Best Wheel Lock Bolt

Front Hub Installer Puller Tool, Axle & Front Wheel Hub Puller, Universal Tools Front Wheel Drive Cars - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub Grappler

  • The axle & front wheel hub puller makes for easy brake and bearing maintenance..
  • The front hub installer puller tool, compatible fit on domestic and import vehicles with independent front wheel suspension.
  • Use on any vehicle with studs that are inside the drum and has a tapered axle and 4-6 lugs..
  • The front wheel hub puller,yoke and bolt are threaded 5/8-inch x 18 inches to best suit most vehicle applications..
  • Use this hub grappler on 4, 5, or 6 bolt stud design and all non-C lock GM axles..
  • Heated pressure screw holds up to tough use. Drive center hole for the wheel studs and are constructed from heat-treated alloy steel that is drop forged for maximum strength and longevity that resists rust and corrosion..
Check Stock

ABN Removable Trailer Wheel Chock – Universal Stopper Cradle Holder for Standard Motorcycle Bike Front Wheels

  • LOAD AND TRANSPORT YOUR BIKE: The ABN | Motorcycle Wheel Chocks Front Motorcycle Stand Wheel Chock 1-Pack is standard-sized to hold the front wheel of any street bike.
  • Motorcycle wheel chocks for trailer floor fits standard front wheels (motorcycles with super-wide front tires or custom low-profile front fenders may not fit this wheel chock).
  • EASY TO USE: Designed with one-person loading in mind.
  • Simply drive or push your bike into the motorcycle front stand to secure your bike in the upright position (use with straps to tie down and support – not included).
  • Takes only minutes to install and seconds to load and unload.
  • MOUNT ON FLAT SURFACE: Mount on wood or metal floor – Mounting plate is held off the floor by the included spacers while the bolt that holds the top to the frame goes in from top with nut and lock washer on the bottom under the mounting plate.
  • Removable by unbolting from your application surface (not quick attachment) – Mounting points allow the motorcycle wheel stand to be removed.
  • 24.5” x 10” x 13” inch (62.2cm x 25.4cm x 33cm) overall and 10-inch (25.4cm) motorcycle front wheel chock length.
  • BUILT TO LAST: Heavy-duty 7-gauge formed steel base plate construction, carbon steel hardware....
Check Stock

ATPTOOL Heavy Duty Fender Rolling Reforming Extending Tool Wheel Arch Roller Flaring Former

  • Efficiently Reforming Tool: You will need the fender roller when upgrading to a larger tire, wheel, or even the addition of fender flares. Increase tire to wing clearance, flare arches or repair wheel arch collision damage..
  • Applicable: This wheel arch roller can lock onto wheel mounts, with elongated holes in the adapter plate to fit all popular 4 and 5 bolt hubs adjusts from 21" to 25.5". It fits most cars and light trucks..
  • Adjustable Arm: The fully adjustable arm allows you to pull or push gradually and allows this fender roller for 180 degrees wheel swivel. Attached hitch pin allows for wide or narrow angle..
  • Easy Operation: Bolts are connected to the hub flange, with elongated holes in the adapter plate. This fender roller uses a small wheel made of nylon to roll back and forth on the wheel arch, flatten the dent parts, and the small wheel is controlled by a handle..
  • Durable: The body is made of iron which possesses of excellent hardness. The handle is galvanized, and the rest is painted in blue..
Check Stock

GDSMOTU 6x5.5 Wheel Spacers 6 Lug for C-h-e-v-y Silverado 1500, 2” 6x139.7 Wheel Spacers 14x1.5 Studs 108mm Fit for Sierra 1500 Express 1500 Tahoe Yukon Avalanche

