Best Auto Tapping Machine

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....

Check Stock

CoCud Thread Milling Taps 1/4-32 UNEF Thread 2B High Speed Steel Machine 3 Straight Flutes Screw Threading Tool - Applications for Tapping Drilling Machine 1-Piece

... Wide Application --- For threading through holes or shallow blind holes. 3 straight flutes design, rapid downward chip removal. Make new female threads or re-thread damaged female threads in stainless steel, ordinary steel, copper, aluminum, iron, alloy steel, plastic..
★ Machine Taps --- Machine taps are used in tapping machines, vertical drilling and milling machines. M1-M3.5 micro taps process wood and soft metals with lower hardness, mainly used in clocks and watches. Drill holes with a twist drill before tapping..
★ High Speed Steel --- The high speed steel tool has high hardness, high strength, good toughness, wear resistance, and heat resistance. Only the base substrate, without any additional coatings, good for a wide range of applications..
★ Useful Tips --- Control speed based on material hardness. Add appropriate tapping oil for higher quality internal threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter (eg: diameter=6mm (M6), maximum tapping depth=9mm). The tapping angle should be 90 degrees vertical and stable..

Check Stock

US STOCK SFX M16R M3-M16 Electric Tapping Machine 1200mm Arm 360° Universal Electric Tapper 0-375RPM/min With 9pcs ANSI Imperial Collets Tap Collets

Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable.
Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials..
Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set)9pcs ANSI Collets:1/4", 5/16", 5/32 ",1/16", 3/16 ",7/32 ",3/8", 7/16", 1/2"..
Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost..
Free Shipping.ETA:7-12 days.No Import Duty.1 year....

Check Stock

MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)

【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping..
【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material..

Check Stock

ZXFOOG Stainless Steel License Plate Screws-Rust Proof Car Tag Bolts for Fastening License Plate Cover, Front or Rear License Plate Frames with Screw Black Caps (M6 Screws+Chrome Caps)

...hield/diamond/ skull/American flag/patriots license.The complete set of screws is suitable for license plate installations such as Jeep cherokee,jeep wrangler, Acura, Audi, BMW, Tesla,mustang,Honda,Toyota,Lexus,VW,Nissan,Ford.
【Stainless Steel License Plate Cover Screws】: A set of 8 M6 Self tapping screws are made of 100% stainless steel, will never rust or corrode through decades of years.1/4-14-3/4" screws with 3/8" head license plate fasteners Fit most domestic Cars and trucks,motorcycles. Can install the front and rear mounting bracket/tag to most vehicle. Other popular metal screws will rust and damage your license plate holder and car body.
【Easy To Install】:M6x20mm Standard screws size, will fit most American and Import cars.Great for cars, trucks, motorcycles and RVs. 4 solid Stunning Premium Smooth chrome Finish license plate screw caps are used to hide the screws,can better compatible with your license plate frame and license plate.Our upgraded license plate frame screw caps are more durable than universe plastic caps in the market. They’re the thickest license plate screw caps you can find.
【No Rattle】:Enjoy the silence! Eight oversized shockproof pads to prevent the plate from vibrating with the bump....

Check Stock

Aootf Stainless Steel License Plate Screws-8PC M6X20mm Rust Resistant Stainless Steel Screw, Self Tapping License Plate Bolt Fastener for Securing License Plate Frame, Chrome Caps, Anti-Rattle Pad

...late shield/diamond/ skull/American flag/patriots license.The complete set of screws is suitable for license plate installations such as Jeep cherokee,jeep wrangler, Acura, Audi, BMW, Tesla,mustang,Honda,Toyota,Lexus,VW,Nissan,Ford.
Stainless Steel License Plate Cover Screws: A set of 8 M6 Self tapping screws are made of 100% stainless steel, will never rust or corrode through decades of years.1/4-14-3/4" screws with 3/8" head license plate fasteners Fit most domestic Cars and trucks,motorcycles. Can install the front and rear mounting bracket/tag to most vehicle. Other popular metal screws will rust and damage your license plate holder and car body.
Easy To Install: M6x20mm Standard screws size, will fit most American and Import cars.Great for cars, trucks, motorcycles and RVs. 4 solid Stunning Premium Smooth chrome Finish license plate screw caps are used to hide the screws,can better compatible with your license plate frame and license plate.Our upgraded license plate frame screw caps are more durable than universe plastic caps in the market. They’re the thickest license plate screw caps you can find.
No Rattle: Enjoy the silence! Eight oversized shockproof pads to prevent the plate from vibrating with the bumper and cau....

Check Stock

INTBUYING Pneumatic Air Tapping & Drilling Threading Machine Air Drill Tapper Flexible Arm (M3-M12 Tap Collets Vertical)

Tapping Ability of Pneumatic Tapping Machine: steel/aluminum: M3-M12, stainless steel: M3-M8, Range of Rotation: 400rpm(stepless speed regulation), Working radius:39.37"（1.0m）,Working pressure:0.6-0.8Mpa.
Pneumatic Tapping Machine: Avoid the limitations of manual tapping, time-saving and labor-saving, no damage to thread, and the tap is not easy to break. Wide range of activities, heavy workpiece do not need to be moved.Smaller gas pressure and gas (5-8Kg / cm2), large torque output..
Premium Quality: M3-M12 Pneumatic Air Tapper adopts high strength aluminum alloy, smooth running, low noise, stable performance, simplified operation. Clamping cylinder with overload protection device can avoid tap damage.
Applicable Materials: M3-M12 Air Tapper can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials..
Heavier work matter does not need positioning device or mobile, installed plus universal head can easily get.Rapid fast positioning and high cutting speed, increased production capacity..

Check Stock

uxcell M8x1.25mm Straight 4 Flutes Metric Bottoming Taper Hand Taps 3pcs

Tap Size: M12 x 0.5 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock

uxcell Metric Machine Tap M3 Thread 0.5 Pitch H2 3 Flutes Hex Shank High Speed Steel

Tap Size: M2 x 0.4 metric thread, H2 thread tolerance grade, left hand thread cutting. Straight flute design, downward chip removal, clear threads, fast tapping with accuracy..
Material and Finish: High speed steel tool is with high hardness and toughness, heat resistance and wear resistance. Features the base substrate without any coatings. Good for general purpose thread tapping..
Applications: Suitable for processing through holes. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..

Check Stock