Best Window Regulator Mounting Bracket

Holley Blue Electric Pump W/O Regulator

Brand New Holley 110 GPH Blue Electric Fuel Pump With Regulator (Part #12-802-1).
Features: Tumble polished billet look | Lower housing casting designed for enhanced fuel flow | Motor draws only 3 amps current | Relay kit P/N 12-753 & 7 1/2 amp fuse recommended | Improved design for street/strip applications | Not designed to be used on aircraft of any type | Distinctive Blue logo | Flows 110 GPH (free flow) | Flows 88 GPH at 9 PSI | Maximum pressure is 14 PSI | Includes P/N 12-803 fuel pressure regulator | Provides constant fuel flow with no pulsation.
Has externally accessible pressure relief valve (max 14 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 3 lbs | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended | Not designed or recommended for use with fuel injection systems.
Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 110 | Free Flow LPH: 416 | Fuel System: Carbu....

Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....

Package includes: 6 pieces (3 sets) blind brackets in white, each set has left and right mounting bracket, which can be installed in one blind stand,....
Size information: the low profile box mounting bracket is 2 2/1 inch in width, 1 3/4 inch in height and 1 inch in depth, suitable for headrail that....
Durable material: box mounting brackets are made of iron, durable and sturdy, not easy to break or deform, and can be applied for a long time.
White color: classic, concise and generous, it can match with the curtain of a variety of styles and household adornment.
Application occasions: the low profile box mounting bracket can be installed on the top of the blind frame, the side or the back of the window casing,....

This AN6 fuel filter and regulator adds reliability and reduces cost with -6 AN inlet, outlet, and return fittings built into the assembly.
Designed specifically for LS swaps or EFI conversions that require a reliable and professional fuel system solution.
58 PSI fuel pressure regulator is integrated into the filter and works well with modern fuel injected engines such as LS, Hemi, and more.
Eliminates adapter fittings and includes a mounting bracket with rubber insulator to make installation a breeze.
Five micron fuel filter is built into the assembly to protect your injectors and ensure a long service life.

★【Basic Info】This is a universal Cellular Honeycomb Shades mounting bracket. Compatible with most Cordless Top Down Bottom Up Cellular Honeycomb Shades, Cordless Window Cellular Shades and More..
★【Quality Progress】The improved mounting bracket is thickened to resist fracture. High quality aluminum alloy material, improve the severs life..
★【Inside & Outside Mount / Easy to Install】Use the accessories to install easily. Blinds can be installed inside or outside the window frame, For inside mount, Window deep greater than 1.5.

1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..

PATENTED STEEL CONSTRUCTION DRILL-LESS DESIGN – Our bracket support eliminates drilling into your window sill completely making for an easy, drill free installation..
ADAPTS TO ANY WINDOW STYLE – The AC Bracket works with a wall thickness of 3″ to 12″ and works for window openings that are 27-38 inches wide..
SAFE, DURABLE & CONVENIENT – Dual AC brackets relieves the stress on the window and holds well over 200lbs with simple installation from inside your window..
WORKS WITH ALL BRAND NAME AIR CONDITIONERS – All necessary air conditioner mounting bracket hardware is included & works with all brand name air conditioners..
WINDOW SILL PROTECTION – Sturdy and strong support that will prevent damage to your window sill and wall by removing the pressure and weight of an air conditioning unit..

HEAVY DUTY 1" IN LINE COMPRESSED AIR PRESSURE REGULATOR.
250 PSI MAX INPUT PRESSURE, 225 MAX OUTPUT PRESSURE, WALL MOUNTING BRACKET & GAUGE INCLUDED.
ADJUSTABLE FROM 7 PSI TO 225 PSI, 180 SCFM FLOW RATE.
1" NPT OUTSIDE THREAD DIAMETER IN INCHES 1.315" LINEAR.

Spear Point Window Bar is engineered from 1/2 in. welded tubular steel for strength and added security against forced entry..
Several color matched mounting brackets are available. (Sold Separately) Choose from 3 in. projection brackets, flush-mount brackets and inside window....
Mounting bracket sets includes 3 in. non-reversing safety screws to complete the installation process. Quick Release accessory is required by fire....
Long lasting finish Rust resistant Helps guard against forced entry through windows Decorative scrolls add a beautiful appearance Mounting brackets....