Best Wifi Modules

ixaer Wave Power Inverter Growatt 48V 6kW 120/240V Split Phase Solar Inverter Built-in 80A MPPT Solar Charge Controller

  • ❤️【This is a multifunctional split-phase output grid solar inverter with a MPPT solar charge, a low frequency pure sine wave inverter and a UPS....
  • ❤️【The whole system also need other devices to achieve complete running such as PV modules generator, or utility grid.】.
  • ❤️【The WIFI module (not include) is a plug-and-play monitoring device to be installed on the inverter. With this device, users can monitor the....
  • ❤️【Compatible to mains voltage or generator power. WIFI remote monitoring (optional).】.
  • ❤️【Configurable AC/solar input priority via LCD setting. Overload, short circuit and deep discharge protection.】.
Check Stock

Rain Bird ESP4ME3 Indoor Outdoor 120V Irrigation Controller LNK WiFi Compatible ESPME3

  • Comes with a power cord for quick plug-in indoor or outdoor installations. Cord can be removed to hardwire the internal transformer to a junction box..
  • Comes with 4 zones and expandable to 22 zones with optional modules..
  • Non-volatile memory saves controller settings indefinitely, even after long power outages.
  • WiFi Connectivity by simply plugging in the optional Rain Bird LNK WiFi Module (sold separately), users can access, operate and monitor their irrigation system from anywhere. Internet-based weather information is used to make daily adjustments to the irrigation schedule, saving up to 30% in water..
  • Flow Monitoring Compatible with multiple sizes and makes of optional wired flow sensors (sold separately) for flow monitoring and notifications to save water and protect against property damage..
Check Stock

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

ACEIRMC D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible for Arduino (3pcs)

  • Designed with ultra-low power technology, it offers the full range of performance and features of the ESP32 chip. The pin arrangement provides compatibility with the modules developed for the D1 Mini ESP8266 while also offering fast WLAN, enhanced GPIO, Bluetooth functionality, and with its higher performance, a wider range of applications..
  • MH-ET LIVE D1 mini ESP32 ESP-32 WiFi+Bluetooth Interne.
  • 100% compatible with Arudino IDE, Lua and Micropython, it shows robustness, versatility, and reliability in a wide variety of applications and power scenarios..
  • All I/O pins have interrupt, PWM, I2C and one-wire capability, except the pin DO..
  • D1 Mini NodeMCU ESP32 ESP-WROOM-32 WLAN WiFi Bluetooth IoT Development Board 5V Compatible with Arduino.
Check Stock

Honeywell Lynx Touch L5210 Home Automation/Security Alarm Kit with WiFi and Zwave Module

  • Kit Includes LYNX Touch 5210 Control Panel with Transformer and Battery Backup (3) 5815 Slim Door/Window Transmitters, (1) 5834-4 Four-button Wireless Keyfob & (1) 5800PIR-RES Wireless Motion Detector.
  • Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module (Included) for up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks - Jammed locks reported to Honeywell Total Connect Remote Services 40 devices (lights, switches and lamp modules) 20 scenes 20 rules (event-based actions) 20 schedules (time-based actions) Sunrise/sunset lighting control Randomized lighting control.
  • Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module (Included) for L5210 IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices. Internet Central Station Communication with L5100-WIFI or ILP5 Module.
  • Control Panel Dimensions (approx) 6.1" H x 8.5" W x 1.71" D (15.5cm H x 21.6cm W x 4.4cm D).
  • **PAID MONTHLY SERVICE REQUIRED FOR HONEYWELL'S TOTAL CONNECT REMOTE SERVICES**.
Check Stock

LAUNCH X431 PRO5 Elite,J2534 Reprogramming Tool with CAN/CAFD/DoIP/HD protocols,AutoAuth for FCA SGW OBD2 Scanner Diagnostic Tool,Bidirectional Scan Tool,ECU Coding,50+ Reset,OEM Full Systems Scanner

  • ...Intelligent Diagnostic Tool]: LAUNCH X431 PRO5 obd2 scanner Bluetooth provides Repair Tips, Repair Assist, Component Measurement, TSB, Relevant Cases DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair. [One Scanner For Multiple Uses]: LAUNCH diagnostic tool PRO5 collaborates with add-on modules (ADAS, Videoscope, TSGUN, X-ProG3, WiFi Pinter, Battery Tester) to expand business applications and improve diagnostic accuracy..
  • 【2023 New OE Level Online Functions 】Bidirectional Scan Tool offers you various high-end online functions, which enable you to access the online data to do fast & complicated vehicle repairs, e.g. 1) ECU Coding for replacing, match, relearn, recode new ECU modules.
  • 2) Online Coding for BMW, Audi, VW, Porsche, Benz to surf OEM data.
  • 3) VAG Guided functions ease complex issues.
  • 4) Personalization & ADAS improving car performance and driving safety..
Check Stock

KOOKYE Robot Tank Car Kit Tank Chassis Platform Metal Stainless Steel 2DW Motor for Arduino / Raspberry Pi DIY (Silver Tank Chassis)

  • The KOOKYE robot tank platform is designed for learning robotics electronic car with arduino or raspberry pi programming. You can add robotic arm or robotics HD Camera on this robotic car platform for DIY..
  • The robotic tank car chassis contain extra-large size stainless steel car body and a variety of subplates for DIY. With 1 pairs drving wheels and 5 pairs carrying wheels, it make walk more easily on complex ground conditions..
  • This product only contains tank chassis.If you are an intermediate player and have time to read our code comments,you can buy the robotic car chassis platform andour tank electronic parts kit,then you can easily customize this robotic tank car to make your own project for science fair, college home work or even commercial applications..
  • The tank car chassis kit and the electronic parts kit can be purchase separately for your DIY.The electronic parts kit contains module parts including: Ultrasonic Sensor module, Tracking module, Infrared Remote Control, Bluetooth module and WiFi Expansion board etc. With these modules, the robot car can work in multiple modes such as auto-go, infrared control, obstacle avoidance, line tracking. You can use our Android APP to change working mode through Wifi or Bluetooth..
Check Stock

Magnetic Game Controller Necklaces, Matching Necklace for Couples, Best Friend Necklace, Friendship Necklace (White+Gold)

  • Fully modular professional gamepad .Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
  • New next-generation (NXG) mini-sticks: a longer lifespan, and greater precision.
  • T-MOD technology and Hot Swap feature lets you swap a module with any other — at any point in a game.
  • Extremely high-precision modules and action buttons, with minimal response times.
  • Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
Check Stock

Rain-Bird Controller Indoor Outdoor Lawn Irrigation Sprinkler Timer ESPME3 Controller Only

  • With 4 to 22 stations, the ESP-ME3 provides the station count options customers need. Install the same controller on residential and light commercial....
  • Upgrade the ESP-ME3 to a SMART controller by adding the LNK WiFi module and a WR2 rain sensor. The LNK makes programming and monitoring easy through....
  • Configurable to 22 stations with additional 3 or 6 station modules for different sized jobs or future irrigation needs. Comes with power plug and....
  • Be alerted of system issues including electrical, programming, or high flow (when using a flow sensor) through a red LED and scrolling messages....
  • Large text and symbols make the color-coded dial positions easy to understand. Large 3” back-lit screen is clear to read in dark garages or sheds..
Check Stock