Best 3d Printer For Automotive Parts

YXPOLYER Super Tough Easy Print Nylon Filament 1.75,3D Printer Engineering Filament,Strong & Tough & Heat Resistant&Corrosion Resistance&Good Abrasion&Good Aging Nylon Filament,1kg Spool,White

  • ... living hinges and other functional parts..
  • ★【Super Tough Easy Print Nylon Filament】YXPOLYER nylon Filament has Good toughness, impact strength is more than 10 times that of ordinary PLA.
  • Corrosion resistance, can withstand most organic solvents.
  • Good abrasion resistance and good aging resistance;Suitable for automotive industry signal lamp bases, fuel dispensers, surface mount devices in the electronics and electrical markets, and household products, etc..
  • ★【Printing conditions】We recommend print the Nylon filament at a Printing temperature of 220℃-280℃, bed temperature of 80-100°C.Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Unique Package】Our packaging is vacuum sealed with semi-aluminum foil bags,which can better isolate air and water molecules.We use a transparent plastic film to adhere to the surface of the box by hot pressing, so that the periphery of our box has a waterproof function!Unique packaging gives our material a double Waterproof protection!.
  • ★ 【Tips】Please make sure your 3d printer filament is no tangle before you use it.Please keep the 3D printer filament in a sealed bag after each print, a....
Check Stock

FYSETC 3D Printer Parts and Accessories Limit Switch Mechanical Switch Module Endstops with 3 Pins 39.4 inch Cable for Ramps RepRap Tev Tornad- 3 Pcs

  • Original Tornad 3D Printer Parts, Optical Endstop switch with 1M Photoelectric Light Control.
  • Endstops for 3D Printer: used for Tev, if you want to in all crealty 3D Printer, CR -10 CR 10S S4 ,S5, please research another item: B07ZCSXNF3.
  • Must 3D Printer Limits: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch.
  • Warm Tips: Generally, the printer DIY system need at least three optical switches.
  • What you get? 3Pcs endstop with connect cables.
Check Stock

Siraya Tech Blu Nylon 3D Printer Resin Nylon-Like Strong and Precise High-Resolution 3D Printing Resin 405nm UV-Curing Rapid Resin for LCD DLP 3D Printer(1kg, Nylon Black)

  • High Toughness - This Blu Nylon 3D printer resin is even tougher than regular Blu. It maintains a good balance between hardness and impact resistance and is an ideal choice for making strong but flexible functional parts. Compared with other resins that are too brittle, this Siraya Tech Blu Nylon resin can withstand accidental drops from time to time without breaking easily..
  • Wide Applications - Blu Nylon 3D printer resin has a strong and precise high resolution, so it is very suitable for use in the production of functional parts, such as brackets, bases, and parts that require handling the load without changing the shape. Siraya Tech Blu Nylon resin is compatible with most LCP and DLP 3D printers..
  • Precise Prints - Blu Nylon black 3D printing resin can be printed accurately, allowing you to print the finest details, and has good fluidity, allowing the model to be printed and cured quickly. The viscosity of this rapid resin is very high, it is recommended to print at 25°C..
  • Precise High Resolution and Surface Finish - Siraya Tech Blu Nylon 3D printer resin has excellent colors, a very smooth surface, and strong and precise high resolution, making your model look great, with precise details..
  • Works Great As Additive - Siraya Tech Blu Nylon Black 3D....
Check Stock

CDMZJJ PLA 3D Printer Filament, 1.75mm 3D Printing Consumables Bundle 1KG/2.2lb, 0.25KG/Spool 4 Colors Pack - Black, Blue, White, Red

  • 4 in 1 Bundle 3D Printer Filament: Comes with 1KG/2.2lb 3D printer filament with 4 most popular colors: blue, black, white, red. 4 spools in one package, packed in vacuum sealed bag, each spool filament net weight is 0.25KG/0.55lb..
  • Dimensional Accuracy & Consistency: PLA 3D Printer Filament, 1.75mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing..
  • Premium PLA Filament: Eco-friendly and low odor, tangle-free, clog-free, bubble-free, melt well and feed smoothly, perfect 3D Printer PLA filament for smooth and stable 3D printing experience, provides excellent surface finish of printed parts..
  • Wide Compatibility: 1.75mm diameter printing filament, works perfectly with diverse 3D printers and 3D printing pens that use 1.75mm filament on the market..
  • 3D Printer PLA Filament Using Tips: Recommended printing temperature: 200?-230?. Recommended printing speed: 50-100mm/s for better printing results..
Check Stock

