Best Bronze Toggle Bolts

Fixed TV Mount for Steel Stud, No Stud, Hollow Wall, Wood, Concrete, Brick Universal Bracket for 42 to 75 Inch TV's. Includes No Stud & Steel Stud TV Mount Mounting Anchors

METAL STUD WALL MOUNT KIT - It fits most flat TV’s between 42” to 75” weighing up to 132lbs with VESA from 200 x 200mm to 400 x 400mm Screws for SAMSUNG, LG, SONY, TCL, VIZIO, HISENSE,INSIGNIA, PANASONIC, SHARP, and all major brands are included. M8 x 45mm TV mounting Bolts for Samsung TVs.
SUITABLE FOR ANY WALL – Yes, that’s right. Unlike other TV mounts on the market, our heavy duty cold rolled steel mount is designed for any wall including drywall with metal studs, wood stud, concrete walls and brick walls too. We’ve just made life so much easier..
DESIGNED FOR METAL STUD WALLS – each of our TV wall mounting units come with a metal stud mounting anchors, heavy duty toggle bolts and toggle bolts screws, so you don’t have to make any late night runs to the hardware store..
LOW PROFILE– low-profile design securely holds your TV only 1.4" from the wall with stylish appearance.
200lbs DRYWALL ANCHORS INCLUDED: Mounting just drywall without STUD or on STEEL STUDs is possible with the 4 units of 1/4-20 TOGGLER drywall anchors which are included in this TV MOUNT. Easy to us TOGGLE anchors that are rated for 200lbs on 1/2" drywall. NEW DESIGN that Saves installation time compared to most drywall and toggle anchors available..

This anchor set is perfect for mounting a wide variety of objects in drywall and other surfaces where simple fasteners are impractical..
Set includes plastic self drilling hollow-wall anchor, molly bolt, toggle bolt with self-tapping screws.
The ribs on the plastic anchors prevent the anchor from turning in the hole during installation.
The molly bolts Hollow wall anchors with pointed ends can pierce drywall using just a hammer.
These toggle bolts are anchors for use in hollow walls and hollow masonry applications.

Toggle Bolt and Wing Nut Kit. Color: Silver. Material: Stainless Steel..
Sturdy and well-made: high quality stainless steel anchors, environmentally friendly materials. Stainless steel can be used in wet environments and will last for a long time. We offer great toggle bolt kits..
How to apply this kit: First, you'll need to drill a hole (large enough to go through the folded spring wings), then thread these toggle bolts through the hole. At this point the wings are released and clamped inside, then the bolts are pulled down to tighten, taking care to leave enough room for the wings to loosen. Finally, it is best to use an electric screwdriver to screw in the screws..
Wide compatibility: widely used in hollow substrates such as hollow brick, gypsum board, fiber cement board, wood board, etc., suitable for installing lamps, curtain rods, photo frames, coat racks, power switches and other lamps..

EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..

HIGH-QUALITY – Our brand of single Toggle switch wall plate is made of a high-quality metal and sturdy enough to survive any hard impact, and last a lifetime.
EASY TO INSTALL – This wall plate flexible is easy to install in just a few minute by an expert or DIY/ novice. It comes in 4 packs, 8 screws, and features a oil rubbed bronze finish..
COPPER FINISH – The finish enhances it resistant to dust, easy to clean, warp resistant with a smooth flat installation.
SPECIFICATION – This universal 1-gang Toggle switch wall plate is perfectly sized (4.9” H x 3.1"W) for a standard Toggle switch.
APPLICATIONS – The wall plate for switches is perfectly applicable to homes, offices, commercial and other building with any Toggle styled switch. If you want to upgrade the look of your standard wall Toggle switch this is the best choice for you.

HIGH-QUALITY – Our brand of single Toggle switch wall plate is made of a high-quality metal and sturdy enough to survive any hard impact, and last a lifetime.
EASY TO INSTALL – This wall plate flexible is easy to install in just a few minute by an expert or DIY/ novice. It comes in 4 packs, 8 screws, and features a oil rubbed bronze finish..
SATIN NICKEL FINISH – The finish enhances it resistant to dust, easy to clean, warp resistant with a smooth flat installation.
SPECIFICATION – This universal 1-gang Toggle switch wall plate is perfectly sized (4.9” H x 3.1"W) for a standard Toggle switch.
APPLICATIONS – The wall plate for switches is perfectly applicable to homes, offices, commercial and other building with any Toggle styled switch. If you want to upgrade the look of your standard wall Toggle switch this is the best choice for you.

Durable toggle bolt great for hanging and fixing objects on hollow wall..
Size: 1/4x3-in (1/4 inch bolt diameter, 3 inch long). Requires a 3/4" drill bit..
Zinc-plated carbon steel to resist corrosion in wet environments.
Package: 8 pieces toggle bolts,comes with spring-action wings and instruction..

The swag ceiling hooks are perfect size and heavy duty enough, so that are suitable for hanging canopy, plant basket, wind chimes, sheer curtains etc..
Ceiling hooks are easy to install, long toggle bolt with spring toggle wing for hollow wall and solid pointed metal screws for solid wall..
6 sets ceiling hooks can bear 25 lb on solid walls, bear 15 lb on plaster, wallboard and hollow walls..
These swag hooks are made of sturdy metal, which make hooks hold item firmly and safe..
There are ceiling swag hooks, metal bolts, zinc plated screws, spring toggle wings, In total 6 sets..