Best Wear resistant Carbide

Woodys Dooly Carbide Wear Rods - 6in. DY6-6580

Dooly wear bars create four parallel traction lines for dramatically decreased darting and enhanced handling.
Each wear rod features two 7/16in. runners with center carbide.
6in. and 8in. carbide carry 60 degree carbide.
Hardweld at front of wear rod and 1.5in. carbide pad at the back.
Durable 3/8in. - 16 mounting studs ensure secure fit.

Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
Screw on triangle style insert with a chip breake.
10 pieces per box, provides longer tool life than uncoated grades.

Check Stock

5PCS 1/2' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating

Package Included: 5pcs 1/2" carbide square end Mill.
Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..

Check Stock

Diablo D1024X 10-Inch 24-Tooth ATB Ripping Saw Blades Bundle (2-Pack)

...e cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. The thin kerf design requires less cutting power from the user and the saw for better control over the cut. Diablo′s unique design, extra-tough steel plate and proprietary carbide tips deliver longer life — and frames more houses — than other framing blades.
Ideal Usage: For a fast-acting blade that produces clean rip-cuts in a variety of framing material, look no further than the Freud D1024X Diablo 10-Inch Ripping Saw Blade. Ideal for most general-construction applications, this is your go-to blade for slicing through rough framing lumber, high-quality finish lumber, plywood, OSB (oriented strand board), and hardboard siding.
Fits Table Saws: The Diablo D1024X is a great addition to your workshop because it's designed with the versatility to fit a variety of table saws.
Features Shock-Resistant Carbide: The Blade features shock-resistant carbide for long-lasting precision, so you can count on it over the long term, as it is designed for durability. The blade's hardy....

Check Stock

THREE KEYS JEWELRY 8mm Tungsten Rings Silver Punk Seal Gear Mechanical Light Blue Carbon Fiber with Metal Foil Inlay Wedding Bands for Men Size 10

High Quality Tungsten Carbide Steel: Strong hardness and wear resistance, insoluble in water, sulfuric acid. Resists normal day activities.
Ideal Gifts for Love: Idea wedding Band, engagement ring or Promise Fashion Rings for men, women. Best gifts for him, husband, dad, boyfriend & gift....
Comes with Elegant Ring Box. Ideal Gift for Father's Day, Christmas, Birthday, Anniversary, Wedding, Engagement, or Valentine's Day Gift.

Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.

Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..

Check Stock

7 Piece Masonry Drill Bit Set for Tile Brick Cement Concrete Glass Plastic Cinder Block Wood [3/16，1/4，5/16，3/8，1/2 inch ] Chrome Plated with Industrial-Strength Carbide Bit with Storage Box

【Industrial grade material】Made of selected high-quality high-strength alloy steel materials. Compared with ordinary Masonry Drill Bits on the market, it has higher hardness and wear resistance, and has lower cutting resistance. The well-designed high-hardness carbide tip can easily penetrate various materials. Cemented carbide drill bit is used as a material to improve durability..
【Sturdy and durable】 Durable industrial-grade cemented carbide blades and cemented carbide with reinforced heads can prevent the drill from cracking and prolong its service life. Compared with traditional brick drill bits, its strength and sharpness are higher. Anti-rust, smoother drilling and cutting removal, higher hardness and wear resistance. The additional triangular handle can firmly fix the electric drill in the electric drill..
【Wide range of applications】 The tough carbide tip of the pointed design can easily penetrate various materials, and can quickly penetrate and remove debris. Suitable for cement, concrete, ceramic tiles, drill blocks, glass, wood, cinder blocks, travertine, hard plastics, mirrors, etc.! The masonry Drill Bit Set includes 3/16 inch, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch to meet the various requirements of home drilling.

Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

【Complete Wood Turning Chisels Carbide】IRONWALLS carbide tipped wood lathe turning tools set for woodworking includes 1 x 11.2” Interchangeable grip handle, 1 x 10.6” Extension Rod, 4 x 9.6” stainless steel arbor shafts, 2 x round inserts, 2 x square inserts, 2 x diamond inserts, 2 x square circle inserts, 1 x T15 wrench, 1 x L-shape wrench and beautifully packaged in an easy-to-store & carry aluminum box..
【Adjusted Freely for Different Applications】Designed with a small lock on the lathe tool handle and coming with a removable extension rod, you can adjust the length of the shafts and the overall length of the carbide lathe tools woodworking freely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacemen....

Check Stock