (Passive Wiring) - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male.
Check Stock

COMeap 5 Pin to 3X 15 Pin SATA Hard Drive HDD Power Adapter Cable Only for Cooler Master Modular Power Supply 20-in(50cm)

  • 『5P - 15P SATA』5 pin port to plug into CoolerMaster PSU, 15 Pin SATA port to plug into hard drive, riser card or other devices with SATA port.
  • 『Connector』Connector A: 5 pin male ( Only compatible with Cooler Master PSUs with single 5 pin port as listed ), Connector B: 3x SATA 15 pin female.
  • 『Compatibility』Only compatible with Cooler Master PSUs with single 5 pin port such as: V550 V650 V750 V850 V700 V1000 V1200 Semi modular M520/M620 ,etc.,Corsair semi-modular HX520W/HX620W/HX650W.
  • 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): main 20inches(50cm)+secondary 6inches(15cm)+thridary 6inches(15cm) ,Between 2 SATA: 6 inches(15cm), Quantity: 1pcs, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for some types of Cooler Master PSUs listed in the 3rd point, not compatible with other brand PSUs or types. If you use other incompatible brand PSUs or types, it will definitely burn or damage the hard drive and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types and contact us if you are not sure if it supports your power supply.
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

Mountain Water Cooler Spigot for Rubbermaid Gott Cooler Valve,Push-Button Style,3 Pieces

  • 45 degree water cooler connector for Rubbermaid and Gott radiators.
  • The actual thread size is 1 1/2" x 3/4" and the total length is 3 1/4".
  • Kit includes threaded washer with threaded joint 2 rubber gasket plastic washer plastic nut.
  • Very suitable for replacing the damaged plug on the cooler, making your water cooler look like new..
  • Lightweight, easy to install, ready to use.
Check Stock

Pccooler 120mm Fan Moonlight Series 5 in 1 Kit Upgrade,PC-5M120 ARGB LED Computer Case Fan - PWM Cooling Fan - Dual Light Loop Quiet Fan/Multiple Light Modes with Wireless Controller for PC Case

  • 【Intelligent Speed Control】5 pcs 120mm full function PWM fans. The intelligent temperature controls the speed at 1000~1800±10% RPM, so the fan speed can be controlled and keep the fans quiet. Please connect the fan 4Pin PWM connector with 1-to-5 strip cable’s female port, do not connect it with motherboard. There’s switch fan speed control by motherboard’s PWM signal. These fans are 4pin 5v ARGB connector that connect with RGB control box one by one..
  • 【Dual Light Loop Design – Controlled by RGB Remote Controller】Addressable RGB LEDs can be controlled by RGB remote controller – 12 lighting modes, 8 different colors and multiple RGB light speeds, provide colorful streamer lighting effects. Double-sided ring ARGB glare effect design, creating a practical and beautiful cooling system. You also can turn on / off the fan light effect and switch fan hub’s RGB signal to motherboard 5V ARGB / 12V RGB port by remote..
  • 【Shockproof Design】The fan frame is fixed on both sides with 8 pieces of shock absorbing rubber pads. The rubber soft material which is not easy to peel off has good shock absorbing effect, which can make the internal operation of the computer case stably and reduce the noise output between the fan and the com....
Check Stock

Bitspower D5 Vario Pump with D5 Top and Cooler

  • D5 Vario Pump with D5 pump top and cooler.
  • POM top And aluminum Cooler Material for excellent heat dissipation.
Check Stock

AIEVE Drain Plug Hose Connection for YETI Cooler, Cooler Drain Plug Replacement for YETI, Cooler Plug Replacement for YETI Chest, Cooler Accessories for YETI Tundra Cooler, Roadie Cooler, Tank Cooler

  • ...ion for easy draining, no long need to pull cooler out your truck to drain water, effective and ice melts eventually.
  • Cooler plug replacement for yeti cooler fit most standard hoses to drain the cooler water easily while drain plug is partially open, garden hose drain plug connector for coolers, connect a standard garden hose, and drain all the way down at the end of the driveway, instead of pooling a big old puddle of cold water into your garage.
  • Tighten the replacement cooler plug and keep your YETI Tundra coolers cold, when not in use, simply attach the provided cap as a leak-proof plug and drain your YETI coolers easily without lifting a finger, no need to drag the ice chest to the end of the tailgate to drain and the water goes straight to the ground and not in the bed of the truck.
  • Cooler drain plug kit include 1 drain plug hose connection for YETI Tundra, cooler accessories drain plugs compatible with YETI Tundra coolers, Roadie coolers and Tank coolers.
Check Stock

Antrader 3-Pack 60mm x 60mm x 15mm 6015 12V Brushless DC Cooling Fan 2pin for DIY 3D Printer Extruder Humidifier

  • 3 Pack high quality brushless 6015 DC 12V fan, sleeve-bearing design cooling cooler..
  • Plastic construction 9 blade fan. Dual Ball Bearing.
  • DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.1A.
  • 40 x 40 x 10mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.560 x 60 x 15mm Fans. Connector: 2 Terminal Connector with 2pin-ph2.5.
  • Compact motor design for computer case 60mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series.
  • small heat radiating communication equipment.
  • intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling.
Check Stock

Cooler Master i30 CPU Cooler - 92mm Low Noise Cooling Fan & Heatsink (RH-I30-26FK-R1)- for Intel Socket LGA 1150 / 1151 / 1155 / 1156 (i30)

  • Cooler Master I30 MINI CPU Cooler 92mm Quiet Fan For Intel 1150 1151 1155 1156 Computer Case CPU Radiator 3pin 9.2cm Cooling Fan.
  • Model: RH-I30-26FK-R1 ,Noise Level: 22dBA±3 Fan Speed : 2200 RPM±10%.
  • Heatsink: 90 x 30mm Fan Size: 95 x 25mm Bearing Type : Alloy bearing Rated Voltage : DC 12V.
  • Noise Level: 22dBA±3 Fan Speed : 2200 RPM±10% Power Connector: 3-pin Theremal compound: Prepaste.
  • Package included: 1 x CPU Cooler Unit 1 x Backplate 1 x English User Manual.
Check Stock