Best Water Stop Valve

3/4\ Water Float Valve, Water Level Control Water Tank Traditional Float Valve Upgrade 2 PCS (3/4 Side Inlet)

  • Small size and easy to install: Estimated rate of flow up to 40 psi 3 gallons per minute  At 60 psi 5 gallons per minute.
  • Automatic refill stop when full：Automatic control, less water from the fill, the water from the stop.
  • Environmentally Friendly: Safe and will not release any toxic substance..
  • Wide Application: Widely used in water boiler machine, rice steaming machine, water tank, water tower, toilet cisterns, etc..
  • Worry-free Purchase：We have confidence in this product, please feel free to contact us whenever it is broken. At the same time, since this product is a valve that can move automatically, regular inspection and maintenance is necessary. Check the front screen and whether the valve is normally started and closed every month..
Check Stock

2pcs Presta Valve Caps, Oil Slick Stem Bolts, TC4 Titanium Alloy Bike Tire Valve Caps, Multicolor Mountain Road Bicycle Bike Valve Caps, Dust Covers for Inner Tube Gas Nozzle Bike Valve caps

  • [ Material ] Presta Valve Adaptors is made of TC4 titanium alloy. TC4 titanium alloy material, Vacuum nitride coating, flowing light and color. The valve cap not only can prevent leakage, but also prevent dirt and rain water into your bicycles..
  • [ Exquisite and Mini ] This gas nozzle valve cap is exquisite with mini size, lightweight and very useful. Removable valve core for easy inflation and addition of sealant. Universal Compatible.Good Airtightness. For Replaces Bad Presta Valve Cores..
  • [ Safe and Reliable ] Dimensional thread rolling, fully match your nozzle. Used to replaced the leak of the old valve make the Tire rejuvenation. Stop air leaks from old valves. Universal Compatible. Good airtightness. More durable, safe and reliable..
  • [ Color ] Colorful. The Bike Presta Valve Caps adopts a color design to make your bicycle look different and enhance the viewing of your bicycle..
  • [ Special Design ] TC4 titanium alloy Bike Presta Valve Adaptors, circular design, smooth and considerate. These Valve Stem Adapters are Suitable for Bicycles, Road Bikes, Folding Bikes and Most Mountain Bikes..
  • [ Exquisite and Mini ] This gas nozzle valve cap is exquisite with mini size, lightweight and very useful. Removable valve core for easy inflation and addition of....
Check Stock

YUHX Refrigerator Water Line Kit - 25 FT Fridge/Ice Maker Installation Kit,1/4 Compression Water Line Splitter Quick Connector Fittings

  • ❶【 Suitable for Potable Drinking Water 】Our ice maker installation kit is BPA free, odorless and tasteless, made by food grade materials, ensure....
  • ❷ Our refrigerator water line kit includes 3/8" or 1/2 - 1/4" tee stop valve and 1/4" 1/4" inline shut-off valve, you can add a branch waterways on....
  • ❸【 Multi-function】Tap into your existing shut-off valve from under kitchen sink for fridge connection , RO system feed ,water filter system feed....
  • ❹【 No Drilling and No Damage to Water Pipes】Our ice maker water line kit can be water line connection from an existing water supply valve &....
  • ❺ 【Easy Installation】The fridge connection kit will work with any Reverse Osmosis RO system or filtration system that uses standard 1/4" tubing,....
Check Stock

IMXMI 3/4\ Tankbuddy Valve PumpBuddy High Flow Large Water Discharge 20mm Float Valve Double Water Level and Adjustable Water Level (TB20)

