Best Blow off Valve Mounting Kit

kipa Pressure Washer Manifold Kit for Briggs Stratton 020228 Pressure Washer EXWGV1721, Replace Part 16031 190627GS 190574GS Injector Inlet Valve Mounting Bolt

  • New Pressure Washer Manifold Kit For Briggs Stratton 020228 Pressure washer EXWGV1721, Replace part 16031 190627GS 190574GS injector inlet valve Mounting Bolt.
  • Top Quality CNC-Machined KIPA Pressure Washer Manifold Kit, easy to install. Directly Fit.
  • Fits for Briggs model number 020228. Please do match the part Number and the structure before purchasing, Thanks.
  • Pressure washer model EXWGV1721 -- It includes a shorter extension but if you like. You can remove the short one and install the longer one that is on the OEM manifold.
  • Please note: Please be sure to mount it in the proper direction. If it is mounted backwards, it will blow the casting apart as soon as the engine starts, right where the unloader valve comes out of the manifold.
Check Stock

American Standard 6045.505.002 Exposed Manual Flowise 0.5 Gpf Urinal Flush Valve Only for Retrofit, Polished Chrome

  • SloanA-37-A Urinal Repair Kit, 1. 5 Gpf - 3301037.
  • Consists of: Diaphragm (A156A), Guide (A163A), Relief Valve (A19AU), and Disc (A15A).
  • Use for Older Siphon Jet and some blow out urinals.
Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • ...heat roofing materials, and preheat metals for welding and soldering.
  • The lengthy torch and hose allow you to work safely and easily in hard to reach areas.
  • [Easy to Use]: Connect the blow torch and hose to the other end of the hose to a gas tank.
  • After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
  • Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
  • Fire will extinguish naturally to remove gases from torch and hose.
  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Cla....
Check Stock

FILOL 2PCS Blue Aluminum Alloy Universal Car Turbo Whistle, Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail (L)

  • ✿After installed this product, the pressure blowing out of your exhaust will make your vehicle sounds like a turbo vehicle with the turbo system or blow off valve..
  • ✿Size Exhaust volume Exhaust Pipe Diameter S:10.26x5.25cm, M:10.3x5.9cm,L:11.6x6.3cm,XL:12x6.9cm.
  • ✿Made of durable material,anti-corrosion and wear resistance.Light weight.Easy to install on the car’s tailpipe..
  • ✿Beautiful appearance, very fashionable,it is the first choice for decorative car.Perfect match and make your car fashionable and unique..
  • ✿KEY: Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large Aluminum Alloy Universal Car Turbo Whistle Car Refitting Turbo Whistle Exhaust Pipe Sound Turbo Tail Turbo Sound Noise Exhaust Muffler Pipe Whistle - Aluminum Sound Exhaust Muffler Pipe Whistle Blow Off Valve BOV Simulator - Small to Extra Large.
Check Stock

PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014

  • This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engi....
Check Stock

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

KOOTANS 1 Pair Service Emergency Gladhands with Valve Switch Die Cast Aluminum Valve Glad Hands Universal Air Hose Brake Coupling Connector Handshake Kit for Truck Semi Trailer Tractor RVs

  • For the Glad Hands with Valve, the valve is available to control opening and closing. The red valve can be connected with an air blow gun..
  • Kit Contains: 1 pair Gladhands with Valve(Red + Blue) + 1 pair Brass Fittings. Color coded red & blue Gladhand for ease of emergency and service line identification..
  • Glad Hands Port Size: 3/8'' FPT, 3/4'' MPT or 1/2'' FPT(The connector at the port can be removed as required). Red Side Port: 1/4'' FPT, air blow gun can be connected, so NO PLUG for the hole.
  • Brass Fitting: one port: 3/8'' MPT. Another port can connect 6mm air hose..
  • Handshake Kit was constructed of die cast aluminum with stainless steel wear plates. Service and Emergency configurations (polarized) or Universal (non-polarized). Meets SAE J318 requirements. We offer an 1-year after-sales service for this product. Any problems, please contact us..
Check Stock

Hausse Heavy Duty Air Compressor Accessory Kit, Air Blow Gun and Air Hose Fittings, 1/4\ NPT Air Tool Kit with 116 PSI Rubber Hose Tire Inflator Gauge

  • Tire Inflator with Gauge: Tire inflator with ventilation valve and pressure gauge, air blow gun are all combined in one easy to use unit. Clear and easy to read display dial with 0-220 psi gauge (No more than 140 PSI is recommended). Heavy duty metal construction that is corrosion-resistant and very durable..
  • Multipurpose: PSI measurements can be clearly displayed even when not connected to the air compressor. The vent valve can release excess air without removing the chuck of the tire stem..
  • Standard Blow Gun with Nozzles: All metal construction standard air blow gun with 1 nozzles and 2 inflation needles, all-purpose use for bicycles, air mattresses, balls, etc..
  • Great Air Compressor Kit: Applicable to all you need to start your project. The inflator can be connected to any 1/4 Inch NPT air compressor output to quickly inject optimal pressure to the tire..
  • Set Contents: 1 air blow gun and 2 nozzles, 1 Filling gun with valve connector hose, 7 adaptors plus adaptor attachment..
Check Stock

2 Pack - Continental Bike Tube, 26\ x 1.75-2.50, 42mm Schrader Valve

  • Complete Kit - The bike tube set contains two butyl rubber tubes and two tire levers for a fast and easy replacement process.
  • Reliable Tested Material – Resistant to puncture, thicker walls retain air longer and prevent high pressure blow outs thanks to mould cured rubber.
  • Schrader Auto Valve – The reinforced rubber base and extremely robust regular 37mm Schrader AV Valve prevents shearing off.
  • All Bike Types Covered - User-friendly tube system is suitable for bike sizes from kids bicycles to mountain bikes and beach cruisers.
  • Our products are backed by a 100% satisfaction guarantee. If you have any concerns, contact us through Amazon's messaging centre and we'll do whatever it takes to make sure your experience meets or exceeds expectations!.
Check Stock