Best Wet saw Tiles

TOOLEAGUE Diamond Saw Blade, 4-1/2 inch Super Thin Tile Blade, Diamond Cutting Wheel for Cutting Porcelain Tile Granite Marbles, 10 Pcs

CUTTING DISC SIZE: 115 x 10 x 1.2 x 22.23 mm, thickness: 1.2 mm, outer diameter: 115 mm/4.5 inches..
APPLICATION: Diamond saw blades are specially designed for cutting porcelain, ceramic tiles, granite, sandstone, marble, brick, slate, and cement liners..
HIGH QUALITY: High-quality ceramic tiles require high-quality blades and high-quality cutting blades to provide you with a fast, precise, smooth, and chip-free cutting experience. And it will not harm your tiles, nor will it break..
SPECIAL DESIGN: The new generation of X gear rim design can speed up the cutting speed, ensure longer service life. It can be dry-cut and wet-cut, and the cutting effect is better with water..
APPLICABLE MACHINES: suitable for most tile saws with 7/8" or 5/8" blades, hand-held angle grinders, and hand-held cutters..

Check Stock

SKIL 7-Inch Wet Tile Saw - 3540-02 & QEP 6-7006GLQ 7-Inch Continuous Rim Glass Tile Diamond Blade, 7mm Rim Height, 5/8-Inch Arbor, Wet Cutting, 8730 Max RPM

Product 1: Corrosive resistant stainless steel top supports tiles up to 12 x 12-inch.
Product 1: Adjustable rip fence with miter gauge for accurate straight and miter cuts.
Product 1: Blade cooling water reservoir to keep blade cool while minimizing dust and debris.
Product 1: Bevel cuts tile from 0 to 45 degrees. Cut material: Stone/Masonry.
Product 2: Designed for use with a wet tile saw.
Product 2: For wet cutting at speeds up to 8,730 RPM.
Product 2: 5/8 in. arbor fits most brands of wet tile saws.

Check Stock

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System & QEP 6-7006GLQ 7-Inch Continuous Rim Glass Tile Diamond Blade, 7mm Rim Height, 5/8-Inch Arbor, Wet Cutting, 8730 Max RPM

Hydro lock water containment system keeps water contained near the blade and reduce clean-up time.
Sliding side extension provides support for tiles up to 18 x 18-inch.
Aluminum table top is a durable, rust-resistant surface.
Adjustable rip fence with miter gauge for accurate straight and miter cuts.
For wet cutting at speeds up to 8,730 RPM.
5/8 in. arbor fits most brands of wet tile saws.

Check Stock

Drilax 2 3/4 inch Diamond Drill Bit Hole Saw Ceramic Porcelain Tiles Glass Granite Quartz 2.75 2-3/4 Single Pack

DIAMOND TIPPED HOLE SAW DRILL BIT 2-3/4 inch for drain holes, quartz, shower, faucet, kitchen and bathroom upgrades..
EASY TO USE Diamond Drill Bits. Start at an angle, go vertical, do not apply too much pressure. Keep the tool wet for cooling..
WORKS with STANDARD electric, cordless or upright drill presses. Shank size is 3/8 inch..
DRILL HOLES in glass, porcelain ceramic tiles, plant pots, fish tanks, granite, marble with diamond coated drill bit hole saw..
Tile installation, tiling made easy for Diamond Hole Saw Tools. Shank size is 3/8" - suitable for all standard cordless or drills..

Check Stock

14 in 1 Universal Hand Saw Set Multifunctional Handsaw For Wood Plastic Sawing Glass Ceramic Tile Wood Working Magic Saw

Saw body: equipped with slots for breaking the glass. It can be installed with different saw blades, fits your different sawing demands.
Hacksaw blade: used for sawing metals below 45# steel, such as copper, aluminum, iron, nails etc. It’s widely used in construction, decoration, handicraft processing, advertising, pruning fruit trees and other industries, as well as hiking, fishing, camping, hiking, hunting and other outdoor leisure activities, an essential tool for very family.
Wood flat saw blade: 16cm effective cutting distance, Cutting in straight and curved line. Adjust the cutting direction to upwards downwards and side-wards easily. The versatile saw kit with hacksaw and wood saw blades can be used for general wood, plastic, rubber, glass, bamboo, wire, rope, RV, soft metal, stainless steel, tile, ceramic, stone, wood and PVC pipe etc..
Comfortable ergonomic grip design resists slipping. Sharp serrated hacksaw blade, easy to replace the blades and makes quick work of small cutting tasks. With small hole space for sawing wire, rod, tube, screw and other small materials storage. A perfect saw tool kit for DIY lovers.
Locating centre punch: used for drilling ceramic tiles, floor tiles and wall tiles.

