Best Metric Clamp Set

ABN Auto Valve Spring Compressor C Clamp Tool Set Service Kit for Motorcycle, ATV, Car, Small Engine Vehicle Equipment

  • SAFE & EASY COMPRESSION: The ABN Auto Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs.
  • VARIOUS APPLICATIONS: Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment.
  • All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings.
  • BUILT TO LAST: Each component is constructed from high-quality metal with a black-oxide finish for maximum strength and longevity that resists rust and corrosion.
  • EASY STORAGE: Heavy-duty 13.3” x 8” x 2.3” inch (33.8cm x 20.3cm x 5.8cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (5) metric collets – 16mm, 19mm, 23mm, 25mm, 30mm, (3) extension screws, (1) spring compressor U-clamp with a maximum jaw opening of 9.5 inches, (1) compression bar, and (1) storage case for your convenience.
Check Stock

uxcell Flaring Tools Set Hydraulic Tube Flare Kit 45 Degree Eccentric Cone Head

  • FLARING RANGE - (Including Inch and Metric Die) Inch: 1/4-inch to 3/4-inch(1/4-inch, 5/16-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch).
  • CLUTCH FUNCTION - The clutch in the handle limits over-tighten the flare..
  • ECCENTRIC CONE HEAD - 45 Degree Eccentric Head producing 45 Degree flares in soft copper, brass and aluminum tubing..
  • CONVENIENT - A single clamp screw provides for east clamping and removal of tubing. Package also contains a reamer and a tube cutter for your....
  • EASY STORAGE - Plastic carrying case for neat storage..
Check Stock

Bora 50” Ruled WTX Clamp Edge Extension for WTX Clamp Edge Saw Guide for Woodworking Contractors Carpenters and DIY 50 inch Extension 545060

  • COMPATIBLE WITH BORA WTX CLAMP EDGE: The WTX Extension is designed specifically to work with the Bora WTX Clamp Edge Saw Guides.
  • EXTEND YOUR CUTTING CAPACITY: With the 50 inch WTX Clamp Edge Extension you will get another 50 inches of cutting capacity to add to any length Bora....
  • GET IT STRAIGHT EVERY TIME: This rigid aluminum guide extension is a must-have accessory for keeping your cutting on track. It’s 50-inch length....
  • MAKE MEASURING EASY: A ruled edge with both metric and imperial measurements make your job of getting perfect cuts quick and easy.
Check Stock

Ruland OD21/33-AT Oldham Coupling Disk, Black Acetal, Bore, 1-5/16\ or 33.3mm OD

  • Ruland oldham couplings have a zero-backlash balanced design for reduced vibration at speeds up to 4,500 RPM. They can accommodate high amounts of parallel misalignment (up to 10% of the hub OD)..
  • Acts as a mechanical fuse stopping power transmission during a torque overload. User can combine clamp or set screw hub with inch, metric, keyed, or keyless bore for a high level of customization..
  • Made from acetal for higher torque and torsional stiffness capabilities than nylon..
  • Proprietary hub machining process for smooth interaction between the hub and disk allowing for significantly longer life..
  • Ruland oldham coupling disks are RoHS3 and REACH compliant.
Check Stock

Craftsman 11 Piece Socket Wrench Set 6 Point, 9-34861

  • The Craftsman 11 piece 1/4 in Metric Socket Wrench Set is perfect for working on foreign automobiles and motorcycles as well as other projects requiring metric sockets.
  • Set includes a 1/4 inch drive ratchet plus a 1-1/2 inch extension as well as nine different sized sockets (5, 6, 7, 8, 9, 10, 11, 12 and 13mm).
  • This metric wrench set comes in a sturdy black plastic carrying case, which keeps all your sockets neatly organized with clearly marked socket sizes so you always know which one you're reaching for.
  • Backed by Craftsman's Lifetime Guarantee.
Check Stock

