Best Welding Gear Accessory

Pure Nickel Strip- 99.6% Nickel for 18650 Soldering Tab for High Capacity Lithium, Li-Po Battery, NiMh and NiCd Battery Pack Battery and Spot Welding, a U.S. Solid Product (0.2x8x100mm, 100pcs)

  • ✅【High Quality & Multifunctional】：This adjustable spot welding tool is made of aluminum alloy material, with anodic oxidation surface, wear resistant and beautiful, fire-proof and anti-fall. 2mm Thickened pure copper strip and imported MOS tube can save energy and can provides longger service time. The welding machine itself has overcurrent protection, low voltage protection, overvoltage protection, and overtemperature protection. Intelligent output current. Can guarantee safe use..
  • ✅【Quick Input & 9 Gears Adjustable】：This spot welding equipment adopts Type-c interface, 4 hours fully charge under 5V 1A input. Built-in high-rate polymer power cell, the maximum output current is up to 650A, and it can continuously weld thousands of points after being fully charged. 9 gears of output power adjustable, 1gear(lowest) and 9gear(highest)..
  • ✅【With Charging Control Module & Indicator Light】:With output power and remaining power indication, there are two output modes: 1.5s timing trigger output and automatic detect welding pen output. ---This spot welding kits tools has 4 dual-color indicator lights, the power indicator flashes when charging.When all four lights are on, it is fully charged.It will automatically shut-down after 15 minutes of....
Check Stock

WeldingCity MIG Welding Gun Accessory Kit .035 Contact Tip-Gas Nozzle-Gas Diffuser-Nozzle Adapter for Lincoln Magnum 200/250 and Tweco #2 180-250 Amp

  • Premium MIG welding gun accessory kit includes consumable parts of contact tips, gas nozzles, nozzle adapter and gas diffusers for use with Lincoln,....
  • Work with 180-250 Amp MIG welding gun such as Lincoln Magnum 200/250 series, Tweco #2 and other equivalent MIG guns..
  • Content in each accessory kit: Tweco style consumables.
  • 2-pcs slip-on gas nozzles 22-50 (1/2"), 2-pcs gas diffusers 52, 2-pcs nozzle adapter 32 and....
  • For welding wire size: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Please refer to all listed pictures for part compatibility..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

IRONCAT 6141 Kidskin TIG Welding Gloves - Small Kevlar Thread Welding Gloves with 4 in Gold Cuff Straight Thumb

  • Work Safety Gear: TIG welding gloves protect hands during welding jobs Commonly used by welding operators engaged in steel mills.
  • Material Used: the welding safety gloves are made using top grain kidskin that provides optimum dexterity and comfort.
  • Heat Protection: the top grain kidskin gloves feature Kevlar threading that protects the seam from sparks while the extended cuff protects the hand....
  • User Comfort: Kevlar welding gloves are resistant to abrasions and punctures These safety wear gloves have straight thumb design for ensuring a....
  • Specifications: the welding protective gloves are available in Small size and measure 11 375 in long and 4 5 in wide.
Check Stock

Welding Helmet, Breathable Welding Helmet Protection Mask with Lens,for High Welding Operation Temperature

  • WELDING MASK -- cowhide welding mask, auto-darkening welding helmet, welder mask, protective gear for welding and welding, cowhide face protection..
  • DUAL-MIRROR DESIGN -- The inner and outer dual-mirror design, the outer mirror can be turned up, anti-arc, at the same time, the inner mirror is splash-proof, also detachable, and solar goggles can be installed..
  • TRIPLE PROTECTION OF THE FACE -- the outer mirror can prevent arc light, and the cowhide mask can fully heat insulation to avoid stuffiness. At the same time, it can prevent welding slag, cutting slag and other easy eye debris..
  • COMFORTABLE WEARING -- It is equipped with a sponge cushion, which is soft and comfortable, and the lens is easy to remove. At the same time, the velcro adhesive design makes it more convenient to wear and not easy to take off..
  • SIZE NOTICE -- Welding helmet has a diameter of 20cm, a length of 30cm, and a skirt of 39cm. It can basically use all body types. It can be used as a protective tool for electric welding, argon arc welding, grinding, cutting, etc..
Check Stock

NUZAMAS 1 Pair of Welding Gloves 35cm/ 13.7-Inch Length Shoulder Split Cowhide Foam Lined For Mig Tig Welders BBQ Gardening Camping Stove Fireplace

