Best Waterproof Mini Fuse Holder

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • 【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
  • 【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....
Check Stock

CAMWAY 10PCS Fuse Holder Blade Mini ATM/ATC Waterproof Automotive Wire Fuse Holder 14 AWG for Car Boat RV 12V 20A Fuses

  • [Wire Gauge 】: 14 AWG, added protection to the circuit.
  • [Waterproof 】 : Yes, 10 Pcs Water Resistant Fuse Holder safe and reliable, used in the circuit of automobiles,electric vehicles..
  • [The Wire Fuse Holder 】For 12V, the maximum current can be 30A.The length of the unfolded line is about 30cm.
Check Stock

WMYCONGCONG 20 PCS 14 Gauge Blade Type Mini Size In-line Fuse Holder for Mini ATM APM Blade Fuse Automotive Use

  • Heavy duty in-line fuse holder, ideal for mini blade fuse, for car boat truck auto use, added protection to the circuit..
  • Mini size in-line fuse holder, ideal for ATM blade fuse, come with cover, protects it from dirt and muddy water..
  • 14 AWG wire, easy to automotive installation, cars, boats, motorbikes and trucks..
  • Package included: 20 pcs in-line fuse holder14AWG Wire..
Check Stock

Rockville DWB80W Dual 8\ White 800 Watt Marine Wakeboard Tower Speaker System

  • Package Includes: (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (2) Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the....
Check Stock

(4) Rockville RMSTS80S 8\ 2000 Watt Waterproof Marine Boat Speakers 2-Way Silver

  • Package Includes: (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (2) Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. (1) Rockville RXM-S6 Marine/Boat 6 Channel Amplifier 2600 Watt Peak / 660w Dyno-Certified RMS With Status Mode LED Indicator.
  • Features: Pair Rockville RWB90B Black 8" 300w Marine Wakeboard 360° Swivel Tower Speakers. 8" Two-Way High Fidelity Speaker System. Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel. Includes Stainless Steel Mounting Hardware. 1" Polymide Dome Neodymium Midrange Tweeter.Built-In Two-Way Crossover Network..
  • Fully Marinized Against Salt & Fresh Water Conditions. Completely Water / Rust Resistant. Terminals Are Sealed with Rubber Gaskets. Specially Tuned for PA Voice Over. Polypropylene Mica Injected Cone with Santoprene Surround. High BL Magnet Motor Structure. Y30 High Density Magnets. Oversized 1.25” Kapton Voice Coil..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 ' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the....
Check Stock

4 Gauge Copper Clad Aluminum Complete Amp Wiring Install Kit

  • 1 x 17' 4 Gauge Copper Clad Aluminum RED power cable.
  • 1 x 3' 4 Gauge Copper Clad Aluminum BLACK ground cable.
  • 1 x 20' 16 Gauge Copper Clad Aluminum speaker wire.
Check Stock

Nilight 12 Pack 12V Car Add-a-Circuit Fuse Tap Standard Mini Micro2 and Low Profile Fuse Taps 4 Types ATO ATC ATM APM Fuse Holder for Cars Trucks Boats

  • Dual-slot Fuse Holder: Provides 1 fuse holder to protect existing circuits and a second fuse holder to protect new circuit. Blue flexible socket tail, very easy to connect to any naked wires by only use a vise.
  • Easy to use: plugs into occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.
  • Great compatibility: Automotive and non-automotive use for Cars, Trucks, SUVs, ATVs, UTVs, Campers RVs,Motorcycles,Boats,snowmobiles,and most general DC applications etc,covering such components as radio, light,etc. Use when hardwiring or adding LED strips, dash cams or other electronic devices that require direct wiring into the fuse box.
  • Superior quality: made from high quality materials, good bending performance, melting resistance and excellent electrical conductivity.
  • Package include: 3pcs Standdard fuse tap,3pcs Mini fuse tap,3pcs Micro2 fuse tap,3pcs Low Profile mini fuse tap,12pcs blade fuses..
Check Stock

yueton Pack of 10 AC 15A 125V Black Electrical Panel Mounted Screw Cap Fuse Holder

  • Heavy Duty 10 Gauge Red Color Wire Fuse Holder..
  • Inline Fuse Holder for ATC/ATO Blade Fuse..
  • Waterproof Lid for a Rainy Day, This item is Safe and Reliable..
  • High Quality, Supports 12V Fuse up to 40A..
  • Package Included 6 x Fuse Holder and 6 x 40Amp Fuse..
Check Stock

ZOOKOTO Inline Fuse Holder, 16 AWG Gauge Copper Wire Car Auto Blade Fuse Waterproof with 15 AMP Fuse

  • In-line fuse holder for blade fuses,Water resistant cap,High Quality Product.
  • Damp proof and waterproof ,include 15A Fuse.
  • With 16AWG red insulated wire,rated current: 15A, 32V, DC (6V/12V/24V).
  • With Cap design waterproof your electrical connection using this fuse holder.
  • Access to the fuse is by means of a snap-fit lid on the top of the holder, Implementation of standards: National Standard.
Check Stock