Check Stock

4.5 inch Circular Saw Blade, Firecore Segmented Diamond Saw Blade for Angle Grinder Dry or Wet Concrete Cutting Wheel Disc for Concrete Stone Brick Masonry Tile

SPECIFICATIONS: Firecore concrete saw blade has teeth with soldered diamond segments all around. Diameter: 4-1/2 Inch (115 mm).
Arbor: 7/8 Inch (22.23 mm) with 20 mm Adapter.
Segment Height: 0.276 Inch (7 mm). Suitable for Angle Grinders, Circular Saws, Masonry Saws, Tilesaw and Gas Cutoff Cutters..
FAST & SMOOTH CUTTING: Universal for dry or wet cutting. With Max 12,200 RPM, this diamond circular saw blade are produced specifically for use with general masonry materials such as concrete, roof tiles, stones, bricks and rocks..
INCREASED OPERATING TIME: Concrete blade for angle grinder heats up slower to prolong the operating time..
DURABLE: Made from high-quality superabrasive diamond, this cutting saw blade offers the best combination of cutting speed, long life and a low cost per cut..
WIDE APPLICATION: Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or work at your home studio, this circular saw blade tool is the perfect blade for you..

Check Stock

1 3/4 Inch Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Countertop Glass Bottle Single Pack Tile Drill Bit 1-3/4 inch

1-3/4 inch Diamond Hole Saw Drill Bit -Drills Through Quartz, Granite, Porcelain, Ceramics, Tiles, Glass.
Standard 3/8" Shank for Standard Drills - No Special Tools Needed.
Solid Steel Body: Spins True, Cools Better, Lasts Longer.
Drills Through Toughest Materials Wet Use with Water for Cooling.
Diamond Drill Bit Tile Hole Saw Ceramic Porcelain Quartz Granite Glass Fish Tank Kitchen Bathroom Shower Faucet Installation.

Check Stock

Bardland JC-156 Diamond Blade 6” (156mm) - Fast and Smooth Wet and Dry Cutting Circular Saw for GP Construction/Concrete/Roof Tiles/Stone(JC-156 6\/ 1 Packing)

SPECIFICATIONS: Made of premium Metal Components and High Quality Diamond Grits - Diameter - 6" (156mm) / Thickness 0.086"(2.2mm) – For Wet & Dry Cutting - ⅞” Arbor suitable for Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws..
FAST SMOOTH CUTTING – With Max 9000 RPM, these premium general purpose blades are produced specifically for use with construction materials such as concrete, roof tiles, stone and more..
FOR THE PERFECT JOB EVERY TIME - High quality and high performance these circular saw blades perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or for work in your home studio, this is the perfect blade for you..
SPEEDY CUT WITH MINIMAL DUST due to the thin kerf we have used in developing this high-quality diamond masonry blade..
MAIN FEATURES: The product is 6" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..

Check Stock

Bardland HNT-156 Diamond Blade 6” (156mm) - Fast and Smooth Wet and Dry Cutting Circular Saw for GP Construction/Concrete/Roof Tiles/Stone(HNT-156 6\/ 1 Packing)

SPECIFICATIONS: Made of premium Metal Components and High Quality Diamond Grits - Diameter - 6" (156mm) / Thickness 0.086"(2.2mm) – For Wet & Dry Cutting - ⅞” Arbor suitable for Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws..
FAST SMOOTH CUTTING – With Max 9000 RPM, these premium general purpose blades are produced specifically for use with construction materials such as concrete, roof tiles, stone and more..
FOR THE PERFECT JOB EVERY TIME - High quality and high performance these circular saw blades perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or for work in your home studio, this is the perfect blade for you..
SPEEDY CUT WITH MINIMAL DUST due to the thin kerf we have used in developing this high-quality diamond masonry blade..
MAIN FEATURES: The product is 6" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..

Check Stock