Best Compressed Air Flow Meter

1/2 NPT Mid Flow Compressed Air In Line Filter Desiccant Dryer Moisture Water Separator

  • PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" Mid Duty In Line Dessiccant Air Dryer With Poly Bowl and Visible Sight Glass..
  • 105 CFM Flow Rate 1/2" Female NPT Air Inlet port X 1/2" Female NPT Air Outlet port.
  • Designed to Dry the Compressed Air From Your Compressed Air Line, For the Best Results, Unis in Congruence With A Water Removing Filter.
  • 7 - 150 PSI Max Output Pressure 215 PSI Max Input pressure.
  • Equipped with 5oz Poly Bowl Temperature ratings between 41F thru 140F (60°C) and 2 Desiccant Bags Included.
Check Stock

3/4 Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo

  • 3/4" Compressed Air Moisture Filter Regulator Oiler Separator Lubricator Combo.
  • Brand new in line compressed air moisture filter, regulator, lubricator combo. This is a high quality unit that gives you the power to keep moisture out of your air lines, regulate air pressure, and lubricate your air lines all at once!.
  • This has 3/4" female NPT input as well as a 3/4" female NPT output port. This assembly has a 140 CFM max flow rate and comes equipped with a pressure gauge..
  • You can adjust the regulated pressure between 7 - 160 PSI with a 225PSI max PSI. The moisture filter features a 5 micron filter, 2.7 oz bowl capacity, as well as a visual sight glass to easily monitor the moisture level..
Check Stock

ANNMETER Pro HVAC Anemometer- Air Flow Velocity Meter AN-826A 0.001~100Mph Wind Speed Gauge,Handheld Wind Tester Measuring Airflow Movement Temp with Max AVG Current

  • 【CFM Anemometer】Built with lightweight vane sensor to ensure sensitivity for accurate air flow measurement, Extendable cable and wand can extend to 79 inches, makes this cfm wind speed meter tester can easily reach to air outlet of AC, Vent..
  • 【Pro Airflow Air Velocity Meter】-Accurately measure wind speed ranging from 0.001~100Mph (+/- 5% of reading), wind temperature from 14~113℉(+/- 1.8℉). 5 wind speed units optional: m/s, Ft/min, Knots, Km/hr, Mph.
  • 【Wide Applications Wind Detector】-Handheld wind indicator not only can be applied in HVAC system installation and checking, dust vent detection, air conditioner maintenance, but also for outdoor activities: hiking, camping, boat sailing, sky surfing, shooting, drone Flying..
  • 【Humanize Designed Anemometer】-For continuous measurement, you can fix the gauge on a tripod with the thread hole at the bottom. Auto/ Manual power off function for battery saving. Backlight LCD provides clear reading in darkness or dim place..
  • 【Must Have One Air Flow Meter】-A solid storage case comes with AN-826A, for easy carrying and protecting damage from transport. Buy with confidence! For product defective or any further problem, ANNMETER provides you unconditional warranty!.
Check Stock

SirMo Vortex Tube Air Conditioner Waistcoat Compressed Air Cooling Vest Welding Steel

  • Gas flow rates up to 35 SCFM (990 SLPM)..
  • No moving parts, portable, lightweight, inexpensive..
  • No danger of sparks flash, no wireless / radio frequency interference..
  • Reliable, maintenance-free, durable nylon construction. * Enter the amount of compressed air 10, 15, 25, and 35 SCFM (280, 420, 700, 990 SLPM).
  • can produce up to 2500 Btu / H (630 Kcal / H) cooling capacity..
  • Only manual knobs and adjust the air outlet temperature thermometer. If the compressed air inlet pressure and temperature remain constant, the outlet temperature of the vortex tube will be kept within the range of ± 1 F (± 0.6 degC) for sustained..
Check Stock

Extech AN100 CFM/CMM Mini Thermo-Anemometer

  • Large display of airflow or air velocity.
  • Simultaneous display of air flow or air velocity plus ambient temperature.
  • Easy to set area dimensions (cm2) are stored in the meter's internal memory for the next power on.
  • 3 percent velocity accuracy via low friction 2.83 Inch D (72mm) ball bearing vane wheel on 3.9 Feet (120cm) cable.
Check Stock

Maddog 48/3000 Aluminum Compressed Air HPA Paintball Tank with Regulator - Fresh Hydro Date - Single

