Best Wall Panel Heaters

Ember Glass Radiant Panel Heater - White - 600W - 35ʺ x 24ʺ - Dual Connection

  • WALL MOUNTED: This 35” x 24” infrared heating panel can be installed vertically or horizontally on your wall and the plug-in (120 VAC) connection makes it very DIY-friendly.
  • HIGH HEAT OUTPUT: This panel heater delivers an impressive heat output of 2,046 BTUs per hour.
  • ENERGY EFFICIENT: It only costs approximately 7.2 cents per hour (based on average national electric costs) to run this electric wall heater.
  • SAFE & STYLISH: This white radiant panel provides a safer, more attractive alternative to traditional gas or propane space heaters.
  • 5-YEAR WARRANTY: Limited 5-year warranty and 24/7 lifetime installation and technical support at 800-875-5285.
Check Stock

Wall Mount Panel Heater -400 Watt Convection Heater Ideal for 50-100 Sq Ft Room，Overheat Protection,for Home Bedroom kitchen Office,120V Electric Heater

  • DECORATIVE PANEL HEATER: KEY TEK wall mount space heater paintable and graffitiable, you can color this to fit your own home style. Our panel heater....
  • CONVENIENT ASSEMBLING: Wall-mounted heater is easy to install. Just mark the positions of the four holes to be drilled in the wall(install the heater....
  • ENERGY SAVING & SAFE: KEY TEK Panel heater is a good choice if you want to use your wall mount heater for a long period of time because of its energy....
  • SUPER QUIET & NO STIRRED-UP DUST: This Convector Heater is designed without Fan, which means 100% quiet and no stirred-up dust in the air, ideal for....
  • WILD APPLICATION: Gypsum board panel heaters fits for indoor place such as living room, bedroom, office and so on. It is worth mentioning that our....
Check Stock

NeatHeat Inside Corner 135 Baseboard Heater Cover

  • Baseboarders Basic Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you..
  • Baseboarders Basic Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will bec....
Check Stock

Baseboarders Premium 4 ft Galvanized Steel Easy Slip-On Baseboard Heater Cover - White (No Accessory)

  • ...sed EC001-RT,LF-WHT, Open EC002-RT,LF-WHT, Zero ZC001-WHT)are sold separately. When combined with end caps the panel can span between 48”-51.5”.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Premium Series panels. They will not retrofit to existing baseboard heaters without a Premium Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the or....
Check Stock

Baseboarders Elliptus Series Galvanized Steel Easy Slip-On Baseboard Heater Cover in White (2 ft, Cover, No Accessory)

  • ...sed EC005-LF,RT-WHT, Open EC006-LF,RT-WHT, Zero ZC005-WHT) are sold separately. When combined with end caps the panel can span between 24”-27.5”.
  • Baseboarders Elliptus Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the orig....
Check Stock

Baseboarders Premium Galvanized Steel Inside 90 Degree Corner Connector - White (Any Size)

  • Baseboarders Premium Series Inside 90-degree Corner is used to connect two panels that intersect at an inside 90 degree relation to one another with heaters pointing away from you.
  • Baseboarders Premium Series end caps, corners, and couplers are only compatible with our own branded Basic Series panels. They will not retrofit to existing baseboard heaters without a Basic Series Panel. This ensures the best fit, and safety design- both child proof and pet proof- for a modern, ultra clean look.
  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will ....
Check Stock

Deepwater Horizon [DVD]

  • Consistent hot water when you need it that never runs out.
  • Continuously monitored water temperature and controlled flow rates ensure efficiency and consistent performance within 1 degree of selected temperature.
  • EcoSmart tankless electric water heaters are 90% smaller than traditional tank heaters.
  • may be installed on wall or at point of use.
  • EcoSmart tankless electric water heaters are 99% thermal energy efficient.
  • Only heats water when called unlike a tank heater that maintains water temperature even when not being used. Save up to 50% in water heating costs according to the Department of Energy.
  • Refer to the sizing map. Requires 3x40 AMP Double Pole Breaker, 27-kilowatt tankless electric water heater ideal for providing hot water for whole home applications.
  • provides between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.
  • refer to the sizing guide to select the proper solution.
  • Limited Lifetime Warranty on electronics, exchanger and element.
  • Required Breaker Quantity: Three 40 Amp Double Pole.
Check Stock

A Walk into Hell

  • Consistent hot water when you need it that never runs out.
  • Continuously monitored water temperature and controlled flow rates ensure efficiency and consistent performance within 1 degree of selected temperature.
  • EcoSmart tankless electric water heaters are 90% smaller than traditional tank heaters.
  • may be installed on wall or at point of use.
  • EcoSmart tankless electric water heaters are 99% thermal energy efficient.
  • Only heats water when called unlike a tank heater that maintains water temperature even when not being used. Save up to 50% in water heating costs according to the Department of Energy.
  • Refer to the sizing map. Requires 3x40 AMP Double Pole Breaker, 27-kilowatt tankless electric water heater ideal for providing hot water for whole home applications.
  • provides between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.
  • refer to the sizing guide to select the proper solution.
  • Limited Lifetime Warranty on electronics, exchanger and element.
  • Required Breaker Quantity: Three 40 Amp Double Pole.
Check Stock

I'm a Shoe

  • Consistent hot water when you need it that never runs out.
  • Continuously monitored water temperature and controlled flow rates ensure efficiency and consistent performance within 1 degree of selected temperature.
  • EcoSmart tankless electric water heaters are 90% smaller than traditional tank heaters.
  • may be installed on wall or at point of use.
  • EcoSmart tankless electric water heaters are 99% thermal energy efficient.
  • Only heats water when called unlike a tank heater that maintains water temperature even when not being used. Save up to 50% in water heating costs according to the Department of Energy.
  • Refer to the sizing map. Requires 3x40 AMP Double Pole Breaker, 27-kilowatt tankless electric water heater ideal for providing hot water for whole home applications.
  • provides between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.
  • refer to the sizing guide to select the proper solution.
  • Limited Lifetime Warranty on electronics, exchanger and element.
  • Required Breaker Quantity: Three 40 Amp Double Pole.
Check Stock