Best Blow off Valve Upgrade Kit

FILOL 2PCS Blue Aluminum Alloy Universal Car Turbo Whistle, Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail (L)

  • ✿After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
  • ✿Size Exhaust volume Exhaust Pipe Diameter S:10.26x5.25cm, M:10.3x5.9cm,L:11.6x6.3cm,XL:12x6.9cm.
  • ✿Made of durable material,anti-corrosion and wear resistance.Light weight.Easy to install on the car’s tailpipe..
  • ✿Beautiful appearance, very fashionable,it is the first choice for decorative car.Perfect match and make your car fashionable and unique..
  • ✿KEY: Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large Aluminum Alloy Universal Car Turbo Whistle Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large.
Check Stock

PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014

  • This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engi....
Check Stock

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

KOOTANS 1 Pair Service Emergency Gladhands with Valve Switch Die Cast Aluminum Valve Glad Hands Universal Air Hose Brake Coupling Connector Handshake Kit for Truck Semi Trailer Tractor RVs

  • For the Glad Hands with Valve, the valve is available to control opening and closing. The red valve can be connected with an air blow gun..
  • Kit Contains: 1 pair Gladhands with Valve(Red + Blue) + 1 pair Brass Fittings. Color coded red & blue Gladhand for ease of emergency and service line identification..
  • Glad Hands Port Size: 3/8'' FPT, 3/4'' MPT or 1/2'' FPT(The connector at the port can be removed as required). Red Side Port: 1/4'' FPT, air blow gun can be connected, so NO PLUG for the hole.
  • Brass Fitting: one port: 3/8'' MPT. Another port can connect 6mm air hose..
  • Handshake Kit was constructed of die cast aluminum with stainless steel wear plates. Service and Emergency configurations (polarized) or Universal (non-polarized). Meets SAE J318 requirements. We offer an 1-year after-sales service for this product. Any problems, please contact us..
Check Stock

Hausse Heavy Duty Air Compressor Accessory Kit, Air Blow Gun and Air Hose Fittings, 1/4\ NPT Air Tool Kit with 116 PSI Rubber Hose Tire Inflator Gauge

  • Tire Inflator with Gauge: Tire inflator with ventilation valve and pressure gauge, air blow gun are all combined in one easy to use unit. Clear and easy to read display dial with 0-220 psi gauge (No more than 140 PSI is recommended). Heavy duty metal construction that is corrosion-resistant and very durable..
  • Multipurpose: PSI measurements can be clearly displayed even when not connected to the air compressor. The vent valve can release excess air without removing the chuck of the tire stem..
  • Standard Blow Gun with Nozzles: All metal construction standard air blow gun with 1 nozzles and 2 inflation needles, all-purpose use for bicycles, air mattresses, balls, etc..
  • Great Air Compressor Kit: Applicable to all you need to start your project. The inflator can be connected to any 1/4 Inch NPT air compressor output to quickly inject optimal pressure to the tire..
  • Set Contents: 1 air blow gun and 2 nozzles, 1 Filling gun with valve connector hose, 7 adaptors plus adaptor attachment..
Check Stock

MITZONE Upgrade Aluminum Valve Cover Kit Compatible with 1998-08/2002 BMW Z3 323i 325i 328i 330i 525i 528i 530i X5 M52/M54 2.5L 2.8L 3.0L Part # 11121432928

  • ✅ This performance aluminum valve cover and gasket kit is a premium upgrade version to be of an impressive manufacturing quality. And this UPGRADE ALUMINUM Cylinder Head Cover kit installs and functions more durable than the OEM plastic kit..
  • ✅ Upgrade Aluminum Valve Cover Compatible with E39 E46 E53 Compatible with 2000 BMW 323CI.
Check Stock

2 Pack - Continental Bike Tube, 26\ x 1.75-2.50, 42mm Schrader Valve

  • Complete Kit - The bike tube set contains two butyl rubber tubes and two tire levers for a fast and easy replacement process.
  • Reliable Tested Material – Resistant to puncture, thicker walls retain air longer and prevent high pressure blow outs thanks to mould cured rubber.
  • Schrader Auto Valve – The reinforced rubber base and extremely robust regular 37mm Schrader AV Valve prevents shearing off.
  • All Bike Types Covered - User-friendly tube system is suitable for bike sizes from kids bicycles to mountain bikes and beach cruisers.
  • Our products are backed by a 100% satisfaction guarantee. If you have any concerns, contact us through Amazon's messaging centre and we'll do whatever it takes to make sure your experience meets or exceeds expectations!.
Check Stock

Boosted Solutions same as ProCharger big red Bypass bov blow off valve w/Flange

  • Photo of internal parts is in our item gallery for you to see!.
  • This BLOW OFF VALVE was made by boosted solutions and is an exact same blue print blow off valve as procharger for 1/3 the price. Same high quality material and same exact specs as big red. 60MM and for 700 to 1200 horse power. Comes with aluminum flange and bolts. Please see all pictures with the parts..
  • Full details listed below in description!.
Check Stock

ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools

  • ...raze, and solder with precision and efficiency.
  • EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding.
  • To create a neutral flame, you must find the correct relationship of oxygen to acetylene.
  • After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch.
  • Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch.
  • BUILT TO LAST: Constructed of heavy-duty metal parts, this welding torch set is ideal for first-time metal workers.
  • This brazing kit is designed with copper tips and brass fittings for strength, durability, longevity, and precision.
  • The plastic blow molded case provides safe storage for this portable torch kit.
Check Stock