Best Wheel Stud

2pcs 1 inch Hubcentric 5x115 Wheel Spacers (70.3mm bore, 12x1.5 Studs) Compatible with Buick Cadillac CTS DTS Deville Chevy Chevrolet Impala Malibu Monte Carlo Pontiac Grand Am Grand Prix (5x4.53)

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/115 (5/4.53") Bolt Pattern and 70.3mm Centerbore. Compatible with Buick Cascada, Century, LaCrosse, LeSabre, Lucerne, Regal, Riviera. Compatible with Cadillac ATS, CTS, DeVille, Eldorado, ELR, Seville. Compatible with Chevrolet Impala, Malibu, Monte Carlo, Orlando, Venture. Also compatible with Pontiac Grand Am, Grand Prix. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.5 12x1.5mm threads.
  • 2) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 1.0" (25mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 70.3mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.0" (25mm) Wide | Bolt Pattern: 5x115 (5x4.53") | Hub Bore: 70.3mm | Lip Diameter: 70.3mm | Stud/Nut Thread Pitch: 12x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Inclu....
Check Stock

Lisle 22800 Wheel Stud Installer

  • Use with a ratchet or impact wrench to pull the new stud securely in place.
  • Tighten the lug nut against the tool to pull the stud in place.
  • Works on most all automotive and light-duty truck wheel studs, import and domestic.
Check Stock

25mm (1 inch) Hubcentric 5x114.3 Wheel Spacers (64.1mm bore, 12x1.5 Studs) Compatible with Acura Honda ILX RL RSX TLX TSX Integra Type R TL Accord Civic Element S2000 CRZ CR-Z - Black 2pcs

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 64.1mm Centerbore. Compatible with Acura CL, ILX, Integra Type R, NSX (Rear), RDX, RL, RSX, TL, TLX, TSX, MDX. Compatible with Honda 1998-2002 Accord (V6 Engine, 5-Lug), 2003-2021 Accord, 2006-2014 Civic, 2015-2021 Civic (Non Type R), CR-V, CR-Z, Element, HR-V, Odyssey, Pilot, Prelude, S2000 (Rear). Check Year/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.5 12x1.5mm threads.
  • 2) You have 1.0" (25mm) of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 1.0" (25mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 64.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 1.0" (25mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 64.1mm | Lip Diameter: 64.1mm | Stud/Nut Thread Pitch: 12x1.5 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rus....
Check Stock

High Lifter ATV Wheel Spacers (One Pair) 1.5\ 4/156 3/8-24

  • RockTrix Offroad ATV Wheel Spacers - Fits machines with 4/110 Bolt Pattern, a hub lip (center bore) not larger than 74.1mm, and M10x1.25 10x1.25mm wheel studs. Works with various ATV, UTV, Side by Side, Quads. Verify fitment by checking that your machine's bolt pattern, hub, and stud thread size match that of our ATV Wheel Spacers before making your purchase..
  • Your wheel studs MUST be 10x1.25 for these to fit. Compatible with select Bombardier Traxter 500 4WD, Quest 500 4WD. Compatible with Honda Big Red 250, Recon 250, FourTrax 300 350, FourTrax Foreman 350, Rancher 350 400 420 4WD, Foreman Rubicon 500 4WD, Rincon. Compaitble with Suzuki Eiger 400, Ozark 250, King Quad, Vinson 500. Compatible with Yamaha Timberwolf 250, Bear Tracker 250, Big Bear, Bruin, Wolverine, Grizzly, Kodiak, Rhino. Verify Year/Make/Model in Description..
  • [SPECIFICATIONS] Package: Set of Two (2) wheel spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x110 | Hub Center Bore: 74.1mm | Stud/Nut Thread Pitch: 10x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs..
Check Stock

50mm (2 inch) Hubcentric 5x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan Infiniti G35 G37 Q50 Q60 Q70 FX35 FX50 350z 370z Altima Maxima 300zx Sentra - Black 66.2mm 2pcs