  • Work Safety Gear: TIG welding gloves protect hands during welding jobs Commonly used by welding operators engaged in steel mills.
  • Material Used: the welding safety gloves are made using top grain kidskin that provides optimum dexterity and comfort.
  • Heat Protection: the top grain kidskin gloves feature Kevlar threading that protects the seam from sparks while the extended cuff protects the hand....
  • User Comfort: Kevlar welding gloves are resistant to abrasions and punctures These safety wear gloves have straight thumb design for ensuring a....
  • Specifications: the welding protective gloves are available in Medium size and measure 11 75 in long and 4 75 in wide.
Check Stock

Mini Spot Welding Machine, 9 Gears Adjustable Portable DIY Spot Welder with Quick Release Pen Battery Plate Spot Welding,Mini Spot Weld Machine with Nickel Sheet and Charging Cable

  • 1, 5300mAh 19.61wh 4.2V MAX 550A Mini Spot Welding Machine DIY With Quick Release Pen Nickel Plate 18650 Battery Spot Welder.
  • 2, Fit for: 14650, 17490, 18650, 21700, 26650, 32650 lithium/NI-MH battery.
  • 3, Short press the button until the buzzer rings one time for gear shift.
  • press one time to increase one gear, cycle as 1-6-1.
  • Gear 6 is the most powerful while Gear 1 is the least powerful..
  • 4，Thickened pure copper strip and imported MOS tube can save energy and can provides longger service time..
  • 5，Comes with high rate lithium battery, and it can continuously welding thousands of points on 0.1-0.15mm nickle sheet after being fully charged. Copper pen rod with 10AWG multi-silicone-wire, humanized sleeve for safety use..
Check Stock

Torbollo Quick Release Watch Black Bands 20mm Watch Band Quality Nylon Strap and Heavy Duty Brushed Buckle

  • Ballistic Nylon watch band is a stylish, soft and breathable watch accessory which can be used either in wet or hot weather. It is of good quality and....
  • Two-Piece Military Style Straps: Laser Cut, Ultrasonically Welded, Waterproof and Washable: Laser cut to eliminate fraying.
  • Select Proper Width: Available in 18mm, 20mm, 22mm and 24mm widths to fit thousands of watch models. To determine proper width for your watch, use a....
  • Optimal Length: All widths (18mm, 20mm, 22mm & 24mm) measure approximately 10.5 inches (270mm) in length not including the buckle and fit wrists from....
  • Nylon Watch Strap for Men Quick Release Replacement Compatible for Samsung Galaxy Watch 42mm/Active 2 40mm 44mm/Active 40mm Galaxy Watch Active2/Gear....
Check Stock

Sellstrom Welding Helmet, Flip Front Adaptor, Lift Front Retainer, Durable Nylon, Unisex, Black, S273200

  • DURABLE DESIGN– Sellstrom welding helmet lift Front Retainer features a durable design with passive filter plate.
  • lift front retainer measures 2" x 4.25" and includes 2 small lift-up finger handles for easy lifting.
  • HELMET-COMPATIBLE – Add lift front retainer to welding helmets from Sellstrom, Fiber Metal, Jackson Safety, Hobart, and other top safety gear brands, making this among the most versatile of welding accessories.
  • INCLUDED COMPONENTS – All necessary included for assembly, including (2) screws, polycarbonate cover plate, filter gasket, and back spring.
  • filter that makes this welding helmet auto darkening is sold separately.
  • MADE IN USA – Welding helmet is manufactured in the USA and made of extra durable nylon.
  • SAFETY STANDARDS – Sellstrom ensures the quality and safety of our protective products, and that all items meet or exceed rigorous industry standards.
Check Stock

DEWALT Die Grinder, 1-1/2-Inch (DWE4887)

  • 4.2 amp, 25,000 rpm motor of the die grinder provides high power and speed for all 1-1/2-inch grinding applications.
  • AC/DC capacity pf the electric die grinder works off welding machines and generators for increased productivity and versatility.
  • DEWALT die grinder has a convenient paddle switch with lock-on button for easy gripping.
  • Precision 1/4-inch collet securely holds all proper accessories (1/8-inch reducing sleeve as optional accessory).
  • 4.2 Amp, 25,000 rpm motor provides high power and speed for all 1-1/2" grinding applications.
  • AC/DC capacity works off welding machines and generators.
  • Paddle switch with lock-on button for easy gripping.
  • Precision 1/4" collet securely holds all proper accessories (1/8" reducing sleeve as optional accessory).
Check Stock