Best American Coupler

Coldbreak Keg Coupler, Sankey 'D' Style (Fits USA Kegs), Stainless Steel Probe, Commercial Grade, 5/16" Tailpieces, Black Handle

• Commercial grade sankey ‘d’ keg coupler for domestic brand kegs (i.E. Bud, coors, miller, american craft beer).
• Nsf approved coupler that features a durable chrome plated brass body with a stainless steel liquid probe.
• Built in safety features include a pressure relief valve that is rated up to 53 psi (3.7 bar).
• Comes with (2X) 5/16″ tailpieces. Liquid and gas connections are standard beer nut threads (7/8″-14).
• Short black lever style handle that will fit into the smaller diameter kegs (tall 1/4 barrel kegs).

LitKiwi 2PCS Stainless Steel 304 Beer Keg Coupler Fitting,Beer Line Connector Kit,Hex Nut 5/8'G Thread x 5/16' Barb Fittings,Suit for 5/16' ID Beer Line Hose with Clamps

• ★【Great Marterial】Both the fitting and clamp were made of 304 High quality stainless steel which has high temperature ductility, low magnetic permeability,and low carbon content for greater resistance to corrosion..
• ★【General Size】The Thread—5/8"G(BSP),suit for most American beer keg coupler,the 5/16" Barb suit for beer tube which the ID little less than 5/16",it is bigger than the general-purpose models on the market and can support larger traffic..
• ★【Professional Design】The swivel nut make the installation easier and faster,the elongated Barb part allows the pipe to be installed deeper, and provides clamps to make the pipe fully stable and not easy to fall off..
• ★【Wide Application】Use for most American beer keg coupler,connect line to shanks and couplers.Also can use for other scenes which need the 5/8"G thread to 5/16"barb fitting..
• ★【Package Include】2PCS 5/8"G x 5/16" Barb fittings with 2PCS clamps.If you are not fully satisfied with our product, we will serve you whole heartedly..

BACOENG A Tap Kegerator Door Refrigerator Conversion Kit No Tank

• ...adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines..
• 2. HANDLE D-SYSTEM KEG COUPLER: D-System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
• 3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
• 4. METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without sc....

Kegco KTS97D-W D System Ergonomic Keg Coupler with Lever Handle and Stainless Steel Probe

• This Kegco keg coupler is compatible with all American D System Sankey kegs, allowing you to easily enjoy your favorite domestic beer brands straight from the keg.
• Clickable lever handle clicks up and down to engage the keg, making it more convenient than conventional lever style keg couplers that need to be pulled out before being pushed down.
• The keg probe is made of high-quality stainless steel that is resistant to chemicals, making it more sanitary than chrome plated brass keg couplers.
• Kegco’s commercial-grade keg tap is constructed of durable 304 grade stainless steel that can stand up to use in demanding commercial environments like pubs, bars, and restaurants.
• The keg coupler body features a 55-psi pressure release valve that allows you to easily let the pressure out of the keg.

Single Tap Ultimate Door Mount Kegerator Conversion Kit

• ...cate both how much CO2 pressure is inside of the keg and how much CO2 gas is left in the cylinder..
• LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L “D” System Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
• DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6″ x 4″ door mount drip tray’s clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you’re done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually..
• DELUXE CLEANING KIT: Our deluxe hand pump pressurized cleaning kit is a must-have to easily and effectively clean your beer lines – without the h....

SURIEEN AC Charge Hose with Gauge, R134A AC Refrigerant Recharge Hose Kit, 1/2” Can Tap Dispensing Valve and R134A Quick Coupler Fits for Car AC Air Conditioning Refrigerant 250 PSI

• ★【REMIUM QUALITY】R134A can tap, R134A low side quick coupler and adapter switch made of high quality aluminium alloy, for high heat resistance durability and safety. Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge..
• ★【WIDE COMPATIBILITY】 Car AC recharge kit fits for R134A R12 or R22 refrigerant refrigerant to vehicle or home air-conditioning, with highly working performance..
• ★【EASY TO USE】The car ac recharge kit are designed with 90-degree push & lock coupler with auto shut off. Easy and convenient to use. Come with gauge for easily viewing during use and getting a correct charge.1/2 Thread for American and Europe..
• ★【DIMENSION】1/2’’ female x 1/4’’ SAE male can tap opener, 15’’ recharge hose, 13mm R134A low pressure quick coupler, 2.76’’ length gauge...
• ★【SALES SERVICE】The R134A AC Refrigerant Charge Hose has 12 months warranty, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..

Kegco HBK199S-2 Keg Dispenser

• ... brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
• LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
• CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
• STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and conveni....

Kegco KC KTP-4D1 Keg Beer Pump D System, 4", Chrome

YaeBrew KC KTP-4D1 D System Keg Pump, 4 Inch, Silver

• Fitment: System "D" (fit for American Sankey).
• Pump Type and Size: 4" Chrome Plated Metal Pump.
• This is a short stroke pump, pumping quickly.