Best Ydmk 6ansi

40T-Performance E85 Flex Fuel Sensor Mount/Bracket Bypass Module - Robust Mount For FULL FLOW from your E85 Flex Fuel Sensor to Fuel Rails - Solid 6061 Billet - 6AN and 8AN Fittings Included

...ake your own bypass saving you time! Cean look install, with O-rings at all connections for robust leak free operation and no messing with single use crush washers. Keep it simple and avoid the risk of leaky fuel in an engine bay.
Have a V6 or V8? Run it as a splitter with 6AN feed to each rail to get the benefit of full equalized fuel pressure & flow to each rail for maximum performance. 8AN feed and 6AN split can support up to 1000 HP on e85. Compatible with any sensor with tube length 95 mm x 9.5 mm diameter incl. GM 13577429 / 13577379, AC Delco 13507128, Continental, VDO & AEM 30-2200 30-2201 sensors.
Solid 6061 Billet Alum construction Includes 6AN & 8AN in/out fittings, 6AN plugs and a 6AN fitting to use the module as a splitter. Includes all special seals and allen keys. You will need to adapt the module to your existing fuel system. DOES NOT INCLUDE SENSOR.
Ships with same day processing when ordered by 3 PM PST / 6 PM EST. Fast & FREE 1 - 3 day priority mail! Limited time new release pricing! Hassle free 1 year warranty against any defects. We encourage questions and are always happy to take care o....

Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
-6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
The barb can use in 3/8" inner diameter fuel hose..
Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..

20Ft Fuel Injection line with 6AN fittings: The package includes 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree) and 3/8 braided fuel line. All the an fittings feature a reusable spin-lock connector.
Universal Application: The AN6 nylon braided fuel hose can be worked with coolant, diesel, oil, hydraulic fluid, pump gas, air, and fuel. This braided fuel line mostly used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, transmission system and oil cooler kit, etc. Easily enough line here to run all the way from your fuel tank to the engine.
Excellent Flexibility and Durability: The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
No Worry To Buy: Excellently Sealed, no leaking. We of....

【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..

Hose ID: 11/32". Hose OD: 0.543inch.Length: 10feet..
Made of CPE synthetic rubber and nylon braided..
Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
Package includes: 6pcs 6an swivel hose ends (2pcs straight, 2pcs 45degree, 2pcs 90degree) and 6an nylon braided fuel line..
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.(Professional installation is highly recommended.).

Hose ID: 11/32". Hose OD: 0.543inch. Length: 10feet..
Made of CPE synthetic rubber and stainless steel braided..
Maximum Working Pressure: 1000psi. Bursting Pressure: 5000psi. Temperature Range: -40℉ to 257℉..
Package includes: 6pcs 6an swivel hose ends (2pcs straight, 2pcs 45degree, 2pcs 90degree) and 6an stainless steel braided fuel line..
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.(Professional installation is highly recommended.).

Please Attention that the 6AN PTFE hose end can be work with PTFE fuel line ONLY..
Thread Size of 6AN PTFE Fitting is 9/16-18UNF and work with PTFE fuel line(Hose ID: 0.31 inch OD: 0.43-0.47 inch)..
The PTFE hose end is reusable, just replace a new ferrule if you reinstall the fitting..
EVIL ENERGY Provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters..
Warrany: EVIL ENERGY provide PTFE hose end 6-month warranty. We value your shopping experience and strive to offer a high-quality product and service..