Best Welded Steel Pipes And

DynoMax 39510 Stainless Steel Exhaust System

COMPATIBILITY -- Designed for Jeep Wrangler JK.
see product information for compatibility and engine specs.
PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.

Check Stock

LINACAO 1/2/3Pcs Tools Free Copper Union Fitting with Sweat Solder Joint to Male Threaded Connects Compatible with Use Nominal Size Pipes (Size : 1)

This hex nipple fitting Compatible with connecting two threaded pipes with same diameters, and it has a hexagonal head Compatible with an increased bearing surface when adjusting the fitting with a wrench..
This fitting is made of Brass Compatible with corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Brass can be connected to copper, Brass, plastic, aluminum, and welded steel..
Can be used to connect various pipes, such as air Stone, fuel Stone, water Stone, etc..

Check Stock

ZOEYES 4 PCS Stainless Steel Exhaust Elbow, 2.5”Mandrel Bend Elbow - Thickness 16GA/.065”Wall, SS304 Stainless Elbow for Car Modified Exhaust Elbow Pipe, Stair Handrail, 90 Degree

Parameter - 2.5”Exhaust pipe 90 degree elbow.
Diameter: 2.5inch, Bend Degree: 90º, Wall Thickness: 16GA/.065”, Back arc length: 6inch (These elbow exhaust pipes can be welded to 2.5”OD tube).
Sturdy & Durable - Our 2.5”elbow exhaust pipe made of premium SS 304 stainless steel, smooth edge and mirror polishing.
Not easily damage, anti-rust, anti-oxidation 2.5 exhaust pipe.
Easy to Install - Laser cut end make the pipe ready to weld and easy to use, the elbow exhaust will save your time and energy.
Wide Application - These universal exhaust pipes are suitable replacement for your car modification, stair handrail welding, or complete own custom DIY exhaust system.
Package List - You will get valued 4 pieces of 90 bend elbow pipes.
No pollution: healthy, environmentally friendly, non-toxic and non-polluting.

Check Stock

Savage Metal - Rustic Industrial Edison Steampunk Lamp with Switch - Vintage Antique Home Decor - Ideal for Bedrooms, Living Rooms, Bedside Tables, Nightstand, Desks - Accent Lighting

Industrial Decor: Our unique, industrial, rustic designed lamps are the perfect decorative compliment to any living room, bedroom, office, desk, nursery room, kitchen, cafe, bar, shop, balcony, dining room or even in an entryway..
Quality Craftsmanship: Our beautifully welded heavy-duty industrial metal Edison Lamps are welded on recycled automotive transmission gears..
Materials & Measurements: Handmade in America, this item is created with authentic, reclaimed steel gears, gas pipes and 3/16'' welded round bars. Includes cloth and toggle switch on base. Dimensions are 5 x 5 x 15 inches and weighs approximately 9 pounds depending on gear base..
Bulb NOT Included: Savage Metal recommends using an Edison style LED bulb to complete the overall, steampunk, rustic look (Normal socket size, standard E26) (Lamp is not Dimmable)..
Family Owned and Operated: Located in the heart of El Paso, Texas, Savage Metal LLC specializes in the creation of industrial metal decor that is sure to stand out in any living space..

Check Stock

Fel-Pro-MS94602 Exhaust Manifold Gasket Set

【FITMENT】Compatible with 92-00 Honda Civic Coupe/Sedan.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth....
【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on....

Check Stock

Rustark 55Pcs Spring Band Type Action Fuel Line Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamps Fasteners Assortment Kit (5 x 7mm 8mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm 17mm)

Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
The band of stainless steel t-bolt clamps are 0.6mm thick, and 19mm width rounded edge, which won’t damage the hose or pipes..
T-Bolt Clamp effective range: 45 millimeter-105 millimeter can adjustable (1.75 inch-3.75 inch)..
Superior welded construction, Floating bridge liner..
Note: If used this t-bolt hose clamps for industrial and military hose or pipes, please measure the outside diameter of them before purchase..

Check Stock

JzNova 14\ Heavy Duty Metal Plant Stand with Wheels, Square Iron Plant Caddy on Wheels - Outdoor Flower Pot Rack on Rollers - Indoor Dolly Holder Rolling Tray Coaster, Fully Assembled, Black

● DESIGN & APPLICATION - Square Heavy Duty Metal Plant Stand with wheels, welded from high quality square steel pipes, very sturdy and stable. Suitable for multi-shapes of plant pots or bucket. This plant caddy dolly holder can be widely used indoor and outdoor for moving garden pots, heavy plants, large potted trees, large vases, whiskey barrels or heavy trash cans, it can also hold heavy printers, kitchen mixers, mixing bowls, salt lamps, and crystals..
● SIZE & LOAD BEARING - 14"L x 3.15"H x 14"W, please measure the diameter of the bottom of your flowerpot before you buy it. Actually, it also suitable for 15"-18" plant pots, because the diagonal length of plant stand is 19". The distance between the bottom of the plant caddy and the ground is 2.2 inch. The diameter of the PVC wheel is 1.5 inch. The plant stand dolly is strong enough to hold up to 350 Lbs (160 KG) plant pots or bucket..
● 360° DURABLE INDUSTRIAL WHEELS DESIGN - 360 degree rotating wheels make your work easily and efficient, plant dolly or plant tray with wheels can be freely moved on house floor, even on the carpet, soil ground and lawn without damage on your floor, and the wheels do not get stuck or locked up. 2-way brakes on thick heavy duty wheels to hold containerized plan....

Check Stock

DNA MOTORING CBE-ARSX-NS-BT Stainless Steel Cat Back Exhaust System [Compatible with 02-06 Acura RSX DC5 Non Type-S]

【FITMENT】Compatible with 02-06 Acura RSX DC5 Non Type-S.
【Quality Construction】Made of high quality steel with computerized mandrel-bends for strength and durability.TIG welded CNC machine for resistance against pressure and corrosion.. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】Inlet / Outlet Diameter: 2.5" OD / 2.5" OD.
4" Double Walled Round Diagonal Cut Polished Muffler.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

DNA MOTORING CBE-HC06EX-BT Catback Exhaust System [for 06-11 Honda Civic EX/LX/DX]

COMPATIBILITY -- Designed for Jeep Wrangler JK.
see product information for compatibility and engine specs.
PERFORMANCE UPGRADE -- Enhance your vehicle’s exhaust system with this kit that can give a 14HP and 12-Lb. Ft. torque improvement.
COMPLETE SOLUTION -- Includes DynoMax Super Turbo muffler, 3-in. stainless-steel tips and clamps.
EASY TO INSTALL -- Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn’t require specialized fabrication and/or welding.
IMPROVED FLOW CAPACITY -- Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power.

Check Stock