Best Auto Isolation Box

Vocal Booth

  • The Aestic microphone isolation booth is convenient, compact and lightweight - after setup the outside dimensions are 10 1/2’’ x 10 1/2’’ x 10....
  • Our recording shield is made with high density 1 ½’’ sound absorbing material to remove echoes and reflections while reducing ambient noise and....
  • The acousting booth box will arrive compressed - to expand the foam sheets for the first use, soak them in water completely for 1 minute, then remove....
  • It works well with a desk microphone and with a mic suspension boom arm stand to record podcasts, videos, music and more. Please note that our booth....
  • Included in this offer is 1 foam isolation box and 1 black cable management tie to organize all your cables and keep your recording station clean and....
Check Stock

Intona 7055-B USB 2.0 Hi-Speed Isolator 5kVrms 20kV ESD Protection

  • No external power supply required. External power can be connected to supply up to 2000mA.
  • Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
  • 1kVrms signal and power isolation, Advanced ESD protection (20kV).
  • Ultra-quiet power rail isolation for less noise in highly sensitive applications (< 1 µV RMS @ 22 kHz BW).
Check Stock

Isolation Amplifiers Isolated Modulator (5 pieces)

  • ➤【DC12-32V】- This isolation module need two complete independent DC12-32V power supply..
  • ➤【Main function】- Main function is input 0-10V analog voltage signal,after isolation, output 0-10V analog voltage signal..
  • ➤【Scope of Application】- Used to isolate high voltage or strong interference voltage or current (voltage) signal then transferred to PLC or controller MCU, isolating controlling end and controlled end, to assure stability and anti-interference ability of system..
  • ➤【Use】- It will has better performance if install this module and controller in a metal box and box is grounded..
  • ➤【Note】- The potentiometer is used to amend corresponding relation of output voltage. Output voltage can be fine adjusted and calibrated, normally it has already been calibrated..
Check Stock

Dayton Audio DSS4-BC Black Chrome Speaker Spike Set 4 Pcs.

  • 【APPLICATION】 Our Isolation Plaform Pad Feet Stand Spikes Is Fit For Record Players / Subwoofer / Turntable /Amplifier / Speaker / Recorder And More Other Hifi Enquipment.
  • 【MATERIALS】Auluminum Alloy ( With Great Anodized, Sand Blasting Finish)+ Rubber Mat(Prevent Slipping, Better Protect The Audio And Foot Pads) + Springs.
  • 【ISOATION PLATFORM DIMENSION】D44x H40mm,4pcs/carton Isolation Feet.
  • 【WITHSTAND WEIGHT】Each Isolation Pad Feet Withstand Up to 9kg/ 19.8lbs, 36kg/ 79.3lbs for 4pcs In Total..
  • 【EASY TO USE】No Need to assemble, Take Out From The Box To Suspend Your Audio Equipment..
Check Stock

The Amador's Store- Silicon Rubber Isolation Pads Non-Skid with Adhesive for Turntable – Record Player Sound Dampening Vibration Absorption Feet Reduces Skipping & Improves Sound – Pack of 4 - Black

  • REDUCE VIBRATION: Absorbing up to 95.32% of vibration and resonance, The Amador's Store Isolation Feet offer an effective solution for optimizing the true sound of stereo equipment. Isolation Feet effectively reduce vibration for all sensitive equipment. Specific design for Turntable Vinyl Records, the supporting foot pads provide a durable hold under your device.
  • EASY TO INSTALL: silicon rubber isolation pads are quick and easy to installation. There is no manual required. Simply uncover the sticker and place it on the correct position of the vinyl record player With high hardness and density. Isolation pads easily boost your audio equipment performance for an all-around natural experience. Our product will absorb vibration a lot of better than the other pads it has shockproof, anti-skid, anti-collision, anti-scratch, and anti-scratch..
  • MATERIAL QUALITY: Pack of 4 rubber pads are more favorable and fit in difference places. These pads are made from high quality (Rubber Silicone) are stronger than other products. Bumper rumble pads protect to skid. It can also avoid much of the vibration that can disrupt the ground floor. Silicon Rubber Isolation Pads with Adhesive..
  • SPECIFICATIONS: silicon rubber isolation pads with adhesive Included are 4 weight per p....
Check Stock

