Best Welding Angle Clamps

Corner Clamps, 90 Degree Right Angle Clamps, 4PCS Woodworking Clamp Tools with Adjustable Swing Corner, Corner Clip Fixer for Carpenter, Welding, Drilling, Making Cabinets, Photo Framing

ACCURATELY SET FOR EVERY RIGHT ANGLE: Whether for carpenting, wood-working, welding, photo framing or DIY use, these 90 degree corner clamps are absolutely useful tools. This compact clamps with its versatility allows to use it for framing, doweling, drilling, preparing cabinet, furniture installing, etc. In addition, right angle clip can also be used to make miter joints as well (can be use for wood 3/4 inch or less).
TWO ANGLES, IN ONE'S ELEMENT: Not only for 90 degree angles, but also for 45 degree saws. For boards with a thickness of different, suitable for fixing 0.2''-0.9'' board. Saves time & effort with the great angle clamps locator, strong enough but not too tight, even women can also easily use it as crafting projects and DIY with one hand ( wood not included ).
A GOOD LIFE IS NOT THAT EXPENSIVE: Attempting to build your own ideas in furniture! Stainless Steel Spring and adjustable jaw construction make our right clamps built to last for a smooth, effortless and accurate set every time. High durability and well-built design are conveyed to ensure long-lasting use. If you want to during a special day with someone, it’s also a great tool to do some wooden DIY projects with your lovers.
A SET OF 4 ANGLE CLIPS: These four corner clips will be a....

Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

[Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
[Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
[Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 8 clamps for larger projects, then joint weld between them.
[Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
[Contents] Welding accessories set includes 8 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

Check Stock

Right Angle Clamp ,90 Degree Corner Clamp with Adjustable Double Handle Corner Clamp for Woodworking the Working of Framing Drilling Welding Doweling Making Cabinet Installing Furniture

HIGH QUALITY: The Right Angle Clamps is made of strong aluminum alloy materials, will not rust or crack , and can easily drill diagonal holes to make the joint perfect. At the same time, this fixture can create flush, angular shapes. angle clamp connector suitable for woodworking the working of framing drilling welding doweling making cabinet installing furniture.
CONVENIENT AND FAST: Drill inclined quickly and easily to hide the screws in the wooden furniture. 90° drilling angle to ensure accurate screw connection, please note: the max thickness for this angle clamps can fix up to 2.3inches (58mm).
EASY TO USE: It works smoothly and has no burrs, and its easy to drill Right Angle to hide screws in wooden furniture, which helps improve work efficiency.
Portable & CARRY: Weight 0.34kg small size can be held by one hand, DIY woodworking tools and can realize precise screw connection.
CUSTOMER SERVICE:If you have any problem or question of our product, please contact us via e-mail , our Customer Service will respond within 24 hours.

Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

Butt Welding Clamps includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.

Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.
Package Included: Welding accessories set includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.

Check Stock

Housolution Right Angle Clamp, Single Handle 90° Aluminum Alloy Corner Clamp, Right Angle Clip Clamp Tool Woodworking Photo Frame Vise Holder with Adjustable Swing Jaw - Silver Gray

...starting woodworking or home repairs and crafting..
※Wide Application:This angle clamps kit is designed not only for wooden DIY project（square boxes, drawers, cabinets, frames, furniture cabinets,）, but also for all solid material such as metal/steel, glass, plastic. perfect for aligning, nailing, woodworking, welding, screwing, making cabinets, box, and picture frames，assemble bookshelves..
※Single-Hand Operation:The second hand is kept free for the workpiece, Fast and simple fixing of boards and frames at an angle degree,like assembling shelves,small cupboards or frames.Saving labor time and reduce workload..
※Customer Service：Package includes Set of 4pcs Angle Clamps and 3pcs 60 degree 90 degree 120 degree clip . We are responsible for our products and customers. If you have any problems with our product, please contact with us first, we will solve it for you within 24 hours.

Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.

Check Stock

2 Set of NUZAMAS 90 Degree Corner Clamp Right Angle Clamp Aluminum Alloy Made Adjustable Swing Jaw Corner Clamp Woodworking Vice Wood Metal Welding Gussets Single Handle

Set of 2 90 Degree Corner Right Angle Clamps: Single handle, swing jaw, jaw rotation adjustable, with the thread wound all the way back, the maximum....
Made of aluminum alloy die-casting, built to last, ideal for woodworking, engineering and welding or other related DIY projects.
Slots in base plate so you can fix the vice to a work bench or machine table..
Right angle corner vice, cast alloy body, steel thread..
Clever double pivot design allows clamping of equal or different sized workpieces at a right angle..

Check Stock