  • BUILT FOR PAINTBALL! Maddog 5 Year 48ci 3000psi Compressed Air HPA Paintball Tank is Perfect for your Paintball Marker! Enhanced accuracy, more consistent velocity, and higher performance in all weather conditions over CO2! All Compressed Air HPA Paintball Tanks are Shipped EMPTY and must be filled prior to use..
  • High Quality 48ci 3000psi Aluminum 5 Year HPA Tank | DOT / TC certified.
  • Industry-Standard 3000psi regulator has excellent flow, efficiency, and a stable pressure output | 11" Length x 3.75" Width | Tank Weight when Empty: 1.9 lbs.
  • Fresh Manufactured Date Guaranteed - 5 Year Re-Test Cycle - The date stamped on these tanks is the date the tank was manufactured, NOT an expiration date. Tanks are good for 5 years after the stamped date until they will need to be re-hydrotested..
  • All Compressed Air HPA tanks are shipped EMPTY to comply with Department of Transportation laws. Tanks Must Be Filled Prior to Use. | Designed w/ Safety as a top Priority!.
Check Stock

Avivos 48ci/3000psi Compressed Air HPA Paintball Tank, Paintball Gun co2 Tank, Hpa Air Soft Adjustable Regulator and Fill Nipple Protector Combo Paintball

  • 48ci 3000psi Compressed Air HPA Paintball Tank is Perfect for your Paintball Marker! Enhanced accuracy, more consistent velocity, and higher performance in all weather conditions over CO2! All Compressed Air HPA Paintball Tanks are Shipped EMPTY and must be filled prior to use..
  • All Compressed Air HPA tanks are shipped EMPTY to comply with Department of Transportation laws. Tanks Must Be Filled Prior to Use. | Designed w/ Safety as a top Priority!.
  • High Quality 48ci 3000psi Aluminum 5 Year HPA Tank | DOT / TC certified.
  • Industry-Standard 3000psi regulator has excellent flow, efficiency, and a stable pressure output.
  • 5 year hydro, Gives you 1200 shots per fill depending on marker.
Check Stock

Automotive Smoke Machine Leak Detector VXSCAN EVAP Vacuum Leakage Tester Fuel Pipe Diagnostic Tester with Flow Meter & Pressure Gauge for All 12V Vehicles

  • 【EVAP SMOKE MACHINE】VXSCAN V3 is a professional vacuum machine for car fuel pipe system leak detection. Supports EVAP system test, tightness test,....
  • 【EASY TO USE】By heating USP mineral oil or baby oil, the automotive smoke machine can be outputs lots of smoke within 30 seconds, to improve....
  • 【SMOKE FLOW METER & PRESSURE GAUGE】Equipped with pressure gauge and adjustable flow meter which helps you control the smoke effect easily. When....
  • 【Air Mode & Smoke Mode】The V3 smoke leak tester adopts an independent switch control design, the air mode independently controls the built-in air....
  • 【WIDELY COMPATIBILITY】Our package includes all accessories (Oil not included), it supports detect the leaks of multi pipe systems on cars,....
Check Stock

ABN Engine Cleaning Gun with 4ft Siphon Hose, Siphon Spray Gun Cleaning Kit – Car Engine Cleaner Degreaser Tool

  • DURABLE ENGINE CLEANING GUN: The ABN Engine Degreaser Sprayer High Pressure Cleaning Gun with 4-foot Air Siphon Hose is a high-speed 2-way action syphon spray gun that blasts dirt, grease, and oil quickly from engines and machinery.
  • The compressed air sprayer hose gun features a pressure trigger for maximum efficiency and a long reach nozzle to reach those tight awkward spaces in your engine bay, deck, and wheels.
  • 4-FOOT SIPHON HOSE: Included in this kit is a durable 4-foot tube with a 1/4 inch (6.4 mm) inner diameter that is incredibly easy to attach and maneuver.
  • Simply attach the 4-foot oil siphon hose to your solvent sprayer and dip the other end of the hose into the oils, solvents, cleaners, or insecticides you plan to use.
  • The powerful syphon spray gun operates with a 1-HP or larger air compressor to deliver 3.0 CFM at 90 PSI giving you a great control rate of flow for your project.
  • SPECIFICATIONS: Includes an aluminum air pressure gun, a long reach cleaning nozzle, and 4 feet of siphon tubing with a built-in solution strainer.
  • Attached to the handle is a pressure trigger, a 1/4-inch (6.4 mm) air inlet that attaches to the supplied siphon hose, and a 1/2-inch (12.7 mm) inlet to attach an air compressor.
  • The oil spray gun operates with 1-HP or lar....
Check Stock