Best Wort Chiller Plate

NY Brew Supply Copper Wort Chiller Medium

This Immersion Chiller is Designed for 5 Gallon Batches, and Will Cool Your Wort in Minutes, High Quality Brass Garden Hose Fittings Are Attached to....
An Instruction Sheet is Included With Information on How to Use and Care for Your Wort Chiller.

【High Quality】:Stainless Steel 2 micron diffusion stone and parts make it more durable and keep beer fresh taste.
【Aeration and Oxygenation Kit】:1/2'' MPT Homebrew Inline Aeration/Oxygenation Diffusion Stone with barb fitting,full Kit comes ready to assemble to your equipment.
【 Brewing Tools】Oxygenate wort thoroughly to insure a healthy fermentation and carbonate quickly,connects inline with third fitting connected to your oxygen regulator. The oxygen stone will aerate your wort as they flow through..
【Simple Assembly】:1/4" barb inlet for oxygen regulator or air pump connection,1/2" Hose barbs for beer flow,it can connects inline with any Kettle, Pump, or counterflow/plate wort chiller.
【Package Include】:1* Stainless Diffusion stone + 1*Stainless tee fiting + 2*Hose barb Fitting.

- This wort chiller is used for cooling beer or malt..
- Complete disinfection can be achieved after 15 minutes wort boiling..
- This cool the cooked wort quickly. Let the wort reach your preferred temperature for Yeast inoculation ..

Chill your wort like the professionals do!.
A full 18' of contact area for your wort! The tube-within-a-tube design allows for hot wort to flow through the chiller in one direction, while cooling water flows the opposite direction in a cooling jacket surrounding the wort..
Threaded Stainless Steel Fittings for ALL Connections (unlike units from other manufacturers). No Brass Connections and No flimsy tubing clamps required..
Solidly constructed of 304 grade stainless steel with 1/2" NPT Wort Fittings and Male Garden Hose Threaded Water Fittings..
Low Flow Restriction: Gravity feed your wort or use a pump. The choice is yours!.

Perfect for the kitchen homebrewer that is making extract batches. Typically, with extract batches you boil a smaller amount of concentrated wort (1-3 gallons) and then add clean cool water before adding the yeast..
The compact 15' copper immersion chiller is the perfect size for these batches and easily connects to your kitchen sink with a sink adapter (not included)..
Made in the USA (Michigan) from pure 3/8” copper tubing..
Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
6.75" x 3" x 14" (coil diameter x coil height x inlet height).

A 30' wort chiller is the perfect size if you are making full boil extract kits or making smaller all grain batches (3-6 gallons)..
Made in the USA (Michigan) from pure 3/8” copper tubing..
Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
It can easily connect to your kitchen sink with a sink adapter (not included).
9" x 4.25" 18" (coil diameter x coil height x inlet height.

A 60' wort chiller is the perfect size for all grain brewers making 6-11 gallon batches..
Made in the USA (Michigan) from pure 3/8” copper tubing..
Leak free compression barbs keep your immersion chiller from leaking back into your wort during the chilling process..
Vinyl tubing comes assembled with (2) 4’ lengths, or 8 feet total..
The inlet has a standard heavy duty female garden hose fitting, also made in the USA..
It can easily connect to your kitchen sink with a sink adapter (not included).
9" x 9.5" x 20" (coil diameter x coil height x inlet height).

◆ TOP QUALITY -- Made of 316 stainless steel,anti-corrosion, high temperature resistant and durable.
◆ NO BLOCKING -- Millions of tiny pores make it can carbonation beer and soda prior to fermentation quickly,the micron stone is ideal to force carbonate your kegged beer or as an aeration stone prior to fermentation.Not easy to get clogged as long as it's ungreasy.
◆ A MUST HAVE -- A must have for Homebrewers who Carbonate in Kegs Made of stainless steel 316, better than stainless 304. Perfect for carbonation of Beer or Soda..
◆ EASY TO USE--Just connect your oxygen regulator or aeration pump to the stainless steel diffusion stone and aerate your wort as beer flows through the line. Connects inline with any kettle, pump, or counterflow/plate wort chiller.
◆ MONEY BACK GUARANTEE - Your happiness is our priority. As such, if you aren't satisfied with your purchase, contact us within thirty days, and we'll issue you a full refund.

Premium Material--Made of high quality stainless steel, it is durable, wear-resistant, corrosion-resistant and can be used for a long time..
1/4 Brab--The 1/4in barbed inlet can be connected with oxygen regulator or air pump..
2 Micron Aeration Stone--It can be directly connected with any pot, pump or counterflow/plate wort chiller..
Excellent Workmanship--Stable performance, safety and reliability, good sealing and leakproof performance..
Great Choice--Perfect home brewed beer accessories, this set can help you brew authentic beer..