Best Z Wave Dimmer No Neutral

GE 12729 Z-Wave Wireless Lighting Control Smart Dimmer Toggle Switch, White

"ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)..
Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
The dimmer allows you to wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day..
Easily replace any standard in-wall switch with the GE Z-Wave controlled dimmer switch to turn lighting On/Off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes..
Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included).

... outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
300W LED/CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..

VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings,....
VERSATILE DIMMING OPTIONS – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF, adjust lighting....
3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches –....
FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer....
EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Full-range....

Replaces standard switch to add local and wireless control.
Compatible with most common residential lighting loads including LED, CFL, INC, MLV, ELV, HAL.
Single pole and 3-Way control: Use with Z-Wave Plus Accessory dimmer RF9642-Z.
Features 7 step blue load indicating LED light that can be dimmed in ON or OFF state.
Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
Voice and app-based control when used with compatible Z-Wave controller.

SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with direct connection to power and neutral (check your boxes before buying)..
FASTER INSTALLATION: The new model is just 1.16" deep so it will fit a shallow or crowded box much easier! It takes half the time to install the S2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution. Intuitive wiring diagrams are printed in the manual (look for more on the Zooz website) and if you need custom instructions, just ask!.
MORE FEATURES: Double tap to go from off to full brightness (single tap to last brightness level - now fully programmable if your hub supports advanced settings). NEW multi-color LED indicator with adjustable brightness level, night light mode, and many more features to customize the dimmer (if you have access to advanced features from your hub)..
LATEST SECURITY: Equipped with the new S2 authenticated security protocol and SmartStart for instant and safe pairing. Z-Wave Plus and ETL certified for communication and safety standards compliance. Lifetim....

...place any standard in-wall switch with the GE Z-Wave controlled dimmer switch to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway..
Screw terminal installation provides improved space efficiency when replacing existing switches compared to flying leads. Neutral connection required for installation..

... outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wallplate not included. Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
300W LED, CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..

ABOUT: In-wall smart dimmer switch that works w/ SmartThings, Wink, Vera / VeraPlus, Hubitat & more.
NEXT GEN FEATURES: Unlimited RGB LED notifications, scene controller, & remote energy monitoring.
NO NEUTRAL REQUIRED: Switch works without a neutral -- Please see listing pictures for limitations.
COMPATIBILITY: Must use a Z-Wave Compatible HUB (Ring, ISY, HomeSeer, etc) to work with Alexa / Echo.
CERTIFICATIONS: Z-Wave Plus (S2 Enabled w/SmartStart Technology), Underwriters Lab (UL), FCC, IC.

... outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Includes white and light almond cover buttons (wall plate not included). Full-range dim ability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
150W LED/CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..