Best Anchor For Concrete Block Wall

Sleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".

CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".

Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

1. New utility and original design. Compare with traditional anchor fasteners, this kind toggle bolts who fixed objects hardly to fall off and make sure safer and more fastness..
2. The specialty of the new toggle bolts is the X shape head (or called scissors head ) who can firmly grasp the inner wall. The X shape head expand like a scissors and provide incredible tensile strength and shear force..
3. Easy installation and can be used repeatedly. The new toggle anchor bolts are widely used in indoor and outdoor such as fix bracket, awning, barriers, furniture, equipment etc..
4. Beautiful shape and good material. All components are high quality 304 stainless steel and offers rust protection..
5. Fit for any concrete, walls, bricks and especially for hollow wall, air brick, foam concrete block and so on..

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

Standard size M8 expansion bolt, 70mm total length, with flat washer and hex nut..
High quality 304 stainless steel. Sturdy and firm, resistant to rust and corrosion. Concrete anchor and masonry anchor , easy to be mounted..
Widely used in fence,burglarproof doors and window,canopy,air conditioning rach fixation,home decoration,engineering,etc..
If the wall is built by relatively soft brick , it may need to make the hole which is 1mm smaller than the suggested..
Air brick, foam concrete block,are not suitable for these expansion bolts..

Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..

HOLDS 2X MORE THAN WING TOGGLES - SNAPTOGGLES Holds up to 1,080 lbs in concrete block and up to 265 lbs in 1/2-in drywall (Industry standards recommend 1/4 of this ultimate load per anchor).
REUSABLE - Metal channel will not fall behind wall - anchor is reusable and works in walls or ceilings 3/8-in to 3-5/8-in thick.
Great for hanging flat screen TV's, grab bars, handrails, cabinets and much more. Can be used with Drywall, Tile, Concrete Blocks, Plaster, and More..
SMALLEST DRILL HOLE - Requires a 1/2-in drill bit. (not included).
Package contains 12 anchors and 12 bolts (Bolts are 2.5 inches) - Packaging may Vary.