  • COMPATIBLE VEHICLE - 6x5.5 wheel to 6x5.5 Vehicle Fit for 1999-2014 Sierra 1500 | For 1997-2014 Express 1500 | For 1999-2018 Silverado 1500 | For 1999-2014 Escalade | For 2003-2009 Escalade ESV | For 2002-2013 Escalade EXT | For 2002-2005 Astro | For 2007-2013 Avalanche | For 2002-2006 Avalanche 1500 | For 1988-2000 C2500 | For 1988-1999 K1500 | For 1995-2014 Tahoe | For 2009-2011 Savana 1500 | For 2000-2014 Yukon | For 2000-2014 Yukon XL 1500.
  • SPECIFICATION - Complete Kit 2 Inches Thickness with 6 Lug, 108mm hub center, 14x1.5 Stud Thread Pitch, 6x5.5 Vehicle Bolt Pattern, 6x5.5 Wheel Bolt Pattern. Our store provide 4 Lug/5 Lug/6 Lug/8 Lug types wheel spacer.There must be a suitable vehicle for you because we’re professional auto part store..
  • BUILD QUALITY - When the vehicle is installed with wheel spacers, it will generate a lot of heat and pressure when driving at high speed. In order to ensure the safety of every driver, we use 6061-T6 forged aluminum alloy material. (Generally used in aviation equipment) The bolts installed are of 10.9 grade, which can lock your tires firmly even in drifting and sharp turns..
  • INSTALLATION - It is recommended not to use an impact wrench when you install the wheel spacers, you can screw the bolts by hand or Torque....
Check Stock

VWINDESK 2 inch M8(0.315'' Φ) 15mm Threaded Locking Caster Wheels, Set of 4, Swivel, Polyurethane PU Swivel Ball Casters with 360 Degree Top Plate 220lb Total Capacity, Brake, Used for Standing Desk

  • Includes 4 casters with brakes. Rotate 360 degrees. Smooth & Silent & Sturdy. The total locking brake locks both the wheel and the swivel simultaneously..
  • 150 LB LOAD CAPACITY PER WHEEL. Each caster supports 150 lbs of load (with a 600 lbs. total capacity for all four wheels). All four of the casters have brakes while all four swivel 360-degree pivoting action for smooth wheeling on hard, smooth surfaces such as concrete with very low dragging. Double lock mechanism of both swivel and wheel rotation ensures stability..
  • Plate Size: 2.75" (70mm) x 2" (50mm). Color: Black. Caster axle bolt size: 8mm(diameter) x 15mm(length)..
  • 2" Diameter PU Wheel. Polyurethane (PU) wheels offer the elasticity of rubber wheels combined with the toughness and durability of metal wheels. Safe for all floor types..
  • Wide range of uses: commonly used in both industrial and residential applications such as workbenches, tool carts, tool chest, shopping carts, cabinets, bookshelves, coffee table and other movable furniture, etc... ,it is also perfect matching with vwindesk sit stand standing desk whose bolt needs to be as short as 15mm.
Check Stock

DASBET Fender Roller Reforming Extending Tool, Heavy Duty Wheel Arch Roller Flaring Former for Automobile Maintenance

  • Effective Reforming Tool: This fender roller works on fender from inside wheel well, it can increase the clearance between the tire and the fender to fit larger tires, repair the dent or damage of the fender..
  • Adjustable Arm: Equipped with adjustable arm has second telescoping arm with roller, allows this fender roller for 180 degrees wheel swivel. Attached hitch pin allows for wide or narrow angle..
  • Easy Operation: Bolts are connected to the hub flange, with elongated holes in the adapter plate. This fender roller uses a small wheel made of nylon to roll back and forth on the wheel arch, flatten the dent parts, and the small wheel is controlled by a handle..
  • Sturdy Material: We used treated steel to make this fender roller, the handle is galvanized, and the rest is painted in blue. It is an effective tool for repairing or reforming fender which is sturdy and durable..
  • Wide Applicable: This wheel arch roller can lock onto wheel mounts, with elongated holes in the adapter plate to fit all popular 4 and 5 bolt hubs adjusts from 21" to 25.5". It fits most cars and light trucks..
Check Stock

SCITOO 2X 5x5 to 6x5.5 Wheel Spacers Adapters with 14x1.5 78.1mm 2" 50mm 6 Lug fits for 1992-1999 for Blazer 2006-2010 for Commander

