Best Isolation Switches

SSR-100DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 100A

  • Model: SSR-100DD, single phase Solid State Relay 100A DC to DC control, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 100 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

J-Tech Digital ® Premium Quality SPDIF TOSLINK Digital Optical Audio 3x1 Switch with Remote Control (Three Inputs one Output)

  • Switches three ways of optical fiber signal inputs switch to one set of SPDIF/TOSLINK signal receiving device.
  • Supports Dolby digital & DTS 5. 1, Dolby digital Plus.
  • support PCM stereo 32kHz, 44. 1kHz, 48kHz and 96kHz.
  • input can be selected through remote control or button on the switch.
  • Over-voltage protection can prevent the damage caused by connecting an unmatched power adapter to the machine.
  • Note: Please pull out isolation plastic in the remote before first use. Free lifetime technical support from the manufacture and free 1 year Manufacturer from J-Tech Digital..
Check Stock

MokerLink PoE Switch, 4 Port PoE+, and 8 Port PoE+, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • Include POE-F042F (4 PoE+ Port, 2 Uplink, 100Mbps), and POE-F082GD ( 8 PoE+ Port 100Mbps, 2 Gigabit Uplink).
  • Built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W..
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

MokerLink PoE Switch, 6 Port PoE Switch, and 5 Port Gigabit PoE Switch, 78W High Power, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • 6 Port PoE Switch: 4 PoE+ Port, 2 uplink port, 100Mbps, 78w.
  • 5 Gigabit Port PoE Switch: 4 Gigabit PoE+ Port, 1 Gigabit uplink, 1000Mbps, 78w.
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

Monosaudio 4Pcs 40x20mm Speaker Isolation Feet Speaker Spike Pads with Non-Slip Rubber Rings for Audio,Speakers, Subwoofers, Home Theater, Turntable DAC Feet Pad (Black Color)

  • 【Material】Monosaudio isolation feet made of Aluminum,speaker isolation feet padwith removable Non-slip Rubber Ring,with High Hardness,High Density,low harmonic vibration point and high damping.Each speaker feet can support 100kg/220lb,so one speaker feet pads set can support around 400kg/880lb.Middle Hole:4.5mm(0.17inch).
  • 【Applicable objects】Subwoofer feet,audio equipment feet,amplifier feet,speaker feet,turntable isolation feet pads,CD/DAC/AMP/DVD players&cassettes deck,recorders,amplifier feet,home audio riser pads,isolating speakers,subwoofer isolation feet,pc case feet,audio isolation feet and Other Audio Equipment..
  • 【Reduct Vibration】Using Monosaudio isolation feet for audio can suspend acoustic feedback from your speakers or sub-woofer isolation for vibration.Subwoofer feet offer an effective solution for optimizing the true sound of stereo equipment.Subwoofer feet isolation effectively reduce vibration for all sensitive equipment.The music will be more focused with less noise..
  • 【CNC Machined】Monosaudio turntable feet no need to make holes and no need to use double-sided adhesive,turntable isolation feet can absorbing the harmful vibration from the supporting surface and internal reflection,eliminate the pollution between the groun....
Check Stock

Nuer Car Taxi Isolation Film Plastic, 78.74 x 55.1inch PE Transparent Anti-Fog Full Surround Protective Car Shield Plastic Dividers for Cars

  • Transparent reusable plastic car taxi isolation film: This transparent car isolation film is made of light PE material, transparent material will not block the line of sight, safe, Anti-fog. Just act as Transparent Isolation Wall for Driver and Passenger. Set included 78.74 x 55.1inch taxi isolation film, 2 x Velcro, 40 x Reinforced needle beads.
  • Easy to use and install: Adopted self-adhesive design. Sticky hook and loop can ensure easy installation and removal without damaging the roof. Easy bonding. This taxi car protective isolation film comes with two high-adhesive velcro tapes and reinforced needle beads that will not fall and loose easily. The durable car taxi plastic film will not be damaged when it is torn open. Come with scissors, you can tailor the size according to your needs.
  • Materials: The PE taxi isolation film is non-toxic , , strong and durable. Products can be reused. But remember to disinfect after each use. It's great. After installing it, you can build a safe space for yourself, and it's transparent, super reliable, doesn't affect sight.
  • Safe and full surround protection: The front and rear spaces of the car are divided into separate spaces. Block isolation and divide the space, So as to improve the safety of both sides. To form effe....
Check Stock

Aquarium Fish Breeder Box, Fish Isolation Box, Hatching Box, Juvenile Fish Spawning Incubator, Water Isolation Net Hatchery (Green Square)

  • The large aperture fish breeder tank net is placed in the middle of Fish Isolation Box with the small aperture net. The female fish that is big with baby should be placed in aquarium fish tank breeder with the large aperture net. When the female fish gives birth, the small fish can swim to the small-aperture mesh breeder box through the large-aperture mesh. In this case, the female fish will not be able to eat the cubs in the small aperture net..
  • There is a bubble circle on the upper end of the fish hatching isolation net. The bubble circles are linked together with small wooden sticks. The purpose is to make the isolation net buoyant and not sink into the water. If the small wooden sign falls off during transportation or installation of the product, you only need to manually link the small wooden sign with the foam ring..
  • When using fish breeder tanks net, it is necessary to put stones in the large-aperture isolation net and the small-aperture isolation net, so that the isolation net can be opened to the maximum and the fish have more room for movement. If the stone in the breeder tank is not enough to make the product extender to the max, you can find some heavy objects similar to stones instead and then put them in the breeder box net in order to ma....
Check Stock

Studio Recording Microphone Isolation Shield with Heavy Duty Tripod stand, Pop Filter.High Density Absorbent Foam to Filter Vocal Suitable for Blue Yeti and Any Condenser Microphones

  • 【Package Contains】Studio mic stand 1*5-panel microphone shield stand,1*Heavy duty stand,1*Metal thread adapters,Pop filter*1, 1*3/8-Inch male to 5/8-Inch mic screw adapter. Easy to mount on microphone stand. The height of the isolation shield can be adjusted freely. Isolation shield tripod design for mic stand, the maximum length can reach 83.8 inches / 213 cm, minimum length is 44.5 inches / 113 cm. Duty stand more stable for studio recording. (Microphone and shock mount is not Included)..
  • 【Designed for Recording】Microphone shield stand made of absorbing cotton insulation, the inside of this recording studio equipment reduces echo, while the outer layer can filter unwanted noise. The multi-layer soundproof system can effectively reduce the noise on the back and side, reduce the interference of sound reflection on recording, improve the clarity of the microphone recording mic stand for blue yeti. Record in studio. Microphone isolation shield give you unexpected results..
  • 【Easy to Install】Screw the microphone isolation shield directly into the top of the stand. The stand comes with standard 5/8-inch thread mount. And you can install the isolation shield to any height you want. The microphone isolation shield is more rugged and scratch-resist....
Check Stock