Best Cnc Milling Machine Tools

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....

Solid Carbide Ball Nose CNC Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
Round Top with 4-Flute, Material: Solid Carbide with TiAlN Coated.
For CNC, Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..

Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
Uses the two unused comers of APKT 1604 carbide inserts..
Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..

☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..

5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..

Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
Uses the two unused comers of APKT 1604 carbide inserts..
Cutter Diameter: 2-1/2 inch, Number of Inserts: 4, Cutter Dia.: 2.5.

Scope of application: This milling chuck holder is used for CNC machining center.
This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
As milling machine accessories, convenient to replace the broken one.

As milling machine accessories, convenient to replace the broken one.
Scope of application: This milling chuck holder is used for CNC machining center.
This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.