Best Water Removal Pump

Manual Bilge Pump for Boats Kayak Canoe Hand Water Pump | Hand Pumps Siphon Pump Bailer Kayaking Boat with Hose Portable Held 20 Gallons Per Minute Suction Marine Grade Regular

  • LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
  • NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
  • LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
  • EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock

Shoreline Marine Bilge Pump with Float Switch, 800 GPH

  • The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump.
  • The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off.
  • The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH.
  • The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose.
  • It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade.
Check Stock

Wayne 57729-WYNP WAPC250 Pool Cover Pump, Blue

  • ...-1/8” for the pump to turn on, prime, and operate. Water levels less than 2-1/8” won’t activate the iSwitch to start the pump, so manual activation will be needed.
  • Efficient Design - Energy efficient, high flow, oil-free pump. Easy on/off allows you to plug in and leave the pump unattended for worry-free water removal all winter long. Automatic freeze protection within the iSwitch technology helps prevent pump damage.
  • Additional Features - The strainer base filters out debris to minimize clogging and keeps the pump from tipping over. 25-foot power cord and 25-foot "pull-to-shore" rope included to help position the pump on the pool cover. Includes a 3/4" garden hose adapter and check valve to reduce repetitive cycling.
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient, performance. This Auto Off pump will NOT run dry.
  • Auto On activates when water at, or above 2 1/8 in. has been detected. Auto Off activates when water at, or below 3/4 in. has been detected..
Check Stock

OEMTOOLS 27171 Adjustable Fan Clutch Holding Tool, Fan Clutch Removal Tool, Fan Clutch Puller, OEM Fan Clutch Tool, Fan Clutch Pulley, Fan Clutch Set

  • SPEED UP YOUR REPAIRS: Add the fan clutch holding tool to your fan clutch removal tool kit to quicken your repair process.
  • Designed to hold fan clutch with less work.
  • ADJUSTABLE JAW: The clutch fan removal tool features adjustable jaws that fit most water pump pulley bolt patterns, including pressed-on pulleys.
  • Jaws on the universal fan clutch removal tool lock in place, securing water pump bolts.
  • EXTRA LEVERAGE: The longer, high-visibility red handle on the fan clutch removal tool provides leverage for extra torque, helping to eliminate physical strain.
  • ELIMINATE NEED FOR MORE TOOLS: The clutch fan tool for your fan clutch removal kit is way more effective than trying to use a pry bar or wrench to hold the fan clutch.
  • MORE THAN ONE PULLEY: The fan clutch holder for your clutch fan tool kit also holds the camshaft pulley when replacing cam belt.
  • The OEM fan clutch removal tool is versatile.
Check Stock

Aquascape Pond and Water Cleanout Pump, 45033

  • Make pond cleanouts and installation wash-downs quick and easy with the Aquascape Cleanout Pump.
  • Specially designed bottom intake allows the pump to draw water down to one-fourth inch from the bottom of the feature, ensuring effective removal of water every time.
  • Solids-handling pump has the capability of pumping up to 4,200 gallons per hour, saving you time with every use.
  • Essential piece of equipment for any water garden contractor or DIY water feature owner.
Check Stock

Wayne EEAUP250 1/4 HP Reinforced Thermoplastic Submersible Multi-Use Pump, 1, Black

  • Hands-Free Water Removal: WAYNE model EEAUP250 has iSwitch technology, which activates the pump once the water level is above 1-3/4 inch and automatically turns off when the water drops to below 1/2 inch.
  • Automatic Pumping: Water level must be at least 1-3/4 inch for the pump to turn on, prime, and operate.
  • water levels less than 1-3/4 inch won’t activate the iSwitch to start the pump, so manual activation will be needed.
  • Efficient Design: Reinforced and sealed submersible design.
  • once activated, the pump removes water down to 1/2” on the surface.
  • Additional Features: Able to handle flat areas like basements, driveways, etc. as well as tight spaces such as window wells and fish tanks.
  • Quality You Deserve: Proudly assembled in the USA for quality you can trust.
  • since the iSwitch turns off the pump when the water is below 1/2 inch there is no need to unplug it.
Check Stock

Little Giant Select Series LG-S50T 115-Volt, 1/2 HP, 4300 GPH Cast Iron Sump Pump with Tethered Switch, Blue, 14942675

  • APPLICATIONS: This automatic, heavy duty, cast iron sump pump with tethered switch is ideal for use in residential sump systems or emergency water removal applications.
  • AUTOMATIC PUMP: activates when water reaches 12 to 14 inches, shuts off when water drops to 4 to 6 inches.
  • piggy-back design allows switch to be overridden for emergency water removal or testing.
  • BUILT TO LAST: rugged cast iron volute, housing, motor cover and non-clog type impeller is capable of passing 3/8-inch diameter semi-solids.
  • also features a carbon/ceramic shaft seal.
  • ENERGY-EFFICIENT MOTOR: Permanent Split Capacitor (PSC) motor, 115 Volts, 5.3 Amps, 507 Watts, 60 Hz., thermally protected.
  • PUMP SPECIFICATIONS: 1.5-inch FNPT discharge, 10-ft. power cord, 4300 GPM at 0-ft. lift.
  • 5.5 inches x 8.0 inches x 10.5 inches high.
Check Stock

Green Expert 1/4HP Submersible Sump Pump 2500GPH Max Flow Manual Automatic On Off Adjustable Float Switch 25-Foot Power Cord Easy Use Household Drain Pump to Empty Pools Hot Tub Flooded House Garden

  • 【Efficient Water Removal Pump】Oil-free PSC motor with thermal overload protection produces 1/4HP output power for increased reliability and longer motor life. Pump has the ability to lift water up to Max. 20 feet of vertical height.
  • Removes water up to 2500 gallons per hour at zero feet, 31 gallons per minute at 10 ft of discharge lift..
  • 【2 in 1! Manual/Automatic Adjustable】This utility water pump can be adjustable usage mode between manual and automatic on/off as you wish. You can use it in automatic on/off operation and just leave it at work, or you can freely choose the simple plug-in operation to remove water completely. With the lock design, floater can be fixed in up status that would keep pump always run, but you have to plug off manually in case of run dry..
  • 【Simple to Install with Hoses】The adapter kits of pump allow you to connect hoses easily: 1”, 1-1/4", 1-1/2" hold discharge hoses for high capacity pumping.
  • 3/4" GHT, 1-1/2" NPT(pump outlet) connect threaded hoses for quickly installation. *This item can NOT be compatible well with expandable hoses that would cause poor flow..
Check Stock

Little Giant VCMA-20ULST, 80 GPH, 230 V In-Pan Condensate Removal Pump w/Safety Switch & Tubing

  • CONDENSATE REMOVAL PUMP: Little Giant Automatic Condensate Pump features 1/2-gallon ABS plastic tank, and 6-foot power cord.
  • AUTOMATIC HVAC PUMP: Ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required.
  • BUILT TO LAST:  stainless steel motor shaft, thermal overload protected motor.
  • CSA certified to US and Canadian standards.
  • Three 1/8-inch diameter inlet openings allows multiple appliances to use on condensate pump.
  • 115 Volts, 1 Amp, 60 Watts, 3/8-inch OD barbed discharge, 65 GPH at 1-foot head, 15-foot shut-off, maximum 6.5 PSI, 3 inlet drain holes, 6-foot cord.
Check Stock