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 66.1mm Centerbore. Compatible with Nissan 95-98 240SX (non Base Model), 300ZX, 350Z, 370Z, 02-21 Altima, 89-21 Maxima, 03-19 Murano, 08-21 Rogue, 12-21 Sentra. Compatible with Infiniti FX35 FX45 FX50 G35 G37 I30 I35 J30 M45. Compatible with Infiniti Q45 Q50 Q60 Q70 QX60 QX70. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.25 12x1.25mm threads.
  • 2) You have 2.0" (50mm) of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 2.0" (50mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 66.1mm..
  • [SPECIFICATIONS] Two (2) Wheel Spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 66.1mm | Lip Diameter: 66.1mm | Stud/Nut Thread Pitch: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat trea....
Check Stock

50mm (2 inch) Hubcentric 5x114.3 Wheel Spacers (66.1mm bore, 12x1.25 Studs) Compatible with Nissan Infiniti G35 G37 Q50 Q60 Q70 FX35 FX50 350z 370z Altima Maxima 300zx Sentra - Black 66.2mm 4pcs

  • StanceMagic Hubcentric Wheel Spacers with Lip for vehicles with 5/114.3 (5/4.5") Bolt Pattern and 66.1mm Centerbore. Compatible with Nissan 95-98 240SX (non Base Model), 300ZX, 350Z, 370Z, 02-21 Altima, 89-21 Maxima, 03-19 Murano, 08-21 Rogue, 12-21 Sentra. Compatible with Infiniti FX35 FX45 FX50 G35 G37 I30 I35 J30 M45. Compatible with Infiniti Q45 Q50 Q60 Q70 QX60 QX70. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
  • [VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are M12x1.25 12x1.25mm threads.
  • 2) You have 2.0" (50mm) of space between your fender and your wheel/tire.
  • 3) Your factory wheel studs are shorter than 2.0" (50mm) (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit).
  • 4) Wheel center bore needs to be no smaller than 66.1mm..
  • [SPECIFICATIONS] Four (4) Wheel Spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 5x114.3 (5x4.5") | Hub Bore: 66.1mm | Lip Diameter: 66.1mm | Stud/Nut Thread Pitch: 12x1.25 | [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high qu....
Check Stock

Wheel Accessories Parts Set of 24 Lug Nut Closed End Bulge Acorn Lug Nuts 1.38” Long - Cone Seat - 21mm (13/16”) Hex Wheel Lug Nut (Chrome) (M12x1.25 Thread)

  • For cars with wheel studs requiring a M12x1.25 thread and wheels that take a conical/ cone seat..
  • 1.38” Long 2 Piece Design lug nut The 2-piece design refers to a thin metal cap on the Lug Nut that protects against false torque readings resulting from the wheel stud contacting the inside of lug nut prior to seating with the wheel..
  • Kit includes 24 Chrome Lug Nuts M12x1.25 thread.
  • 2-piece design: lug nuts protect against false torque reading resulting from the wheel stud contacting the inside of the lug nut prior to seating with the wheel..
  • Full money back guarantee. If you are not satisfied with this product or if you have any question, please feel free to contact us. We would like to issue full refund if finally we could not resolve your problem or you are not satisfied with the result..
Check Stock

Lisle 14150 Wheel Stud Pilot Pin Master Set , White

  • Easily remove and install wheels on vehicles with lug bolts..
  • Four pairs of metric threaded wheel stud pilot pins allow you to hang the wheel without having to balance the wheel on the small lip of the hub..
  • This helps prevent the wheel from falling and causing damage or injury..
  • Set includes 2 each of the 12mm x 1. 25, 12mm x 1. 5, 14mm x 1. 25, and 14mm x 1. 5 threaded pins.
Check Stock

UTG Tactical OP Bipod Rubber Feet Center Height 6.1 -7.9 Black

  • High-tech durable aluminum construction and steel top platform.
  • Clever dual mounting - Picatinny Mount and swivel stud mount.
  • Foldable arms with robust external spring tension control.
  • fully adjustable legs with Posi-lock wheel.
Check Stock