Best Water Pump Guide Vane

Holley 12-170 Elec Pump, 400 Lph

designed for high output naturally aspirated and forced induction efi and carbureted vehicles.
the roller vane design pump provides fuel pressure and volume to support up to 900 efi n/a or 700 efi boosted horsepower.
compatible with flex fuel (e85/e90) and all types of gasoline (100% alcohol fuels may diminish fuel pump life).
the inlet thread is a -8 an female orb (o-ring port fitting) and the discharge is a female -6 an orb (o-ring port fitting).
includes fuel pump, -6 to -8 male an discharge fitting with check valve, terminal nuts & boots, instructions.

009428081 30793053 Vacuum Pump, Carbon commutator, highly wear-resisting.
Low noise, high performance, long service life.
Rotary vane structure avoids piston vacuum pump pressure gradually decline problem.
Working enviroment temperature -40 to 120, working life lasts 500000 times.

PACKAGE INCLUDES - 1* 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump and R134a AC Manifold Gauge Set Kit for HVAC Air Conditioning Refrigeration Recharging ETL Listed.
1* 110V 1/4 HP 3.5 CFM Single Stage Rotary Vane Air Vacuum Pump with Oil Bottle ETL Listed.
HEAVY-DUTY VACUUM PUMP - Made of die-cast aluminum housing and a composite anti-slip rubber base, which is lightweight and durable.
Perfect for those who are looking to self diagnose or recharging AC systems.
It maintains air conditioning systems by efficient removing moisture before refilling the refrigerant.
CONVENIENT TO OPERATE - VIVOHOME air vacuum pump features a simple oil fill port for a clean pour, and the oil window provides you with vital information like oil level and oil quality.
The oil drain valve at the bottom ensures faster and more thorough emptying.
1 bottle of 500ml vacuum oil is also included.
MANIFOLD GAUGE SET - Manifold gauge set is designed specially to measure pressure in refrigeration equipment.
Manifolds are equipped with large viewing glasses for easy viewing of refrigerant flow, and high-quality colorful pressure gauges ensure accurate readings.
WIDELY USED IN VARIOUS SYSTEMS - The intake filter can effectively prevent im....

Carter Fuel Systems universal fit Rotary vane pumps are internally regulated, offer a free flow design with no points to burn out or shaft seals to leak.
High quality pump provides factory specified fuel pressure and flow rate.
OE matched electrical connections and fuel outlet position on pump ease installation.
Installation hardware included for a simple, hassle free, installation.

DEPENDABLE & DURABLE PUMP: Made with durable cast iron construction to withstand rough operating environments, every 4200 series pump includes a limit lifetime warranty..
EASY INSTALLATION: The fuel pump has a removable junction box that rotates 180-degrees for ease of electrical wiring and installation in tight spaces..
PROTECTION AGAINST OVERHEATING: Engineered to exceed the industry’s most stringent safety standards, the pump is constructed with thermal overload protection to prevent the motor from overheating during abnormal usage..
CONSISTENT HIGH PERFORMANCE: 4200 series Fill-Rite pumps are built with Rotary Vane Technology that maintains a consistent flow performance even as components wear from use..
MOBILE APPLICATIONS: Designed for 12V battery powered bung mounted transferring from fuel tanks on trailers or trucks, the 4200 series will pull fuel at tank depths of 8 ft. and discharge fuel up to heights of 37 ft..

...e use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
【Do not pump】Except for engine oil and diesel,do not pump hot oil or when the car engine is running.Car engine must cool complately.Do not pump gas,paraffim,petrol or other inflammable liquids.Do not pump water and it is not suitable for storage or transportation of fuel or other liquids.Do not pump different oils into the same tank. Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running..

【Rotary Vane Vacuum Pump】FavorCOOL single-stage 3.6CFM rotary vane vacuum pump is powered by a 1/4 HP all copper motor to keep your HVAC servicing fast and easy. Its 3.6 cfm flow rate can draw your system down as low as 37.5 microns (5 Pa). Intake Ports: 1/4″Flare. Voltage/Frequency: 110/60HZ. Oil Capacity: 300 ml..
【SAFE & DURABLE】The lightweight cast aluminum structure effectively dissipates the heat generated during operation and resists chemical corrosion to ensure years of beneficial use.
Its innovative design also prevents oil backflow and separates the exhaust from any oil vapors, limiting contamination and providing safer operation..
【HVAC GAUGE READING】The HVAC service gauge set is great for diagnosing and repairing AC systems. Ideal use for R22, R134a and R410a, our charging hoses are made by 100% Virgin Teflon Diaphragms with highest industry standards, fits the high pressure requirements for charging R410A, Working Pressure 800psi, Brust Pressure 4000psi. Much higher and safer than most other products on markets..
【Convenient To Operate】FavorCOOL vacuum pump features a simple oil fill port for a clean pour, and the oil window provides you with vital information like oil level and oil quality.

Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/2 HP, 115V/60Hz thermally protected motor, 6 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4, 3/8, and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.

Robinair's CoolTech 2-stage rotary vane design vacuum pump features the power and capacity needed for a wide range of service applications as well as robust construction for a long service life.
Powerful 1/2 HP, 115V/60Hz thermally protected motor, 4 CFM free air displacement, and factory rated to 15 microns for a fast, thorough evacuation.
Offset rotary vanes build powerful compression within the pumping chamber - reducing pressure and vaporizing moisture.
durable molded polycarbonate base improves pump balance and minimizes vibration.
Iso-Valve isolates pump from system with just a quarter turn.
Gas Ballast design mixes moisture laden air passing through pump with relatively dry air so compression doesn't cause condensation.
1/4 inch and 1/2 inch male flare inlet fittings, easy to read sight glass, easy access oil fill port, and angled oil drain valve for faster, more complete draining of the reservoir.