Best 12 Dc Gear Motor

Encoder Metal Gearmotor 12V DC High Speed 130RPM Gear Motor with Encoder for Arduino and 3D Printers

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 540 Pulses Per Revolution: Gear Reduction Ratio: 1/45, Each Loop Output Pulses: 12PPR 45*12=540PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

✔Product type: DC Gear motor with two-channel Hall effect encoder.
✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
✔Single Output 1176 Pulses Per Revolution: Gear Reduction Ratio: 1/98, Each Loop Output Pulses: 12PPR 98*12=1176PPR.
✔Wiring Diagram: Red - Motor power terminal (+).
✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..

This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
【Specification:】 Product Name : Synchronous Motor； Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction :....
【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.

Traxxas 58034-1 - Slash XL-5 Brushed 1/10 2WD SCT RTR, w/ iD Battery, Pink.
Features: Titan 12-Turn 550 modified motor XL-5 waterproof electronic speed control Water-sealed receiver box and steering servo Metal gear Magnum 272 transmission Torque-Control slipper clutch 30+mph top speed Adjustable steel turnbuckles with captured rod ends The tires are mounted on satin-finish 2.2" Slash wheels Included optional 23-tooth pinion gear Traxxas 4-amp DC Peak Detecting Fast Charger Traxxas Power Cell NiMH Battery with iDTM Avai.
Includes: (1) Slash Short Course Race Truck (1) TQ 2.4GHz Radio System (1) ESC,(1) Body (1) Motor (1) 7-Cell 3000mAh NiMH Battery (1) 4-Amp DC iD Car Charger Illustrated Instruction Manual Decals.
Specs: Vehicle Dimensions: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Wheelbase: 13.2" (335mm) Ground Clearance: 3.5" (89mm) Weight: 76.2oz (2.16kg) Body Dimensions: Length: 21.3" (542mm) Width: 11.4" (289mm) Height: 5.3" (135mm) Height: 5.3" (135mm).
Part number(s) included (in factory packaging): 58034-1.

This is a TYC-40 AC 12V 5RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Speed: 5RPM； Shaft Diameter: 4.5mm ； Shaft Length: 46mm； Shaft Screw....
【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
【Attention:】 The applicable voltage of this motor is AC 12V, USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
【Package Content:】1PC x Synchronous Motor.

Motor Size: 25mm x 70mm/ 0.98in x 2.77in(D*L).
Wheel Size: 65mm x 26mm/ 2.56in x 1.03in(D*T).
Great replacement for self-balancing smart robot..
This kit is made for beginners to teach them about programming, electronics and robotics..
Package Content:1 x DC Gear Motor , 1 x Wheel , 1 x Bracket, several installation parts..

Traxxas 36054-1 - Stampede XL-5 1/10 2WD Monster Truck & iD Battery RTR, Blue.
Features: Chassis: Fiber Composite Tub .08" (2mm) Thick, Gray in Color. Drive: Rear Wheel, Motor 550 Size Traxxas Titan 12 Turn, Fan Cooled. Radio: Traxxas TQ Two Channel 2.4GHz with Steering/Throttle Trim/Reverse, Throttle Neutral Adjust and High Torque Waterproof Steering Servo, Water Tight Receiver Box with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.

【Specification】: Stroke: 1.2inch-6.5inch (Adjustable).
Rated Voltage: DC24V. Under the same 24V voltage, the closer to the axis, the greater the pushing force. The maximum pushing force is 7.5kg. The pushing force will be reduced by about half every 1 centimeter of movement outside the axis..
【Aluminum Alloy Material】: The surface has been polished 27 times, the aluminum body efficiently dissipated the DC motor heat, it can make the motor stays cool to the touch even under load..
【TORQUE】: When the Rocker Arm is Closest to the Axis AND voltage is 24V, the maximum pushing force can reach 15 lbs. However, with the decrease of voltage and the Rocker Arm is Far Away from Axis, the Torque will be smaller.The minimum torque is 3.2 lbs..
【Stroke Adjustable】: The stroke can be adjusted by changing the position of the screw on the slide rail. The stroke of this product can be adjusted according to the needs of users..
【Metal Gear Reduction Box】: All metal gear, you could use gear grease in the gear reduction box. In this way, the friction will be reduced and the machine will work more smoothly..