Best Ball Pipe Fitting Valve

WADEO Rain Barrel Spigot, Brass Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting-Black

  • Two installation methods: Brass bulkhead fittings front mounting and back mounting. Designed for irrigation with Rain Barrel, Not for Portable Water, Not Lead Free Compliant..
  • Heavy Duty 3.2 oz Solid Brass Bulkhead Fitting, 1/2" Female to 3/4" Male water tank connector bulkhead tank fitting. Heavy duty 3/4"water outlet no kink quarter turn solid brass ball valve can conntect with garden hose.
  • Bulkhead fittings need 1 inch diameter holes to install. Fit up to 0.78 inch thickness wall..
  • Tools Needed for Installation: Electric drill, 1 inch hole saw, and pipe wrench or adjustable wrench..
  • Two washers (6.8mm between inner ring and outer ring), which can help you install the rain barrel spigot conveniently and effectively prevent leakage..
Check Stock

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • ...tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different....
Check Stock

MUNTE - SS304 Stainless Steel Female Threaded 3 Way Tee T Pipe Fitting 1/8" 1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" BSP Threaded (1")

  • Pipe Fittings and Tools include: Pipe fittings,copper pipe fittings, black iron pipe fittings, water pipe fittings, stainless steel pipe fittings, cpvc pipe fittings, iron pipe fittings, ABS pipe fittings, RV pipe fittings, Pipe fitting tools, PVC pipe fittings, PE pipe fittings..
  • Metal pipe fittings, Stainless steel pipe fittings, Socket, Female socket, Male socket, Wye, Tee 90, Elbow 90, Elbow 45, Reduced valve, Female elbow 90, Male elbow 90, Reduced tee, Reduced bush, cleanout, End Cap, PVC solvent cement, Clamp saddled, Flange, Steel backing ring, Adaptor, P trap with cleanout plug, Gasket, Valve.
  • Products are well manufactured, durable and have a long life, easy to disassemble and move during use..
  • Excellent quality, fast delivery, good after-sales. We promise to do everything in our power for you to be 100% satisfied.
Check Stock

Robinair 18560 A/C and Refrigeration Valve Core Remover/lnstaller

  • Robinair Air Conditioning Valve Core Remover and lnstaller - the ideal tool for replacing damaged valve cores or performing A/C or refrigeration service that necessitates valve core removal.
  • Attaches to 1/4 inch male flare access fittings and allows valve core removal and replacement without loss of refrigerant.
  • Durable, solid brass tool has a ball valve that can be opened and closed in just a quarter-turn, rather than a slower to operate stem-type valve.
  • Ball valve features a corrosion resistant stainless steel ball for smooth action and a reliable seal.
  • Durable brazed side fitting allows system access for various A/C service procedures.
Check Stock

Zooz Z-Wave Plus 700 Series Titan Water Valve Actuator ZAC36 | Compatible with SmartThings

  • SMART FLOOD PREVENTION: Shut your main water valve automatically when a leak is detected to prevent costly water damage. The Titan actuator installs over your ball valve and comes with a plug-in leak detector to monitor water presence around it. It will work offline with the probe connected directly to the Titan but the device works best when included to a compatible Z-Wave hub (sold separately) for full wireless functionality..
  • EXTREMELY STRONG: Unlike other retrofit solutions, the Titan is equipped with a powerful motor that opens and closes even the most stubborn valve reliably. It calibrates on each individual valve once installed for optimal performance..
  • DIY INSTALLATION: You don't need any tools and it takes just a few minutes to mount and calibrate the device. You can use it outdoors too! Follow the steps in the manual and installation video carefully when installing the product. Check your set-up before buying: suitable for 0.5" - 1.25" ball valves only.
  • 3" clearance from the valve center to each side on the pipe, at least 1.25" clearance between the valve handle and the pipe, at least 1" clearance between the pipe and the wall..
  • Z-WAVE COMPATIBLE: Get the most of your Titan Valve Actuator when you include it to your Z-Wave hub. Program it to s....
Check Stock

Junniu Automatic Waterer Water Dispenser Trough Bowl Kits for Horse Dog Cattle Livestock Goat Pig Farm Supplies, with Float Valve, Water Hose, Stainless Steel Cover, Hole at the Bottom(Green)

  • 【Package includes】 1 PCS Automatic water bowl (includes 1PCS 1/2 Inch float valve).
  • 【Material】Automatic water bowl is Made with high performance material which is very durable and no rust, no deformation. 1/2 Inch Adjustable float valve is made of hard ABS, will not corrode or rust..
  • 【Size】Automatic water bowl: About 11"(L)*10.6"(W)*5"(H), Could holds 4 liters of water.
  • Pipe length:80cm/31.5 inch (Pipe diameter is 1/2").
  • The float ball valve has a 1/ 2 NPT pipe thread,and the total length is about 24cm /9.44 inch..
  • 【Easy to Use】Automatic water bowl could easily connects to 1/2" pipe, flex hose, or garden hose.With drainage hole at the bottom, which can discharge residual sewage, which is more convenient..
  • 【Automatic Water Supply】Automatic water bowl can automatically replenish and cut off water through the float valve. The plastic float valve is light in weight and can accurately sense changes in the water level. When the water level rises to the horizontal line, the water source is cut off, and when the water level drops, water is added in time..
Check Stock

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock

2 Way Connection Heavy Duty Air Chuck Set-1/4 Inch Female NPT Closed Ball tire Chuck Dual Head Air Chuck and Standard Male Quick Plug Tire Air Fill Kit for Tire Inflator Gauge and Air Compressor

  • ➤【What in the box】 Includes 1 pcs dual head closed flow air chuck, 1 pcs ball head air chuck, 1pcs male quick plug/fitting, 1pcs teflon tape. Both air chucks with closed flow air chucks, which will shut down the air flow and air flows only the chuck engaged with tire valve cores. Wide applicable and convinient for inflating schrader valve of most bike, motorcycle, car, truck, etc..
  • ➤【Solid and Durable】 Constructed with high quality solid metal alloy and brass, offers more hardness and durability, corrosion resistance and wear resistance, which is a perfect choice no matter for business or household use, will serve you faithfully for years..
  • ➤【2-way Easy Connection】 Both air chucks featured a female 1/4"NPT thread for easily connected to air lines, air compressor or tire inflator gauges for tire inflation. Also included a standard 1/4" male quick plug, for easy and swiftly connecting to air lines' female quick couple..
  • ➤【Dual Head Air Chuck】 Featured with 1/4" inch female national pipe thread, extended metal alloy air rod, 2-in-1 dual head closed flow air chuck, allows for inflating easily on awkwardly located tie valves, easy push or pull operation, quickly tire air fill with no air leakage..
  • ➤【Ball Air Chuck】 Featured with ....
Check Stock

GASHER 6PCS 1/4 Inch NPT Brass Pipe Fitting Ball Valve Barstock Tee Brass Pipe Fitting and Air Hose Fitings

  • 【DURABLE】: Not a cast product, more robust and durable than castings. Max. pressure 150 PSI..
  • 【MATERIAL】 Durable solid brass construction is resistant to corrosion and long-lasting..
  • 【THREADS】 Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
  • 【TEMPERATURE RANGE】 Operating temperature range of -65 to +250 degrees F..
Check Stock