  • 【Pro-Spacer Kit】Wheel Spacer pieces allow more outboard placement of wheels to Increases the track width of your vehicle for an aggressive look that reduces gap between tire and fender, and more improved cornering and greater stability..
  • 【COMPATIABLE VEHICLES】The WHEEL SPACER 2 inch fit for 1992-1999 for Blazer 1979-1986 for K1500.
  • 【2 inch Wheel Spacers 6 lug Kit 】SCITOO wheel spacer adapters will provide a 1.25 offset for factory wheels. The wheel spacer is not intended for wheels wider than 8 or aftermarket wheels with less than 4 of backspacing. Sold in Pairs. Maintains stock bolt pattern, and acts as an offset spacer only - 6x5.5 wheel bolt pattern .(2" thickness,6x5 vehicle bolt pattern,6x5.5 wheel bolt pattern,78.1mm Center bore,14x1.5 Studs).
  • 【STRONG & DURABLE Wheel Spacers Adapters 5x5 to 6x5.5 】Made with hot forged aircraft grade aluminum with strength to weight ratio exceeding steel. Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength.Straight knurled edges for improved grip during install..
  • 【EASY INSTALL】Precision Engineered and Model Specific for Perfect Fit and Wheel Balance . Package contains: 2 pcs 6 lug wheel spacers adapters 2 inch + 12 wheel bolts.
Check Stock

XVRTJ 193406 Wheel Bolts and Lock Nuts Fits Cub Cadet Craftsman Husqvarna Replaces 193406 532193406 137644 184219 532137644 738-3056 938-3056 73930600 (2 Pack)

  • Includes: (2) Deck Wheel Bolts and (2) Lock Nuts as pictured Used on Deck Wheels with 2-1/2" deep hubs..
  • Shoulder on Bolt is 2-5/8" Long, Threads are 3/8"-16, Overall Length of Bolt is 3-5/8..
  • Replaces:MTD Cub Cadet Bolens Troy Bilt White Yard Machine 738-3056, 938-3056..
  • Nut Replaces MTD Cub Cadet Bolens Troy Bilt White Yard Machine 712-04065, 912-0431..
  • Replaces:Craftsman Poulan Husqvarna 137644, 184218 ,193406, 532137644, 532184218,532193406..
Check Stock

VLAOSCHI Black Forged 6x5 6x120 6x127 Wheel Spacers 1/2 Inch (12mm) Compatible with Chevy GMC 6 Lug for 2002-2009 Trailblazer | 2015-2022 Colorado | 2018-2022 Traverse | 2002-2009 Envoy - Pack of 4

  • 【Benefits】These wheel spacers are designed to move the wheel further out from the hub, give your vehicle a more aggressive stance, allow for better handling characteristics & increases driving stability.
  • Mount larger wheel or tires, eliminate wheel/tire rubbing instantly..
  • 【Features】VLAOSCHI wheel spacers are made from FORGED 6061 T6 aerospace aluminum, CNC precisely machined, black anodic oxidation surface treatment..
  • 【Applications】Fit vehicles with 6x5 or 6x120 or 6x127 bolt pattern, compatible with Chevrolet-GMC-Cadillac-Saab-Isuzu 6 Lug for: 2019-2022 Blazer, 2015-2022 Colorado, 2018-2022 Traverse, 2017-2022 Acadia, 2015-2022 Canyon, 2009-2016 SRX, 2017-2022 XT5, 2020-2022 XT6, 2003-2006 SSR, 2002-2009 Trailblazer Envoy, 2003-2008 Ascender, 2005-2009 9-7x and more other 6 Lug vehicles. DO NOT FIT 6x135 6x139.7 Bolt Pattern..
  • 【Specifications】NOT ADAPTER, only widen the wheels, do not change bolt pattern. Pack of 4 Wheel Spacers. Thickness: 1/2" or 12mm | Vehicle Bolt Pattern: 6x5" 6x120mm 6x127mm | Wheel Bolt Pattern: 6x5" 6x120mm 6x127mm | Center Bore: 82.5mm..
Check Stock