Best Welding Work Clamp

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • USA-made 2 AWG heavy duty welding cable (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resis....
Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

KEILEOHO 6 Pack 11 Inches C Clamp Locking Pliers with Swivel Pads Heavy-Duty Locking Pliers Woodworking Clamps Set Adjustable Nickel Plated C Pliers

  • 6 PCS VALUE PACK - This welding clamp tools set includes 6 heavy-duty C-clamps with sizes of 11 inches, all are made of high-quality nickel-plated alloy steel, which makes them durable and robust, and feature wide opening jaws for greater versatility in clamping a variety of shapes..
  • ADJUSTABLE & SWIVEL PADS - Our adjustable wood working locking pliers provide the versatility of standard locking pliers. Simply turn the screw to adjust the grip, which stays adjusted for repetitive use. Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface..
  • PREMIUM MATERIAL - Built with nickel plated alloy steel, these C-clamp locking pliers are designed to be the hardest working tools in your kit. With professional clamping force that won't slip along with forged and hardened alloy steel jaws, our C-clamp welding tools are durable and built to last..
  • TORQUE LOCK DESIGN - Anti-pinch ergonomically designed handles of the C-clamp locking pliers provides comfortable using experience. The contoured handle aids in the torque-lock design, resulting in a secure hold. The hardened wide jaws with better grip force on jobsite material, suitable for wood working, welding and more..
  • WORRY-FREE SHOPPING - Please do not hes....
Check Stock

HOZEON 3 PCS 11 Inch C Clamp Locking Pliers with Swivel Pads Heavy Duty Locking Pliers Woodworking Clamps Set Adjustable Nickel Plated C Pliers for Wood Working Welding Electrician Maintenance

  • PREMIUM HIGH-CARBON STEEL MATERIAL - The welding clamp tools set is made of heat-treated high-quality high-carbon steel material, with high hardness, large torque, strong and tough, stable and reliable. In addition, the product has a nickel-plated coating to prevent rust and corrosion, and has a long service life..
  • ADJUSTABLE SWIVEL PADS AND SAFE TRIGGER RELEASE - The wood working locking pliers come with a swivel pads, which can work on tapered, awkward and delicate objects without damaging the surface of the object. The product is equipped with a trigger release, which can provide quick release to provide maximum locking force and help prevent accidental release..
  • COMFORTABLE HANDLE AND ADJUSTABLE SCREWS - The handle of the C-clamp locking pliers adopt an ergonomic design, is easy to open, has good comfort and control, and can be grasped from any angle to provide better grip. The C-clamp welding tools come with adjustable screws to adjust size and pressure to provide firm clamping force during work..
  • WIDE RANGE OF USES - The C-clamp locking pliers have a wide range of uses. The large opening jaws can fix and clamp objects of various shapes and materials, which are very suitable for wood working, welding, electrician maintenance and so on. In addition,....
Check Stock

Strong Hand Tools CPL45 , Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2″ ~ 4″ (50~100 mm))

  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-use design for the rapid, repeated loading and unloading of work pieces..
  • A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding..
  • Easy-to-Use design for the rapid, repeated loading and unloading of workpieces..
Check Stock

DCT C Clamps for Woodworking Welding Clamps Locking Pliers Set 3-Piece Wood Clamp Set 11in and 6in Swivel Tip

  • ...R PROJECT: Use the DCT | 3-Piece Hand Tools C Clamp Set to grip your project without slippage.
  • This locking C clamp set includes 1 clamp with regular pads and 2 clamps with swivel pads for damage-free automotive work with auto body panels, most home improvement and repair, woodworking wood joints projects, and some welding applications.
  • 3 CLAMPS, 2 SIZES: 11-inch clamp with swivel pad tips for securing medium to large work, approximate 1-inch (2.5cm) maximum opening, 0.9-inch x 1.1-inch (2.3cm x 2.8cm) flat clamp face size.
  • 6-inch clamp with swivel pad tips for small to medium pieces, approximate 0.7-inch (1.7cm) maximum opening, 0.7-inch x 0.8-inch (1.8cm x 2cm) flat clamp face size.
  • 6-inch clamp with regular tips, approximate 1.3-inch (3.2cm) maximum opening, 0.4-inch x 0.3-inch (0.9cm x 0.7cm) rounded clamp face size.
  • BUILT TO LAST: Constructed from nickel-plated carbon steel for maximum strength and longevity.
  • Hex key adjustment screw for adjusting to the correct pressure.
  • Classic guarded trigger release for maximum locking force and keeps pliers locked securely.
  • Unlike other C-type clamps, these C clamp locking pliers are designed with the handle opposite the clamp to allow access to tight spaces.
  • Each wood working clamp comes lightly pre-oiled fo....
Check Stock

WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail

  • Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
  • Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
  • Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
  • Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
  • Including 1pc Single Head Magnetic Welding Ground Clamp.
  • 1pc Double Head Magnetic Welding Ground Clamp.
  • 1pc Copper Tail Welding Stability Clamps..
Check Stock

250Amp MMA Welder, TEWLEN ARC Welding Machine Kit, Portable 110V IGBT Digital Display LCD Hot Start Welder Electric Welder Machine with Electrode Holder,Earth Clamp,Mask,Brush,Welding Rods,Gloves

  • 【Intelligent IGBT Inverter Welder】Arc welder machine adopt advanced IGBT inverter technology, superior arc welding performance,good arc stability, can reduce copper and iron damage, improve the efficiency and reliability of the welder, less spatter, and smooth weld, achieve perfect welding. The welding machine supports the use of 3/32'' -1/8'' (2.5mm-3.2mm)welding rods, suitable for welding various metals such as welding carbon steel,welding mild steel,weld steel, stainless steel and cast iron..
  • 【Safety and Durability Welding】250Amp stick welder features with anti-sticking device, hot start, arc force over protection, and built in fan helps to dissipate heat. It can prevent overheating, overcurrent, and overload, pure copper core cable, makes the current output stable to ensure safe operation. Durable MMA welding machine, stable and reliable, light weight, energy-saving, no electromagnetic noise, and can be widely used for home general repair work and fitment of inside or outside..
  • 【Simple Operation】Electric welding machine with LCD display and full-digital control system makes easy to read and use, novices can use it for practice. Any welding work can be easily started,the current adjustment range is 20A to 250A,it can be adjusted accordin....
Check Stock