SUNLU 3D Printer S8 Plus FDM 3D Printer with Big Build Volume 310x310x400mm 3D Printing Size Resume Printing Function Fast Assembly DIY 3D Printers Comes with a Roll of PLA Filament

  • ①【Large Build Volume】SUNLU new FDM 3D printer S8 Plus, 310x310x400mm large printing size printer, do not need to print items in parts, save time....
  • ②【Quick Installation】95% pre-assembled, the printer can be used in a few simple steps after receiving. Disassembly is as simple as assembly,....
  • ③【Double-sided Movable Plate】The SUNLU S8 printer is equipped with a double-sided use glass bed/plate, one side has smooth glass surface, the....
  • ④【Resume Printing Function】Users can pause printing at any time, and resume printing after adjusting the filament. Don't need to be afraid of....
  • ⑤【Upgrade Parts】 Compared with the S8 version(SUNLU S8 3D Printer), S8 PLUS 3D Printer has been improved the Extruder Spring, Swing-Arm,....
Check Stock

Mini 3D Printer for Kids with Removable Magnetic Build Plate 1.75mm Free Test PLA Filament DIY 3D Printers Printing Size 100x100x100mm

  • 3D Printer Gifts for Kids and Beginners: As an entry-level version,our 3D printer is easy to install and operate,which means beginners don’t have to....
  • Quick Assembly & Easy Operating:The mini 3D printer consists of 3 main parts, normally it can be assembled in 5 minutes according to the assembly....
  • Massive Free Printing Models:We have plenty of models and self-slicing software for download,providing you a better printing experince.Please check....
  • Excellent Printing Effect:The mini 3D printer has a printing size of 4"×4"×4" (100*100*100mm), high printing accuracy,fits 1.75mm diameter PLA and....
  • Warranty Service:We provide lifetime warranty coverage.We are ready to provide the awesome 3D printer at a great value and glad to answer your....
Check Stock

PVA Glue Stick 3D Printing, FYSETC 3D Printer Parts 3Pcs Solid Adhesive for 3D Printer Ender 3/ Ender 5/ CR10 / Prus Mini MK52 MK3 Hot Bed Print Filament PLA Glass ABS PETG CPE

  • Wide Compatibility: Work well on all 3D Printer hot bed, including spring steel build plate, aluminum or glass bed, PEI sheet, 3d printer stickers etc..
  • Convenience: Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water..
  • Help in 3d printing: Paste it on hot bed beforce printing, strong adhesion to the hot plate, perfect first layer. It is easier to remove the printing models..
  • High-quality and Long-lasting: last for 100+ average prints, helps 3D print parts adhere to the build plate during printing..
  • Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
Check Stock

Wire Cutter 3D Printer Parts Electrical Wire Cable Cutters Cutting Side Snips Flush Pliers Nipper Hand Tools For 3D Printer

  • 3D Printer Parts Electrical Wire Cable Cutters Cutting Side Snips Flush Pliers Nipper hand tools For 3D Printer.
  • Light weight, thin profile and easy handling insulate grips comfortable for operation..
  • Used in multi functional 3D printer electronic industry repair, jewelry processing, model making and fishing, etc..
Check Stock

YXPOLYER Lightweight high Strength PA6 Carbon(Chopped Carbon Fiber),1.75mm 3D Printer Filament,Nylon6 Engineering 3D Printing Materials,tensile Strength Increased 50%,250g Spool,Black

  • ...ds and functional prototypes,Production parts and tool applications..
  • ★【Features & applications】 Carbonfiber reinforced nylon; High tensile strength(Tensile strength: 58MPa) and rigidity(Flexural modulus: 3593MPa ); Excellent chemical and thermal resistance;Strong layer bonding;Suitable for the automotive industry, sporting goods, aerospace and other fields, such as oil-free bearings, sports equipment and flight equipment, etc..
  • ★【Printing conditions】We recommend print the Nylon-CF15 filament at a Printing temperature of 220℃-280℃, bed temperature of 80-100°C..
  • ★【1.75mm engineering Filament Diameter】Dimensional Accuracy +/- 0.04mm. YXPOLYER filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers..
  • ★【Vacuum packaging】 Complete drying for 24 hours before vacuum packaging, which can effectively protect the filament from moisture. Note points for printing and storage of engineering materials, such as drying before use, it is best to use a closed printer and the recommendation of the bottom plate temperature, and the wire after opening is sealed in time or stored in a dry box, etc..
Check Stock