Diversitech CP-16 Condensate Pump, 16' Lift, 120V

  • PUMP WITH MOUNTING PAD: Mini split condensate pump for HVAC systems up to 36,000 BTU (3-tons)..
  • EASY INSTALLATION AND EFFECTIVE OPERATION: Compact pump has an auto start and stop operation complete with vibration/sound isolation mounting pad and all connection accessories..
  • RELIABLE SPEED WITH AUTO ON/OFF: Reservoir features a reliable reed switch with debris screen. Automatic start and stop operation.
  • BY THE NUMBERS: Rated for water temps 41°- 140° F, 50% duty cycle. Suction lift 4 ft..
  • INCLUDED: ½ in. drain inlet adapter and 5 ft. of ¼ in. ID tubing..
Check Stock

Aokeo Studio Recording Microphone Isolation Shield, Pop Filter.High density absorbent foam is used to filter vocal. Suitable for blue yeti and any condenser microphone recording equipment

  • ♪【Eliminate Interference】♪: The inner side of the microphone isolation shield is made of absorbing cotton insulation that can reduce sound reflection when recording..
  • ♪【Flexiblity & Convenience】♪: The folding panel design features enables angle adjustments, giving you optimal insolation. Compact design, lightweight construction as well as fold-ability allows you to carry it easily and take along wherever you go.* Note: This package contains a mic isolation shield and an adapter accessory package. It does not include headphones and microphone..
  • ♪【Durability】♪: Constructed out of premium steel with high-quality screws to ensure sturdiness, and long lasting performance. Can be used without a stand on a flat surface to begin your wonderful journey to experience new horizons would with Aokeo Professional isolation shield..
  • ♪【Versatility】♪: The microphone isolation shield can be fixed on a countertop or tabletop, and also can be mounted to a microphone stand. *Does not include any Aokeo microphones, stands, etc. which is purchased separately. Only the pop shield will be in box*.
  • ♪【Design Style】♪: Block unwanted sounds from entering your microphone by using this Microphone Isolation Shield. This acoustic shield featu....
Check Stock

Beats Powerbeats Pro Wireless Earbuds - Apple H1 Headphone Chip, Class 1 Bluetooth Headphones, 9 Hours of Listening Time, Sweat Resistant, Built-in Microphone - Black

  • Totally wireless high-performance earphones.
  • Up to 9 hours of listening time (more than 24 hours with charging case).
  • Adjustable, secure-fit earhooks for lightweight comfort and stability.
  • Reinforced design for sweat & water resistance during tough workouts.
  • Volume & track controls on each earbud, voice capability, and Auto Play/Pause.
  • Powerful, balanced sound with dynamic range and noise isolation.
  • Earbuds connect independently via Class 1 Bluetooth for extended range and fewer dropouts.
  • With Fast Fuel, a 5-minute charge gives 1.5 hours of playback when battery is low.
  • Enhanced phone call performance and call handling from either earbud.
  • What's in the box - Powerbeats Pro, Charging case, Eartips with four size options, Lightning to USB-A charging cable, Quick start guide (USB power adapter sold separately).
Check Stock

Intona 7055-C USB 3.0 SuperSpeed Isolator 1kVrms 20kV ESD Protection Supports Full Speed 12Mbps,High Speed hi-Speed 480Mbps and SuperSpeed 5Gbps

  • No external power supply required, up to 500mA current on isolated side. External power can be connected to supply up to 2000mA current on isolated....
  • Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
  • 5kVrms signal and power isolation, Advanced ESD protection (20kV).
  • Ultra-quiet power rail isolation for less noise in highly sensitive applications (LT3045).
Check Stock