Best Welding Machine Components

Handheld Portable Spot Welders Mini Spot Welder Machine with Nickel Sheet 18650 18650 21700 26650 Battery Spot Welder Kit 6 Gears Adjustable

  • Advantages: High Conductivity, Excellent oxidation resistance, Corrosion resistance, Widely used in the field of Battery Welding.
  • Use Steps: 1. Cut the Nickel tape to a suitable Length.
  • 3. Use a spot welding machine for spot welding.
  • Application: Used for 18650 21700 26650 Lithium Battery DIY Battery Pack, Power tools and Electronic components connecting piece..
Check Stock

Amico Professional Welding Machine 200 Amp Stick Arc DC Welder 80% Duty Cycle 100~250V Wide Voltage

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures....
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-200 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock

Amico MIG-130A, 130 Amp MIG/Flux Cored Wire Gasless Welder, 110/230V Dual Voltage Welding Soldering Machine

  • ...switch easily between 110V and 220V. Extending the power cord by 300 feet can also resist power fluctuations and cable attenuation. It is very suitable for difficult operations on construction sites, docks, agricultural sites and relatively remote areas..
  • MIG-130A can achieve perfect welding, and the strength of its components makes it a reliable work tool for professionals and individuals. The package includes a 7-foot power cord, a 10-foot MIG torch assembly, a 10-foot 300-amp ground clamp assembly, and a 230V to 115V power adapter..
  • It has a variety of safety protection functions, such as automatic voltage fluctuation compensation, overheat protection, over-current protection, over-load protection, etc. The 80% duty cycle ensures long-term effective welding. The ergonomic lightweight model design makes the machine very easy to carry, and the fan with automatic temperature control makes the machine run very quietly..
Check Stock

Amico MIG-130A, 130 Amp MIG/Flux Core Wire Welder, 115/230V Dual Voltage IGBT Inverter Welding Soldering Machine

  • ...switch easily between 110V and 220V. Extending the power cord by 300 feet can also resist power fluctuations and cable attenuation. It is very suitable for difficult operations on construction sites, docks, agricultural sites and relatively remote areas..
  • MIG-130A can achieve perfect welding, and the strength of its components makes it a reliable work tool for professionals and individuals. The package includes a 7-foot power cord, a 10-foot MIG torch assembly, a 10-foot 300-amp ground clamp assembly, and a 230V to 115V power adapter..
  • It has a variety of safety protection functions, such as automatic voltage fluctuation compensation, overheat protection, over-current protection, over-load protection, etc. The 80% duty cycle ensures long-term effective welding. The ergonomic lightweight model design makes the machine very easy to carry, and the fan with automatic temperature control makes the machine run very quietly..
Check Stock

Amico ARC-160 Professional 160-Amp Stick Arc Lift-TIG Welding Machine 80% Duty Cycle 100-250V Wide Voltage Welder

  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures....
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

  • 【Specifications】Voltage Supply: 9-12V DC Input.
  • Input Distortion: less than 1% (at 1KHz).
  • 【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
  • 【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
  • 【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
  • Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
  • 【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..
Check Stock

TROOZY × Rilon MIG Welder 135E, Flux Core Welder Machine, 110V IGBT Inverter with Inner Wire Feeder, Portable Gasless Welding kit 100A DC, Yellow

  • ...Closed-loop control of wire feeding speed, guarantees smooth arc start, more stable welding with less spatter.
  • Energy Saving: Reduce power consumption and increase the durability of fan with the smart high-speed cooling system that automatically switches according to component temperature. It also helps keep machine Components clean, reducing machine failure rates.
  • CSA Certification: With overheat, overcurrent, overvoltage, under-voltage protection and trusted CSA certification, also adapts to 15% fluctuation of network voltage and can weld stably at 95~127V, this is a safe, reliable, and human-friendly welder.
  • Portable Design: Smaller body 12.5*5.3*9.4 inch, weighs 11.9lb, with shoulder strap, easy to carry and store. Thanks to the 60KHz efficiency inverter for increasing capacity.
  • Versatile: Applicable to multiple plates of steel, including mild steel, medium carbon steel, and high carbon steel. It’s the best choice for DIY, home repair, metal fabrication, and outdoor work. There’s a ONE-year care plan for your future support.
  • Up To 1/5 inch: The MIG 135E delivers a maximum output of 100 Amps DC, which adapts to welding metals from normally 3/64 to 9/64 inch, peaks at 1/5 inch. Recommend 0.030″ flux core MIG wire, big enough to handle 2 lb rolls o....
Check Stock

AmicoPower MMA-200,200 Amp Stick Arc Lift-TIG DC Inverter Welder,110 and 230V Welding Machine

  • Advanced IGBT inverter technology, excellent Arc stability, hot start, anti-sticking, forces adjust, steeples amperage control, all generators....
  • Automatic compensation for voltage fluctuation, over voltage protection, under voltage protection, over current protection, over load protection..
  • Fan automatic temperature control, intelligent fan control operates when welding commences to cool components and reduce airborne contaminants pulled....
  • This is specially designed welding machine, can use all electrode, with force adjustment function..
  • 110V/230V dual voltage input. All machines tested in the USA and one-year warranty..
Check Stock

Amico MMA-180 Amp Stick ARC DC Inverter Welder Digital Display LCD 110V & 230V Dual Voltage Welding Machine.

  • Advanced IGBT inverter technology, excellent Arc stability, hot start, anti-sticking, forces adjust, steeples amperage control, all generators....
  • Automatic compensation for voltage fluctuation, over voltage protection, under voltage protection, over current protection, over load protection..
  • Fan automatic temperature control, intelligent fan control operates when welding commences to cool components and reduce airborne contaminants pulled....
  • This is specially designed welding machine, can use all electrode, with force adjustment function..
  • 110V/230V dual voltage input. All machines tested in the USA and one-year warranty..
Check Stock