Best Wpc Flooring Wpc Decking

Dayton Audio DTA-2.1BT2 100W 2.1 Class D Bluetooth Amplifier with Sub Frequency Adjustment

  • Robust 60 WPC output at 4 ohms, 40 WPC output at 8 ohms.
  • Independent and bus inputs enable unparalleled flexibility.
  • Bridgeable channel outputs provide additional power when needed.
  • Independent channel gain controls allow the output of each speaker to be perfectly matched.
  • Multi-stage protection circuitry for reliability and easy troubleshooting of audio system.
Check Stock

CUTTEREX 13\ Free 360° Vinyl Laminate Floor Cutter for VCT, LVT, SPC, PVC, LVP, WPC, Rubber Floor and Rigid Core Vinyl Plank

  • ✅CUTS WIDE RANGE OF FLOORS: Cuts up to 13" wide on VCT, LVT, PVC, LVP, WPC, Vinyl Plank Flooring, Max. 6mm Cutting Thickness, Adjustable Cutting Blade Height saves operator strength. Cutting Any Unapproved Flooring Materials will be Out of Warranty.
  • ✅OUTSTANDING VALUE: Dust free, Quick, Quiet and Easy Operation. No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, NO Go Out and In House, NO Go Up and Down Staires, Time and Labor Saver..
  • ✅CUTS MMOST SHAPES ON FLOOR: Cuts at Free 360° angles, Straight Cut, "L" Cut, "П" Cut and Lengthwise Cut..
  • ✅STURDY STEEL AND ALUMINUM CONSTRUCTION: Plus Stop Fence and Angle Cutting Gauge..
  • ✅COMPACT DESIGN AND LIGHT WEIGHT: Easy to Carry and Move around..
Check Stock

MANTISTOL 13

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty..
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut.
  • " L & " cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45 Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around..
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service lifeman-made damage is not covered by th....
Check Stock

MantisTol 8.9

  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank SPC or RVP, it is a stone-plastic composite material, which contains stone powder.
  • it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts..
  • " L & " cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45 Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it.
  • 2.2mm thick 9 length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service lifethis is a man-made damage and is not covered by the warranty! Or replace blade..
  • Angle Cutting: 0 - 45 inch 160mm wide plank.
Check Stock

MantisTol 20-inch Pro Flooring Cutter MC-510,For Laminate Carpet tile Siding,Rigid Core Vinyl Plank and more；You are worth buying！

  • For Laminate, fiber-cement siding,MDF, Rubber, Carpet tile, LVT, VCT, LVP, SPC, PVC, WPC tile & plank, Vinyl Flooring and more, up to 510mm (20”)....
  • The max. cutting length: 510 mm (20 "), and max. cutting depth: 16 mm (5/8 ").Angle Cutting: 0-45,it will cut at 45 degrees on a 14 inch plank..
  • A shear blade , included a 600 Grit oilstone to keep sharp..
  • Straight cut and 45 degree angle cut. Clean and Straight cutting edg.（Fingers away from the sharp blade!）. No electricity, no dust, quick, quiet....
Check Stock

MantisTol 13 Heavy duty Vinyl floor cutter LC-330,For WPC,LVT,VCT and Rigid Core Vinyl Plank.

  • Design for cutting LVP, WPC, LVT, VCT,PVC,SPC,Vinyl Plank Flooring. It can't cut Laminate,Engineered floor or other hard plank .So don't try to cut....
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time..
  • " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle....
  • 3mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade....
  • If you find that you need a lot of force during the cutting process, need to repair the sharpness of the blade. Replacement....
Check Stock

2 Pcs EVA Foam Boat Flooring Decking Sheet Self-Adhesive Marine Carpet Yacht Kayak Decking Sheet Non-Skid Surfboard Traction Pad SUP Paddle Board Swimming Pool

  • Premium EVA Foam ----- This boat decking flooring self adhesive pad are made from high quality EVA foam, has advantages of good cushioning, sound & shock absorption, non-skid. It is high tensile elongation, not easy deformation or damage, safe and can be durable for a long time ( Thickness: 6mm eva foam decking sheet).
  • Feature ----- EVA foam boat flooring sheet feature with diamond grooves, can increase friction and play a good anti-skid, also can quickly guide rainwater out if it rains. EVA foam boat decking sheet provide exceptional comfort and traction, whether dry or wet.
  • Easy to Install ----- Boat flooring decking sheet has strong glue at the back, self-adhesive to install boat flooring to the floor surface. It is also can be freely cut to a suitable size, eva foam boat decking flooring fit the different shapes of decks.
  • Wide Application ----- EVA foam boat decking sheet perfect for boat decking flooring, RV flooring, kayak decking, yacht floor, floating dock, golf cart, swimming pool, boat trailer, surfboard, traction pad, motorboat, boat flooring decking, marine deck, car flooring or other place.
Check Stock

WORKPRO 13\ Floor Cutter With Safety Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes on any terrain faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. The 600D polyester fabric with breathable mesh for all-day comfort even in summer.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock

WORKPRO Laminate Floor Cutter With Work Knee Pads

  • Multiple Cutting Materials: This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, bamboo and wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick.
  • Sturdy Aluminum and Sharp Tungsten Steel Blade: ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother.
  • Sturdy Pads: The heavy-duty and non-slip shields are big enough to cover your knees completely, which can protect against cuts or scrapes from the stone, nails, glass shards faithfully.
  • Ergonomic protection: The soft gel core and thick EVA foam padding cushion can provide extra knees support. Helps reduce knee pressure from heavy work on hard floor or concrete.
  • Reinforced Stitching: The excellent stitching process with nylon threads ensures long-lasting durability of shell, gel and foam. The durable knee pads can ensures long-lasting safety of knees.
Check Stock