Best Weld Assembly

Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)

  • 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
  • This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
  • This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
  • This weld nut has a narrow body that is well suited for use in confined areas..
  • The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Check Stock

Portable Backhoe Plans DIY Track Hoe Excavator Garden Digger Build Your Own

  • High Quality Steel: The base is a solid piece that is formed so it is stronger and with this design the stress is on the base with the solid  one piece base there is no chance of smashing in your hoe's arm.
  • Powder Coated Surface: Adjusting powder coated surface, our backhoe excavator thumb are able to resist corrosion. Made for longivity, this pro-duty implement is ready for just about any job.
  • 1/2 Inch Thick: Made from heavy duty 1/2" thick steel plates, make sure that this thumb is at least the length of your bucket when measured from boom to the teeth.
  • Bolt-on Design: This backhoe excavator thumb is easy to assemble and weld, each part is plasma cut for tight fit and easy assembly.
  • Easy to Adjust and Fold Away: This easy to assemble DIY backhoe thumb is perfect for anyone that needs a high quality thumb and knows how to weld, simply folds out of the way when not in use.
Check Stock

J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Rotary Welding Positioner, 110V Light Duty Welder Turntable Table Mini 2.5' 3 Jaw Lathe Chuck 10KG (USA Stock)

  • ★【The Main Functions】Light Positioner is mainly used for welding of annular weld. The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding..
  • ★【High-quality DC Motor】High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision..
  • ★【Multifunction】The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
  • ★【High Positioning Accuracy】Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Especially suitable for under 10KG flange, steel pipe and other seam welding..
  • ★【Easy to Operate】Using foot switch control table rotation, easy to control rotation.
  • Light weight, easy to use, handling, easy to operate..
Check Stock

The Woodhaven 3 Foot Firewood Log Rack

  • Easy Assembly. No bolts or tools required..
  • We are proud to say all components of this Woodhaven are made in the USA.
  • Robotic welded ends sections for strong precision arc weld ends..
  • Environmentally friendly powder coat finish..
Check Stock

Walthers Cornerstone Modern Water Tower N

  • Walther Cornerstone Modern Water Tower N Scale.
  • 6 1/2 inches tall by 1 1/4 inch in diameter.
  • Features authentic molded weld lines, service door and piping.
  • Perfect for post 60s layouts. Realistic Decals - assortment for 3 town names.
  • Add realism to your layout. Requires assembly, paint and glue not included..
Check Stock

J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.

  • J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
  • VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
  • Will set in 4-6 hours, and cure in 16-24 hours.
  • Waterproof, petroleum, chemical, and acid resistant when fully cured.
Check Stock

TFCFL Turntable Table, DC24V 20W Rotary Welding Positioner Turntable Table High Positioning Accuracy Suitable for Cutting, Grinding, Assembly, Testing and Other Seam Welding (10KG)

  • √ 【Easy Operation】Structure of precision, light weight, easy to operate, flexible to use. The device can be fixed on the working table or specific tooling for clamping workpiece with manual welding, can also be used with welding operation machine to achieve automatic welding, but also for cutting, grinding, assembly, testing and other processes..
  • √ 【High Accuracy】The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding. Using foot switch control table rotation, easy to control rotation.
  • Clamp and worktable Choose simple mechanical connection way, high positioning accuracy.
  • Anti-electromagnetic design, efficiently reduce high frequency interference on TIG welding..
  • √ 【Rotary Welding Positioner Turntable Table Application】Especially suitable for under 10KG flange, steel pipe and other seam welding. Used for annular welding, cutting, polishing, assembling etc. Support CO2 welding, MIG, MAG, TIG welding etc. Also for cutting, grinding, assembly, testing and other processes..
Check Stock

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock