Best 3 Universal Exhaust Kit 2

Universal 3 Inch Custom Tubing Mandrel Bend Pipe Straight & U-Bend Kit

  • Cut out the middle man and build the perfect automotive exhaust system your project deserves!.
  • Universal kit includes all the necessary 3″ exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
  • 3″ mandrel bent tubing is full size throughout the bend for maximum flow and increased power.
  • Each 3″ smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.
  • Includes 4 each: 45 degree bends, 90 degree bends, 180 degree bends, and 46″ inch straight pipe exhaust lengths.
Check Stock

iPower HIFANXEXHAUST12CTB 12 Inch Variable Shutter Exhaust Fan with Speed Controller and Power Cord Kit, 1620RPM, 1600 CFM, Silver

  • APPLICATIONS This 12 inch shutter/exhaust fan with automatic Shutters can help replace your ac unit by cooling your garage attic greenhouse shop or chicken coop Can easily be added to a window opening or opening in the wall along with a Speed Controller to optimize cooling.
  • Shutter Exhaust Fan 120 Volts 63W 0. 52A 1620RPM 940CFM.
  • Fan Speed Controller iPower Fan Speed Controller will correctly and precisely adjust the speed of your Shutter Exhaust Fan Durable 3-Pole Grounded Plug Construction No Extra Wires to Deal With.
  • Multiple Speed One control switch for 3 Variable Speed settings OFF HIGH MED LOW.
  • Power Cord Kit This Power Cord Kit is easy to install & includes a 3-foot strain relief clamp wire connectors & installation instructions Simplify installation of your Ventilation Fan with this easy to use power cord kit Universal extension cord power kit works..
Check Stock

iPower 12 Inch Variable Shutter Exhaust Fan Aluminum with Speed Controller and Power Cord Kit, 1620RPM, 1600 CFM, 2-Pack, Silver

  • APPLICATIONS This 12 inch shutter/exhaust fan with automatic Shutters can help replace your ac unit by cooling your garage attic greenhouse shop or chicken coop Can easily be added to a window opening or opening in the wall along with a Speed Controller to optimize cooling.
  • Shutter Exhaust Fan 120 Volts 63W 0 52A 1550RPM 1420CFM.
  • Fan Speed Controller iPower Fan Speed Controller will correctly and precisely adjust the speed of your Shutter Exhaust Fan Durable 3-Pole Grounded Plug Construction No Extra Wires to Deal With.
  • Multiple Speed One control switch for 3 Variable Speed settings OFF HIGH MED LOW.
  • Power Cord Kit This Power Cord Kit is easy to install & includes a 3-foot strain relief clamp wire connectors & installation instructions Simplify installation of your Ventilation Fan with this easy to use power cord kit Universal extension cord power kit works. PoRible.
Check Stock

LucaSng Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 7 Outlet Gloss Black Stainless Steel Miter Cut Diesel Smoker Stack Tips 5 ID Inlet 36 Long With Clamps

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 7"OutLet Cut Stack Tips Gross Black.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 7" (177.8mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Fitment: Universal,For Truck, Dodge, Chevy.
  • Installation should depend on the inside diameter and outside size.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tips.
Check Stock

2 51mm 304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit

  • 2-Bolt Exhaust Flange Connection Kit Includes 1 Pcs Flange & 1 Pcs Gasket.
  • Application:Universal fit application for mostly any car..
  • This exhaust flange for high quality and accurate assembly for all your custom exhaust needs..
  • All of our products are 100% same as the photos, what you see is what you get!.
Check Stock

BETTERCLOUD 16PCS 3 76mm 304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit

  • Made In the USA 3.00 inch X Pipe Universal These Are NOT Mandrel Bent.
  • Add an “X” pipe Kit to Create Dual Exhaust.
  • Kit includes Heavy 16 GAGE 3.00 DIA BY 11.00" inch About 55.00 Inches Long Assembled (4) 20.00" Long Pipes + 3.00 inch Header Collectors and Clamps.
  • Exhaust Cross Over X Pipe (Please measure to make sure this fits your Car or Truck) This is not a direct Replacement it is Aftermarket.
Check Stock

VEVOR Pipe Stretcher Kit, Exhaust Pipe Stretcher Kit 1-5/8" to 4-1/4", Exhaust Pipe Expander Kit for Tail Pipe Tube, Exhaust Pipe Expander Tool w/Storing Case, 7 Pcs Pipe Expander, Exhaust Stretcher

  • Exhaust Pipe Stretcher Kit: This pipe stretcher kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters..
  • Wide Expanding Range: The exhaust pipe stretcher kit provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
  • Easy to Operate: You only have to lubricate all parts of the exhaust expander tool, and attach sleeves as needed, and then insert pipe spreader into the pipe, and finally connect to existing drill..
  • Heavy-duty Construction: All collets are made of Aluminum alloy ensuring rugged rigidity over an extended service life. The coated surface of the exhaust pipe expander kit provides rust resistance..
  • Convenient Storage: Blow-molded carrying case included for easy storing and convenie....
Check Stock

2.5'' Mild Steel Custom Exhaust Kit Tubing Mandrel Bend Pipe Straight & U-Bend Universal 8PCS

  • This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls.
  • 16-Gauge Piping Walls Of This Custom Exhaust Kit.
  • 2 X 48" Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
  • Each 2.5" Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
  • WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..
Check Stock

Universal 4 Turbo Dual Smoker Diesel Exhaust Stack T Pipe System with 2Pcs 4 Inlet 8 Outlet Gloss Black Stainless Steel Miter Angle Cut Diesel Smoker Stack Tips

  • Universal 4" Turbo Dual Smoker Diesel Exhaust Stack T Pipe Kit + 4"Inlet 8"OutLet Cut Stack Tips Gross Black.
  • Designed For Chevy/Dodge/Ford Full Size Pickup Truck.
  • Smoke kits:T409 Stainless Steel & Coated Black.
  • Cut Exhaust Stack Tip：Inlet: 4" (101.6mm), Outlet: 8" (203.2mm), Total length: 36" (914.4mm) Gloss Black Finish.
  • Professional installation is highly recommended.
  • Package includes1 Set Smoke kit with 2 Cut Exhaust Stack Tip.
Check Stock