Best Vortex Red Dot For Glock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

...ot fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury..

Check Stock

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

...vetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included).Promotes rapid target acquisition while providing a precise point of aim.
getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.

Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

...e recommend hiring a professional gunsmith.
New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
Promotes rapid target acquisition while providing a precise point of aim.
getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.

Check Stock

Mission First Tactical Holster Compatible with Glock 43 IWB

APPENDIX CARRY Inside the Waist Band holster will conceal your weapon and allow fast access for draw.
RED DOT SIGHT RDS for Trijicon or Vortex or any brand work with this holster no changing sights just clip in and go.
AMBIDEXTROUS wear right or left handed with 1.5inch belt clip adjustable cant from 0-20 degrees.
MATERIALS made from Superior .08 Boltaron not Kydex laser CAD design for perfect first made by hand.
The Box: 1 holster with belt clip, spacer, fits, Compatible with GLOCK 42: 380 ACP and GLOCK 43: 9MM.

Check Stock

Mission First Tactical Holster Compatible with Glock 19 IWB

APPENDIX CARRY Inside the Waist Band holster will conceal your weapon and allow fast access for draw.
RED DOT SIGHT RDS for Trijicon or Vortex or any brand work with this holster no changing sights just clip in and go.
AMBIDEXTROUS wear right or left handed with 1.5inch belt clip adjustable cant from 0-20 degrees.
MATERIALS made from Superior .08 Boltaron not Kydex laser CAD design for perfect first made by hand.
The Box: 1 holster with belt clip fits, spacer, Compatible with GLOCK 19 17 26 9MM, 22 23 27 40SW and GLOCK 33 34 47.

Check Stock

LONJN Glock 17 19 22 23 26 27 34 Mount - Vortex Venom Mount Glock Mounting Plate Vortex Viper Mount for Glock Glock Mount Plate for Red Dot Burris Sightmark Vortex Mini Sight

Pistol mount plate fits GLOCK 17 19 22 23 26 27 34..
Fits Vortex Viper/Venom micro red dot sight.
Fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a, fits Sightmark mini shot reflex sight.
Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the....
WO WOLTIS,Caution: NOT fit RMR, RMS, Doctor..

Check Stock

Vector Optics Sphinx Mini Red Dot Scope Sight Mount Base for Pistol Glock M1911 SIG Sauer P226 Baretta 92 Springfield XD Smith & Wesson M&P HK USP Black Glock

Designed for GLOCK pistol to fit Vector Optics Sphinx Red Dot Sight or Green Dot Sight, Vortex Venom, Burris FastFire and similar style mini Red dot....
Lightweight, Shockproof, Weatherproof. Designed for real fire caliber..
Full metal, heavy duty. Made of high quality 6061 T6 aluminum alloy in durable black matte finish..
Remove your rear sight before installing the mount base. Including 2 screws, 1 steel bar and 1 plate..

Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

...work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex Venom/Viper, Doctor, Burris Fastfire, Shield RMS/RMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike..

Check Stock

Kingslayer

This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....

Check Stock