Best Cable Clamp Set

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

Wingsmoto 7/8" 22mm Dirtbike Twist Throttle Accelerator Handle Grip + Cable + Throttle Clamp 50 90 110 125cc Pit Bike Dirtbike (Handle Grip + Cable + Throttle Clamp)

  • This handlebar replacement set includes throttle cable, throttle clamp and hand grips,throttle clamp is made of aluminium alloy,smooth surface, with 2 pcs of stainless steel screws..
  • Cable Total Length(inner wire cable end to end): 33.85 " (860mm), Housing Length: 29.3" (745mm),Cable Moving Length: 4.13 " (105mm),Please look at the 2nd picture for check the detail measurements..
  • Fits for 7/8" ( 22mm) bar dirt bike, compatible with most of 50cc, 90cc, 110cc 125cc & 140cc 4-stroke dirt bike, mini bike, pocket bike.
  • Please check the measurement of throttle cable before orders. we ensure the quality parts..
  • Dealers please contact with us for bulk order..
Check Stock

ABN Hose Clamp Plier 9-Piece Set – Universal Automotive Fuel Hose, Oil Hose, Water Hose Removal Pliers Remover Tool Kit

  • Tools in the plyer kit squeeze together taking pressure off hose.
  • Tools can hold the locking tab of connector in an open position leaving your hands free to work elsewhere.
  • [Built to Last]: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • [Comfortable Grip]: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • [Portable Storage]: Heavy-duty 18.6 x 3.5 x 10.9 inch (47.2 x 8.9 x 27.7cm) plastic blow-molded case with handle for easy transportation, safe storage, and quick organization.
  • [Package Contents]: Includes a single hose clamp pliers, swivel jaw band clip pliers, swivel jaw spring wire clip pliers, flat band hose clamp pliers, angled flat band hose clamp pliers, hose removal pliers, circle-R (clic-R) collar pliers, screwdriver, and hose remover dismount hook..
Check Stock

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

  • ...th long line design】This flexible hose clamp pliers is a 24 inch pliers, designed with 24in flexible wire rope, allowing you to operate flat hose clamps in areas that are usually hard to touch, the flexible hose can be bent to any position, it is An easy-to-operate long-distance remote pliers, remote hose pliers, cable hose clamp pliers.
  • 【Flex pliers with locking function】This flexible pliers, has a ratchet locking mechanism, this locking mechanism keeps the engine hose pliers in the open size position, and holds the cable hose clamp pliers in place, this radiator clamp remover is one-handed Can be operated.
  • is a cooler clamp pliers, radiator hose spring clamp pliers that help you to remove and install easily.
  • 【Widely used long reach clamp pliers】This flexible hose clamp tool can loosen hose clamps on cars, remove factory spring hose clamps, factory GM clamps, machine coolant or radiator hoses.
  • let this flexible hose clamp clamp plyers, can be your radiator hose clamp removal tool, cable clamp plier, heater hose clamp pliers, brake hose clamp pliers, remote hose clamp pliers.
  • 【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.
Check Stock

mykit Ethernet Cable Toner Tracer Tone Generator Receiver Probe Wand, Basic Butt Set Telephone Test Set, Carry Pouch, for Toning Tracing Voice/Data Lines, Troubleshoot Phone Wiring/Ethernet Cabling

  • Network cable toner and probe provides clear and precise tracing of communication cabling, tests RJ11and RJ45 terminated cables for mis-wires, open and short faults, locates cables safely and effectively at patch panels, switches, termination blocks or hidden within bundles.
  • Ethernet cable/phone line toner and tester provides you tone and trace Cat5 Cat5e Cat6 cable or telephone line effectively, RJ11 RJ45 cable sequence collation, continuity test, DC positive negative polarity detection.
  • Basic butt set is great for the occasional testing the phone lines of alarm systems, fax lines, elevator or other emergency lines, test tone on faxes and panels as needed, or used as a temporary communication handset (no speakerphone).
  • Basic telephone test set comes with alligator clamp and a 66 block tip as well as a coupler, so it can offers three ways to connect to the line. The small telephone has the functions including FSK/DTMF dual system caller ID (only the number), dial tone, dial out, on off hang up, redial the last number.
  • What's in the Box: cable toner and probe, RJ11 line, RJ45 c....
Check Stock

ATPEAM 9pcs Hose Clamp Pliers, Long Reach Wire Spring Hose Clamp Pliers Remover for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps

  • Comprehesive Plier Clamp Set: Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Durable: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • Comfortable Grip: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • Package includes: 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Blow Mold Case: The hose clamp pliers is packed in a heavy-duty, blow-molded case with precision-size....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

6Pcs M3 Duplex Bolt Cable Clamp Duplex Wire Rope Clamp Double Clamp Wire Rope Clamps 304 Stainless Steel Cable Clamps Accessories for Industry Construction Home

  • Material : Made from 304 stainless steel for corrosion resistance and durability, thick material, large bearing capacity..
  • The M3 duplex bolt cable clamp is suitable for 3 mm wire rope..
  • Easy to use : The duplex wire rope clamp is made of bolt bases and nuts, washers , which has stronger locking ability and more stability. Duplex clamp is characterized by simple and practical design and easy to use. When you use it, twist the nut with a wrench on the double chuck, then wind the cable on each side of the bolt, and then use a suitable wrench to tighten the nut..
  • Wide application : Heavy duty wire rope clips is a necessity of our life. Duplex clamp can be used to fix clothesline, sun sail, awning, banner, cable, and can also be widely used in industry, construction, transportation, ship and anchor. For safety, make sure to use the correct number of cable clamps. It is recommended to use 3 duplex clamp at each end to prevent the cable ends from slipping out..
  • Package : You will get 6x M3 double clamp wire rope clamps..
Check Stock

OTC 4525 Drake Off Road Cable-Type Flexible Hose Clamp Pliers

  • Drake Off Road Cable-Type Flexible Hose Clamp Pliers Allows technician to access the flat-type hose clamps located in hard-to-access areas.
  • Drake Off Road Plier has locking mechanism to hold clamp in the open position.
  • Makes removal and installation of clamp much easier.
  • Drake Off Road Cable-Type Flexible Hose Clamp Pliers Heavy-duty 24" cable flexes to almost any position.
Check Stock