  • 1.The TANKBUDDY VALVE is patented product, It is ideal for water tanks which are filled by running water or a pressure system controlled by water pump. The valve gives a level difference which is adjustable from 50mm up to 2.5m to minimise starting and stopping of running water or the pump system(Level difference accept Customization)..
  • 2.APPLICATION：water tank、water tower、water pool、Irrigation、 animaldrinking、Sprayequipment、swimmingpool etc..
  • 3.WORK PRINCIPLE：It fits easily through a thin walled tank or screws into a threaded tank inlet.As the tank empties,the float travels down the cord until it hits the level topper.The valve then opens immediately to give a full flow.As we discharge te water, the valve now runs constantly and the float rises until it hits the level adjuster. This lifts the arm and the valve shuts down..
  • 4.ADVANTAGE：High flow, Start and stop levels can be easily adjusted to give water level differentials from 50mm to 2.5 m, Keeps pump operation to a minimum, Valve Seal Access System for quick access to valve seal, Ideal for all makes and models of tanks, Available inlet sizes..
  • 5.Instruction is included in the package. You can install and use it according to the instruction. If you have any after-sales questions, ple....
Check Stock

IMXMI 1" Tankbuddy Valve PumpBuddy High Flow Large Water Discharge 25mm Float Valve Double Water Level and Adjustable Water Level (TB25)

  • 1.The TANKBUDDY VALVE is patented product, It is ideal for water tanks which are filled by running water or a pressure system controlled by water pump. The valve gives a level difference which is adjustable from 50mm up to 2.5m to minimise starting and stopping of running water or the pump system(Level difference accept Customization)..
  • 2.APPLICATION：water tank、water tower、water pool、Irrigation、 animaldrinking、Sprayequipment、swimmingpool etc..
  • 3.WORK PRINCIPLE：It fits easily through a thin walled tank or screws into a threaded tank inlet.As the tank empties,the float travels down the cord until it hits the level topper.The valve then opens immediately to give a full flow.As we discharge te water, the valve now runs constantly and the float rises until it hits the level adjuster. This lifts the arm and the valve shuts down..
  • 4.ADVANTAGE：High flow, Start and stop levels can be easily adjusted to give water level differentials from 50mm to 2.5 m, Keeps pump operation to a minimum, Valve Seal Access System for quick access to valve seal, Ideal for all makes and models of tanks, Available inlet sizes..
Check Stock

New FloodStop for Dishwasher/Toilet/Water Filter FS 3/8-C v4

  • AC Power Adaptor (or use 4 X AA Batteries as Primary Power Source, not included).
  • The FloodStop valve is connected to the angle stop and supply line.
  • Water/leak sensor is placed at the base of the appliance or fixture (Dishwasher - Toilet - 3/8" Icemaker - etc.).
  • Water on sensor closes FloodStop valve and sounds alarm.
  • Valve stays closed until problem is attended to and system is reset.
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • ...e. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to provided a secure, watertight connection that handles an operat....
Check Stock

2wayz Garden Hose Shut Off Valve. Stop Running Around Your Lawn! No Leak Experience - Tight Seal Ball Valve Hose Fitting. Quick Connect Shutoff Coupling With Smooth Long Knobs (4cm!).

  • STOP GETTING SOAKED, STAY DRY AS A BONE! If you find yourself constantly dropping the hose on the ground and having the water spray in your face, our shut off valve is the perfect item for you! When you are finished with the nozzle, flip the knob, and DROP THE HOSE ALL YOU WANT! You can also use this in conjunction with a hose nozzle, since you can keep the switch off, and easily change or unscrew the nozzle without the water spraying all over you..
  • 1-2-3 INSTALL, OPTIMIZED FOR CONVENIENCE & USABILITY. Easily install the shut off valve by screwing it onto your water hose or spigot with ease! With the TPR rubber coated body, the straight valve is anti-slip, which means you can grip it even with wet hands! Easily turn the LONG 4CM KNOBS (ideal for people with arthritic hands) to turn the water on and off. Unlike other shut off nozzles, ours will never stiffen with age. Smoothest knob turns, or you can ACTIVATE YOUR FULL MONEY BACK GUARANTEE!.
  • RUSTPROOF, NO LEAKS. The 2wayz straight shutoff valve was designed with the highest quality in mind. With a solid and tight valve, it is designed to never leak or drip. NO RUSTING! Unlike some other models which will rust in a few months, our valve is made out of a combination of strategically place....
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock