Best Wtx Clamp Edge Saw Guide

DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50in / 127cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 50” Inch / 127cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area.
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor.
  • 58” x 2.1” x 0.5” inches (147cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp.
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling.
  • Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory.
  • When clamped, this solid guide shows no play and it tightly holds its grip.
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 50 inches/127cm.
Check Stock

Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamps + 50” Extension + Saw Plate

  • Set includes a saw plate, 24-inch and 50-inch clamp edges, and 50-inch extension that can be attached to either clamp edge.
  • Ridged aluminum straight edge guides make straight, accurate track saw like cuts.
  • Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces.
  • Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 (89mm) inches wide.
  • Use the saw guide with your circular saw to cut with unmatched precision, or used for free hand cutting with the plate attached.
Check Stock

Bora 543056K Circular Saw Plate and Straight Edge Guide System . The 50” Clamp Edge and Saw Sled That Allows For Straight, True Cuts

  • EVERYTHING YOU NEED FOR STRAIGHT CUTS – The 50” clamp edge adjusts to firmly clamp to both ends of your board/material, and the saw plate / saw sled easily attaches to your circular saw..
  • WORK TOGETHER FOR PRECISION – The saw guide (with your saw attached) slides right into the fastened clamp edge, and slides along it, ensuring your cuts are straight and true..
  • WORKS WITH ALMOST ANY MAKE/MODEL SAW – Works with most makes and model circular saw, both in right handed and left handed configuration..
  • EASY TO USE – The clamp edge easily attaches and de-attaches, and is made of high quality aluminum. The saw plate easily fastens tightly to your saw (for added versatility, your saw can still be used freehand with the saw plate on as well.).
Check Stock

Bora WTX 50-Inch Ruled Clamp Edge and Jigsaw Guide Set, 545059K

  • Jig saw guide is fully adjustable to accommodate most jig saws.
  • Adjustable pointer guide keeps your cuts true.
  • Clamp Edge includes ruled edge for easy measuring.
  • Easy to change from cutting with the Clamp Edge guide to cutting freehand.
  • Clamp Edge made of heavy-gauge, extruded aluminum for extreme durability.
Check Stock

BORA 50” NGX Clamp Edge Straight Cut Guide for Circular Saws Easy to Use Great for Cross-Cutting Plywood Sheets and Routing Dados 544050

  • Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw.
  • Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
  • Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
  • Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension.
Check Stock

BORA 5-Piece NGX Clamp Edge System Set for Making Precision Cuts Includes 50-inch Clamp Edge 50-inch Extension Pro Saw Plate Track Clamps Non-Chip Strip 544500

  • Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time.
  • 100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension..
  • Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts..
  • Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish.
Check Stock

260mm Track Saw Square Right Angle Circular Saw Guide Rail Angle Stop Compatible with Festool and Makita Guide Rail

  • ...ple installation and removal steps, you can complete the installation in just a few steps, whether you are a professional woodworker or a beginner, electric circular saw track is essential..
  • EASY TO USE: The stainless steel safety buckle of 90 degree right angle guide rail clamp can help you fix the right angle rail, which is fully self-aligning, the contact edge is easy to align with the edge of the workpiece, which can assist you to fasten the right angle guide rail for quick & accurate set the slicing and milling angle.
  • it can meet your most engraving needs with safe operation..
Check Stock

BORA 50 NGX Clamp Edge Extension Straight Cut Guide for Circular Saws | Add 50-Inches to Your NGX Clamp Edge 544060

  • Fits into NGX Clamp edge saw guide to increase length by 50 inches.
  • Made of heavy-gauge, rigid aluminum for extreme durability.
  • Adds 50-inches to your existing NGX clamp edge guide.
Check Stock

30'' Aluminum Clamp and Cut Edge Guide Fixture Clamping Cutting Guide Bar Handle Lock

  • 30'' aluminum clamp and cutting edge guide.
  • Clamp across boards to provide a firm straight edge for accurate circular saw cuts.
  • 3 position cam lock action for strong hold.
Check Stock