Best Welded Steel Machine

DNA MOTORING CBE-ARSX-NS-BT Stainless Steel Cat Back Exhaust System [Compatible with 02-06 Acura RSX DC5 Non Type-S]

  • 【FITMENT】Compatible with 02-06 Acura RSX DC5 Non Type-S.
  • 【Quality Construction】Made of high quality steel with computerized mandrel-bends for strength and durability.TIG welded CNC machine for resistance against pressure and corrosion.. TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Muffler & Diameter】Inlet / Outlet Diameter: 2.5" OD / 2.5" OD.
  • 4" Double Walled Round Diagonal Cut Polished Muffler.
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

VEVOR Rack Ratchet, 1000 LBS Load Capacity Tube Mount Ratchet, 9' Length Tie Down Straps Pipe Steel Mounting Frame, Compatible with Most Rack, 2 Pack (1-1/2 Inch Wide Strap, Black)

  • Effortless Installation: The ladder rack ratchet can be either bolted or welded. It is complete with bolt mounting hardware. 1-1/2 Inch Square Pipe Steel..
  • Thoughtful Design: The rubber pad reduces friction between the machine and the ladder rack ratchet strap, which reduces damage to the machine surface. Widen the diameter of the handwheel to save more effort, tighten forward and lock backward..
  • Ratchet Tie Down: The strap adopts a smooth ratchet structure, which is used for one-way drive and is commonly used in manual winches to prevent reversal. The ladder rack ratchet is made of alloy steel with a 1,000 lbs capacity for high durability..
  • 9" Polyester Strap: The ladder rack tie-down straps are equipped with an extended ribbon to increase cargo the loading range of cargo volume. The length of the strap is similar to that of the same product. Strap length: 9 ft / 274 cm..
  • Wide Application: Ladder tie-down straps are used for ladder racks and truck racks. Perfect for tying down cargo and lumber. The frame can be welded or bolted onto the rack. It is suitable for a variety of mounting styles, ideal for almost any rack..
Check Stock

#120 Aluminum Oxide - 8 LBS - Fine Sand Blasting Abrasive Media for Blasting Cabinet or Blasting Guns.

  • IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
  • STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
  • GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
  • QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
  • RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
Check Stock

Sand Blaster Abrasive Blaster Portable Power Sand Blasting Kit for Removing Paint, Stain, Rust, Compatible Pressure Sand Blaster (Blue)

  • IDEAL SURFACE TREATMENT: The pressure sandblasting can perfectly handle the surface of large workpiece, suitable for the high density surface treatment requirements.operating pressure can be achieved 125 psi.
  • STURDY WELDED STEEL TANK: Sturdy welded steel tank, highly efficient and durable. the powder coating can resist rust and corrosion, this sand blaster is unlikely to be deformed and damaged，98 " long hose with check valve，more flexible.
  • GAS-WATER SEPARATOR: Gas-water separator can keep the drying of sandblasting in the barrel and meet higher requirements of sandblasting,Since wet sand tends to clog,our sand blaster can make sure the the compressed air stays dry to prevent clogging.
  • QUICKLY REMOVE: Pressutized design 30% more sandblasting power than siphon units ,this sand blaster is designed for outdoor large jobs, can remove rust from outdoor iron frames, statues and other immovable objects, remove car paint and marble inscriptions, etc.
  • RUBBER WHEEL AND HANDLE DESIGN: Equipped with handle is bending Angle in line with human comfort design and two 6" rubber wheels that allow easy movement of the machine while working.
Check Stock

Little Giant WX-3660-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 60\ x 36\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

Little Giant WX-4284-34 Welded Steel Workbench, 1 Lower Shelf, 15,000 lb. Load Capacity, 34\ x 84\ x 42\

  • Welded steel workbench with gray powder coat finish and 15,000 lb. total load capacity.
  • 7 gauge steel top with 3" x 1-1/2" support frame made of structural C channel for strength.
  • 12 gauge steel lower shelf with 500 lb. load capacity for storing items.
  • Legs made of 3" C channel and welded to the top with 7-gauge gussets for strength.
  • 4-1/2" clearance between floor and lower shelf to accommodate forklift fork.
  • 7 Gauge Steel Top Supported by a frame of 3" x 1-1/2" Structural C Channel.
Check Stock

32 x 30 Stainless Washing Machine Drip Pan

  • Manufactured from heavy duty 20 GA stainless steel.
  • 1/2″ hemmed edges for strength and support.
  • Compatible with many major washing machine brands including Samsung, LG, Whirlpool, GE, Frigidaire, Maytag, and more.
Check Stock

27" x 25" Compact Washing Machine Drip Pan (Stainless Steel)

  • Manufactured from heavy duty 20 GA stainless steel.
  • Compatible with major compact washing machine brands including GE, Electrolux and more.
Check Stock

Caltric Exhaust Muffler Gasket Compatible With Honda Trx450Er Trx-450Er 2006-2008

  • Made of High Quality T304 Stainless Steel Material.
Check Stock