Best Xfd Makita

Khanka Hard Battery Storage Box Holder Carrying Case Replacement for Makita 12V 18V 40V Battery and Charger - Holds 12V 18V 40V 2.0/2.5/3.0/4.0/5.0/6.0-Ah Battery Charger Case Only

  • Tool battery organizer, designed for 12v/18v/40v battery and charger case, this battery organizer is suitable for makita 12v/18v/40v (BL1021B BL1041B....
  • The hard case is suitable for different sizes of makita battery and contains 9 removable dividers for free DIY storage space inside the hard case,....
  • This hard case replacement for makita batteries 18v lithium ion is made of high quality EVA material, shockproof, dustproof and waterproof, protect....
  • The hard shell can ensure your makita battery is safe and convenient, with light weight. The classic zipper design makes it easy to open and close..
  • Note: Only case is sold, makita battery and charger are not included.
Check Stock

Power Wheels Adapter for Makita 18V battery Dock Power,Makita 18V Dock Power Adapter with 12 Gauge Wire,Good Power Convertor for DIY Ride On Fan Truck Robotics RC Toys and Work Lights

  • Fully Applicable: 100% compatible with Makita 18v, our battery power connector fits your battery perfectly, and you can easily install and lock your....
  • Good Quality: Makita 18v battery dock adapter was made of good ABS plastic. Strong,Heat resistant,impact resistance,moisture resistance..
  • Easy to install: Makita 18V battery adapter can lock your battery well. Just move the power installation connector gently to the inside of the groove,....
  • Creativity & Entertainment: Power Wheel Adapter has installed 12 gauge wire.Enjoy yourself in DIY! Good Power Convertor for DIY Ride On Fan, Truck,....
  • Warning: Work with Makita 18v Li-ion Battery Only.Please check if it fits your battery before buying.Compatible with Makita BL1830 BL1840 BL1850....
Check Stock

Makita 162258-0 Vibration-Proof Side Handle

  • Compatible with Makita Power Tool Models 9031, 9501B, 9503BH, 9505BH, 6000LR, 9558NB, 9558PB, 9557PB, 9553NB, DA3010F, 9523NBH, N9501BZ, 9227CY (NOT Included).
  • Please Reference Tool Diagram to Ensure Part Compatibility.
  • Included: (2) Makita Handle Grips (Model #153489-2)(Part Only - Tools NOT Included).
Check Stock

Makita 161374-5 Replacement Reciprocating Saw Shoe for XRJ05Z

  • Fits the Makita XRJ05 Reciprocating Saw (Not Included).
  • Included: (1) Makita Replacement Reciprocating Saw Shoe (Tool NOT Included).
Check Stock

Makita 2 Pack - 4.5” Turbo Diamond Blades For Grinders & Circular Saws - Ultra-Fast Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Diamond Turbo Blades For FAST Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVI....
Check Stock

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flo....
Check Stock

Podoy Angle Grinder Outer Lock Nut for Compatible with Makita Dewalt Milwaukee Bosch Black & Decker Ryobi 5/8 -11 Fits All 4-1/2 4 Pack

  • For Compatible with Makita:Angle Grinder 9565CV Angle Grinder 9564CV Angle Grinder 9029 Grinder 9069 Angle Grinder 9016DB Angle Grinder 9047L Angle....
  • For Compatible with Makita: 9005BZ Grinder 9015B Grinder 9505BH Grinder 9527PB Grinder 9527NB Angle Grinder 9015DB Angle Grinder 9561CV Angle Grinder....
  • For Compatible with Makita 224399-1, 193465-4, 224568-4 parts. Compatible List is provided below for reference,Outer Nut Size: 5/8"-11，fits all....
  • Package include :4 pcs outer angle grinder flange nuts.
  • Non original aftermarket part,The part/product is not sponsored or endorsed by,or affiliated with the brands it fit,including Makita Dewalt Milwaukee....
Check Stock

Makita 10 Pack - 4 Inch Cut Off Wheels For 4' Grinders - Aggressive Cutting For Metal & Stainless Steel

  • ✅ 10 MAKITA Premium 4” Flat Type 1 Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-Inch x .045-Inch x 5/8-Inch | Optimized for Makita 4 Inch Angle Grinders and compatible with All 4” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, ....
Check Stock

Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Segmented + Turbo Rim Diamond Blades For FAST & RELIABLE Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
  • ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blade....
Check Stock