Best Welding Copper Pipe Fitting

GIANNEER Disconnect Tongs Tool Push to Connect Fittings Removal Tools Disconnect Clamp Plumbing Tool for 1/2”, 3/4”, 1” Brass Pipe Fittings

1.Versatile Tool: This GIANNEER disconnecting tongs includes 3 sizes of interchangeable teeth(1/2”, 3/4”, 1”). It can remove the push-to-connect pipe fittings, such as copper and pipe in any combination easily and quickly. No extra glue, tape, soldering, pliers required. The disconnect tongs can be reused..
2.Unique Design: The new design of disconnect line tool can reach the pipe perfectly. It brings much convenience to your work..
3.Interchangeable Teeth: Press the button at the top of the removal tool, then insert the replacement piece to complete the switch..
4.How to Use: To use the disconnect tool, simply slide the tongs over the fitting and the pipe, align the clamp with fitting and pipe. Then squeeze the tongs to press the fitting's release collar to remove the pipe from the fitting effortless..
5.Superior Material: This disconnect tongs tool is made of S50C steel, and the surface is oxidized and blackened, which is not easy to rust. In addition, the tongs has been heat treated as a whole, with high hardness. It’s suitable for various operating environment....

Check Stock

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

...ater compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.The puller tool will automatically pull compression nut and ferrule....

Check Stock

Stone Pro, Traverfill Pro Adhesive

Rapidly softens and dissolves the joining surfaces of PVC and CPVC pipe and fittings - an essential first step before application of solvent cement.
Promotes maximum fusion between pipe and fitting during welding.
Specially formulated for wet and/or quick-set applications.
Compatible with all classes and schedules of PVC and CPVC.
Meets SCAQMD Rule 1168/316A, ASTM F656, NSF/ANSI 14, and NSF/ANSI 61 performance specifications.
contributes toward satisfying Indoor Environmental Quality credits for LEED v4.

Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

【Package Includes】1 pcs disconnect tongs tool.
1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..

Check Stock

FORMUFIT Furniture Grade PVC Pipe, 40", 1/2" Size, Black (3-Pack)

FURNITURE GRADE PVC PIPE – Made from ultra-strong, UV-resistant premium furniture grade PVC material. This is an engineered plastic that is designed for outdoor use, weatherability, and can be used in direct sunlight without becoming brittle or shattering..
SOLID, BEAUTIFUL PIPE – Monolithic, solid-wall pipe has the same color inside and out. Unmarked, glossy surface finish gives a clean, professional appearance that makes projects look incredibly professional and properly finished..
UV RESISTANT – Infused with UV inhibitors to allow the pipe to be used in the sun. Will not crack, change color or degrade over time like plumbing-grade PVC pipe..
CONNECT EASILY: Join by solvent welding (standard clear PVC cement) or by press-to-fit. Can also be used with screws between where the pipe and fitting meet to make removable and reusable connections..
PRODUCT SPECIFICATIONS: Fits 1/2” Size PVC fittings. Pipe has an actual outside diameter of 0. 840 in. (13/16 in. ). Average Inside Diameter: 0. 622 in. . Minimum wall thickness: 0. 109 in..

Check Stock

XINGYHENG Hex Brass Female Pipe Fitting Thread Straight Pressure Reducing Valve Connector CGA-320 to CGA-580 - CO2 Reducing Pipe Nut Fittings NPT1/4 Tank to Argon Pressure Regulator

1.Durable material: The pipe fittings are made of brass and are resistant to corrosion, high temperature ductility and low magnetic conductivity., it is solid, durable, stable and reliable, with high hardness.
2.Strict standards: Standardized processing, complete character specifications. The specifications includes brass pipe fitting with 24MM/0.94" Length 1/4 Female G threads..
3.Perfect detail processing: Keep improving, brass plating on the surface, smooth and durable, the mother-child interface is smooth, not easy to fall off, and the detail processing is perfect and beautiful. Hex nut head, regular shape, thick material, perfect arc design, rounded edges, no burrs..
4.Excellent performance: Brass pipe fitting is designed with female thread and hexagonal shape. For connecting Male threaded threaded threaded pipe, Matching threaded screw. good plastic toughness, small connection deformation, reliable force transmission, good fatigue performance, easy to check..
5.Wide application: Copper pipe can be connected to copper, brass, plastic, aluminum and welded steel as fast joints, easy and fast connection. Widely used in Use in plumbing connections, compressed air, hydraulic, gas and other applications, hex nut for easy tightening and loosening..

Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

...e puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fa....

Check Stock

QIRLOEU Vintage Car Decor, Metal Antique Car Model Kit, Large

Pure metal, surface by electroplating technology treatment, full of luster, not easy to corrode..
Creative, the body by iron pipe, screws, nuts, bearings, iron, chain and other parts, through manual welding composition, weapons removable, wheels can be turned..
Totally made by hand, manual welding, copper plating, and old treatment making it more age-like, with higher ornamental and collection value..
Personalized decorative ornaments, which can be used in homes, restaurants, cafes, parties, offices, bars, bookcases, or as a gift for adults..

Check Stock

SharkBite UC256LFA10 3/4

ELBOWS: SharkBite fitting 3/4 inch 90 degree Elbow connects PEX Pipe in water distribution and hydronic heating systems..
AFFORDABLE: Low cost solution to connect PEX Pipe Tubing.
COMPATABLE PRODUCT: Use with SharkBite PEX Clamp tool and stainless steel clamp rings, or PEX Crimp tool and copper rings. The SharkBite connection system is perfect for your next commercial or homeowner plumbing project..
LEAD FREE: All SharkBite brass fittings are made of Lead Free DZR brass for a durable fitting that is also corrosion resistant.
QUALITY: Only SharkBites quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection.

Check Stock