SATA 212-Piece Ultimate Socket Set 1/4-Inch, 3/8-Inch, 1/2-Inch Drive - ST09511U

  • [VERSATILE SET] 6 Spark Plug Sockets, 23-1/4" Dr. 6PT SAE and Metric Sockets, 19- 1/4" Dr. 6PT SAE and Metric Deep Sockets, 29-3/8" 6PT SAE and Metric Sockets, 24-3/8" Dr. 6PT SAE and Metric Deep Sockets, 39-1/2" Dr. 6PT SAE and Metric Sockets, 29-1/2" 6PT SAE and Metric Deep Sockets, 35-1/2" Dr. 12PT SAE and Metric Sockets, 8-1/2" Dr. 12PT Deep Metric Sockets.
  • [ACCESS] Sockets Feature Off-Corner Loading to Reduce Fastener Rounding.
  • [LONG-LASTING] Full Polish Chrome Finish.
  • Chamfered Opening to Guide Fastener Into Socket.
  • [READABILITY] Large Hard-Stamped Size Identification.
Check Stock

BOXO USA Heavy Duty Toolbox 103 Piece MotoBox Tool Box with Locking System - Black

  • Our New MotoBox has everything you need to make sure your bike is dialed in..
  • Designed for professionals and the weekend warriors, it's the perfect set up to have in the pit or in the back of the truck..
  • 12-Piece 1/4" Metric drive 6-Point socket set (4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm). 7-Piece 3/8" Metric drive 6-Point socket set (15, 16, 17, 18, 19, 20, 21mm). 5-Piece 1/2" Metric drive 6-Point socket set (22, 24, 27, 30, 32mm). 10" Groove joint water pump pliers. 6" Long nose pliers. 7" Heavy-duty diagonal side cutter. 5-1/2" Scissors. 4" Flush cutter. 6-Piece 1/4" Drive screwdriver set (SL3, SL4, SL5.5, SL6.5, PH1 & PH2)..
  • 15-Piece Metric combination wrench set (6, 7, 8, 9, 10, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 27mm). 1/4" and 3/8" Drive 90-Tooth ratchet wrenches. 3-Piece 1/4" Drive socket extension bars (2", 4", 7" lengths). 2-Piece 3/8" Drive socket extension bar (4", 7" lengths). 1/2" Drive socket extension (3" length). 1/4" Drive Universal joint. 3/8" Drive to 1/4" Drive adapter. 3/8" Drive to 1/2" Drive adapter. 1/2" Drive Swivel handle (15" length)..
  • 7-Piece ¼” Drive hex bit and torx sockets (H3, H4, H5, H6, T15, T20, T25). 11-Piece 3/8" drive hex bit and torx sockets (H5, H8, H9, H10, H12, T27, T30, T40, T45, T50, T55). 2-....
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ... the end face of various rotary surfaces and rotating bodies by Brushless Power 900W/110V,The length of center is 31.50"(800mm),Swing Over Bed is 8.27"(210mm),Rotary diameter of tool rest is 5.51"(140mm),Spindle bore is 1.50"(38mm),Diameter of chuck is 4.92"(125mm),Width of lathe bed is 3.94"(100mm),Thread standard:Metric/imperial/customized.❥This lathe is capable of adjusting set screws for accurate operation..
  • ⚙【High Precision Operation】High Precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly, we also offer optional four-jaw chucks.In the X axis direction can be automatic feed,Automatic feed speed can be adjusted,Automatic feed range reached 0.01mm-0.4mm.❥The tailstock is movable and fixed with a maximum center distance of 31.5 inch at the far right.With the MT2 taper in tailstock spindle..
  • ⚙【Variable Speed】The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and inch systems without changing gears automatically❥.There are three ways to start turning: manual start, automati....
Check Stock

Gage Ball 3mm W 4/48 Stem

  • Supplied w a painted & labeled stand to hold all precision indicator balls for easy accessiblilty.
  • Supplied with a wooden storage case to protect the set and stand..
  • Inch/Metric software is compatible with DOS and Windows systems..
  • 31 piece Metric Set also available containing metric balls ranging from 2mm to 32mm..
Check Stock